https://devzone.nordicsemi.com/f/nordic-q-a/74481/nrf9160-adcDear Sir. adc configured like #define ADC_DEVICE_NAME DT_ADC_0_NAME #define ADC_RESOLUTION 10 #define ADC_GAIN ADC_GAIN_1_6 #define ADC_REFERENCE ADC_REF_INTERNAL #define ADC_ACQUISITION_TIME ADC_ACQ_TIME(ADC_ACQ_TIME_MICROSECONDS, 10) #defineen-USTelligent Community 13Wed, 28 Apr 2021 16:46:15 GMThttps://devzone.nordicsemi.com/thread/307310?ContentTypeID=1Wed, 28 Apr 2021 16:46:15 GMT137ad170-7792-4731-bb38-c0d22fbe4515:3d65b1ed-5259-4ead-a9dd-2bebce22cbe7Marjeris Romero<p>Hi,</p> <p>These readings are directly taken from the adc buffer right? Perhaps try converting the reading so you are able to read the resistance of the thermistor as measured with a multimeter to check if the readings make sense or not.</p> <p><br /> Remember that the thermistor accuracy is not very high, but you should be able to see a pattern of the readings going up and down depending on temperature of the thermistor.<br /><br />See: <a href="https://learn.adafruit.com/thermistor/using-a-thermistor">https://learn.adafruit.com/thermistor/using-a-thermistor</a><br /><br />Best regards,</p> <p>Marjeris</p><div style="clear:both;"></div>