nRFgo Studio hangs when having two j-link kits connected at the same time.

RE: nRFgo Studio hangs when having two j-link kits connected at the same time.

andlier — Thu, 04 Jun 2015 10:31:34 GMT

Forget what I said about the usb-hub. It doesn't work even without hub. Still hangs the same way. I was only fooled because it took a few seconds before the efm32-kit got recognized. I don't really need this to work, but it would be nice to know the cause. But if you can't reproduce, that's fine, maybe something else is going on with my pc...

RE: nRFgo Studio hangs when having two j-link kits connected at the same time.

andlier — Thu, 04 Jun 2015 10:13:14 GMT

Maybe, if you have access to the source-code, have a look at how the nrfjprog translate serial-number to which kit it connects to, vs. how the same process is done in nrfgo Studio.

RE: nRFgo Studio hangs when having two j-link kits connected at the same time.

andlier — Thu, 04 Jun 2015 10:08:57 GMT

ok, thanks for trying to reproduce. I did a bit more digging and found out it only hangs if I have the EFM32 kit and the nordic kit connected to the PC through the same usb-hub. If I have the nordic kit through the hub and the efm32-kit directly to the PC, it works. I still think it is related to nrfgo studio, because addressing the kits by serial number even if they are on the same hub, works fine from both Keil and with nrfjprog cmd-line-tool. All of which uses the same Segger driver.

RE: nRFgo Studio hangs when having two j-link kits connected at the same time.

Øyvind Karlsen — Thu, 04 Jun 2015 06:57:46 GMT

Hi again,

I have attempted to recreate the error with the EFM32GG-STK3700, however I am not getting the consistent results that you are. However inconsistencies do occur when using several development kits at once, but so far nothing that has been possible to recreate. From the information you have given it seems that this might be a SEGGER error, I would suggest asking on their forums.

RE: nRFgo Studio hangs when having two j-link kits connected at the same time.

andlier — Tue, 02 Jun 2015 14:42:53 GMT

The EFM32GG giant gecko kit, latest firmware. Also latest j-link-firmware on the nordic kits (4 May 2015 firmware). It's not a big issue, just a nuisance. Using nrfjprog mostly, which works fine with the --snr option. But its nice to be able to have nrfgo studio open when I measure power consumption with the efm32-kit, without having to plug it out and in again every time I need do something in nrfgo studio.

RE: nRFgo Studio hangs when having two j-link kits connected at the same time.

Øyvind Karlsen — Tue, 02 Jun 2015 08:53:25 GMT

Hi,

I will try to replicate the error, which EFM32 kit are you using?