How to add 5340 rtc to an empty project?

RE: How to add 5340 rtc to an empty project?

Albrecht Markus Schellenberger — Thu, 06 May 2021 13:51:16 GMT

Hello,

Since your last question is a little bit out of the scope of the original case topic: is it ok for you if we close this case and you create a new one for it? Thanks!

Regards,

Markus

RE: How to add 5340 rtc to an empty project?

Август — Thu, 06 May 2021 00:36:25 GMT

Hi，

We use an oscilloscope to measure the waveform of the IO port.

RE: How to add 5340 rtc to an empty project?

Albrecht Markus Schellenberger — Fri, 30 Apr 2021 13:59:22 GMT

Hello again,

How did you measure the actual frequency created by your application?

Regards,

Markus

RE: How to add 5340 rtc to an empty project?

Albrecht Markus Schellenberger — Thu, 29 Apr 2021 07:39:12 GMT

Thanks for the code! I will have a look into it and come back to you as soon as possible.

I would appreciate some feedback if you are able to solve the issue yourself during this time. Thanks!

Cheers,

Markus

RE: How to add 5340 rtc to an empty project?

Август — Wed, 28 Apr 2021 08:24:55 GMT

Hi Markus,

Thank you.

I have used rtc to generate a waveform, but it is less than 1khz, the actual test is 964hz.

Did I do something wrong?

Here is my code.

I need your help. Thank you.

devzone.nordicsemi.com/.../7674.1khz.zip

RE: How to add 5340 rtc to an empty project?

Albrecht Markus Schellenberger — Tue, 27 Apr 2021 12:52:27 GMT

You can create an overlay file with the same name as your build target and place it in either the top folder of your project (along with prj.conf and CMakeLists.txt) or as shown in the nrf_rtc_timer application, in ../nrf_rtc_timer_/boards.

The overlay file needs to have the same name as your build target. Considering you are compiling for nrf5340dk_nrf5340_cpuapp, the name of the overlay file would be: nrf5340dk_nrf5340_cpuapp.overlay.

A good way to check if the compiler considers the overlay file is to check the build log:

-- Found devicetree overlay: C:/Users/<user>/ncs/v1.5.1/zephyr/tests/drivers/timer/nrf_rtc_timer/boards/nrf5340dk_nrf5340_cpuapp.overlay

Additionally, you can cross-check your ../<build-folder>/zephyr/zephyr.dts to confirm that the changes made in the overlay file are correct.

I hope this will be help you!

Cheers,

Markus

RE: How to add 5340 rtc to an empty project?

Август — Tue, 27 Apr 2021 01:24:22 GMT

Thank you for your quick reply.

Can you give me some advice on how to change nrf52840dk_nrf52840.overlay to nrf5340.overlay

Thank you

RE: How to add 5340 rtc to an empty project?

Albrecht Markus Schellenberger — Mon, 26 Apr 2021 11:29:56 GMT

Hello,

You can use this example for the nRF5340 DK as well. The application just includes an overlay file for the nRF52840 DK to modify some interrupt properties.

Regards,

Markus