Asset Tracker V2 - Real-time Configurations

RE: Asset Tracker V2 - Real-time Configurations

Markus Tacker (he/him) — Fri, 18 Jun 2021 11:19:57 GMT

On the latest version of the asset_tracker_v2 it works, so if possible try to upgrade to the latest version as soon as it is released.

RE: Asset Tracker V2 - Real-time Configurations

Paul Oberauer — Thu, 17 Jun 2021 16:49:16 GMT

devzone.nordicsemi.com/.../log_5F00_file.txt

RE: Asset Tracker V2 - Real-time Configurations

Markus Tacker (he/him) — Thu, 17 Jun 2021 15:54:50 GMT

Could you enable debug logging?

RE: Asset Tracker V2 - Real-time Configurations

Paul Oberauer — Thu, 17 Jun 2021 13:28:19 GMT

2021-06-17T13:15:19.031Z DEBUG modem << [00:00:00.244,689] [0m<inf> event_manager: APP_EVT_START[0m
2021-06-17T13:15:19.072Z DEBUG modem << [00:00:00.270,751] [0m<inf> event_manager: DATA_EVT_CONFIG_INITle timer: 120 seconds interval[0m
2021-06-17T13:15:20.597Z DEBUG modem << [00:00:00.352,905] [0m<inf> event_manager: MODEM_EVT_LTE_CONNEC[00:00:01.803,344] [0m<inf> event_manager: MODEM_EVT_LTE_DISCONT_LTE_CELL_UPDATE[0m
2021-06-17T13:15:22.430Z DEBUG modem << [00:00:03.613,220] [0m<inf> event_manager: MODEM_EVT_LTE_CONNECTED[0m
2021-06-17T13:15:22.435Z DEBUG modem << [00:00:03.619,720] [0m<inf> event_manager: MODEM_EVT_L Cloud connection establishment in progress[0m
2021-06-17T13:15:29.363Z DEBUG modem << [00:00:03.634,3nds if not successful[0m
2021-06-17T13:15:29.546Z DEBUG modem << [00:00:03.643,676] [0m<inf> event_ma[00:00:10.577,056] [0m<inf> event_manager: CLOUD_EVT_CONNECTED[00:00:10.748,535] [0m<inf> event_manager: DATA_EVT_DATE_TIME_OBTAINED[0m
2021-06-17T13:15:29.552Z DEBUG modem << [00:00:10.755,493] [0m<inf> event_manager: APP_EVTTAT)[0m
2021-06-17T13:15:29.553Z DEBUG modem << TAT)[0m
2021-06-17T13:15:29.566Z DEBUG modem << [00:00:10.773,895] [0m<inf> event_manager: GPS_EVT_ACTIVE[0m
2021-06-17T13:15:29.577Z DEBUG modem << [00:00:10.789,794] [0m<inf> event_manager: SENSOR_EVT_ENVIRONMENTAL_DATA_READY[0m
2021-06-17T13:15:29.699Z DEBUG modem << [00:00:10.828,186] [0m<inf> event_manager: MODEM_EVT_MODEM_STAT[00:00:10.870,208] [0m<inf> event_manager: MODEM_EVT_MODEM_DYNA[00:00:10.912,231] [0m<inf> event_manager: MODEM_EVT_BATTERY_DATA_READY[0m
2021-06-17T13:16:33.775Z DEBUG modem << [00:01:14.979,949] [0m<inf> event_manager: GPS_EVT_TIMEOUT[0m
2021-06-17T13:16:33.781Z DEBUG modem << m
2021-06-17T13:16:33.832Z DEBUG modem << [00:01:14.991,607] [0m<inf> event_manager: DATA_EVT_DATA_REA[00:01:15.007,019] [0m<inf> event_manager: DATA_EVT_DATA_SEND[[00:01:15.048,919] [0m<inf> event_manager: CLOUD_EVT_DATA_ACK[

here I have changed the shadow
2021-06-17T13:17:19.083Z DEBUG modem << [00:02:00.290,740] [0m<inf> event_manager: APP_EVT_DATA_GET_ALL[0m
2021-06-17T13:17:19.144Z DEBUG modem << [00:02:00.297,119] [0m<inf> event_manager: APP_EVT_DATA_G[00:02:00.363,159] [0m<inf> event_manager: GPS_EVT_ACTIVE[0m
2021-06-17T13:17:19.199Z DEBUG modem << [00:02:00.373,260] [0m<inf> event_manager: SENSOR_EVT_ENVIRONME[00:02:00.392,944] [0m<inf> event_manager: MODEM_EVT_MODEM_DYNA[00:02:00.415,863] [0m<inf> event_manager: MODEM_EVT_BATTERY_DATA_READY[0m
2021-06-17T13:18:23.170Z DEBUG modem << [00:03:04.378,784] [0m<inf> event_manager: GPS_EVT_TIMEOUT[0m
2021-06-17T13:18:23.189Z DEBUG modem << m
2021-06-17T13:18:23.191Z DEBUG modem << [00:03:04.390,472] [0m<inf> event_manager: DATA_EVT_DATA_REAm
2021-06-17T13:18:23.223Z DEBUG modem << [00:03:04.390,472] [0m<inf> event_manager: DATA_EVT_DATA_REA[00:03:04.402,221] [0m<inf> event_manager: DATA_EVT_DATA_SEND[[00:03:04.444,061] [0m<inf> event_manager: CLOUD_EVT_DATA_ACK[0m
2021-06-17T13:19:19.078Z DEBUG modem << [00:04:00.290,740] [0m<inf> event_manager: APP_EVT_DATA_GET_ALLET - Requested data types (MOD_DYN, BAT, ENV, GNSS)[0m
2021-06-17T13:19:19.140Z DEBUG modem << [00:04:00.363,281] [0m<inf> event_manager: GPS_EVT_ACTIVE[0m

RE: Asset Tracker V2 - Real-time Configurations

Markus Tacker (he/him) — Thu, 17 Jun 2021 10:50:49 GMT

That should be version 1.5.0 as well.

There have been quite a few changes since then, and we are about to release version 1.6 of nRF Connect SDK. You could have a look at that: https://github.com/nrfconnect/sdk-nrf/milestone/14

What would be interesting is too see the device logs from a device which is running in active mode, and where you then switch to passive mode on the cloud.

RE: Asset Tracker V2 - Real-time Configurations

Paul Oberauer — Thu, 17 Jun 2021 10:45:55 GMT

Unfortunately i don't know where i can find out the version of the asset tracker V2. But I use the version which is included in nRF SDK v1.5.0 Toolchain Manager which I downloaded on 12.04.2021.

RE: Asset Tracker V2 - Real-time Configurations

Markus Tacker (he/him) — Thu, 17 Jun 2021 10:23:05 GMT

And which version of the asset_tracker_v2?

RE: Asset Tracker V2 - Real-time Configurations

Paul Oberauer — Thu, 17 Jun 2021 10:22:28 GMT

I use the mfw_nrf9160_1.2.3 firmware

RE: Asset Tracker V2 - Real-time Configurations

Markus Tacker (he/him) — Thu, 17 Jun 2021 10:08:32 GMT

Ok, that's not expected.

Which version of the firmware are you running?

RE: Asset Tracker V2 - Real-time Configurations

Paul Oberauer — Thu, 17 Jun 2021 09:36:14 GMT

I am currently in active mode and trying to switch to passive mode via the real time configuration. For this I change the shadow in aws IoT (Manage -> Things->myThingy->Shadows ->Classic Shadow->Edit) like this:

"cfg": {
"act": false,
"gpst": 60,
"actwt": 120,
"mvres": 120,
"mvt": 3600,
"acct": 10
},

Even after waiting for a longer time and switching off/on, it does not switch to passive mode.

If I recompile Asset Tracker V2 and flash it to the Thingy91, then the shadow changes back to
"cfg": {
"act": true,
"gpst": 60,
"actwt": 120,
"mvres": 120,
"mvt": 3600,
"acct": 10
},
and does not take over the previously set values.

RE: Asset Tracker V2 - Real-time Configurations

Markus Tacker (he/him) — Wed, 16 Jun 2021 15:01:52 GMT

[quote userid="104288" url="~/f/nordic-q-a/75809/asset-tracker-v2---real-time-configurations/315675#315675"]Can I just edit the shadow and the configurations will be applied? Or how does that work exactly?[/quote]

Yes, that is what the web application does as well, it modifies the desired.cfg properties in the device's shadow.

[quote userid="104288" url="~/f/nordic-q-a/75809/asset-tracker-v2---real-time-configurations/315675#315675"]Unfortunately I have problems how to set the real time configurations inaws-IoT.[/quote]

Can you specify what problems you are facing?

RE: Asset Tracker V2 - Real-time Configurations

Paul Oberauer — Wed, 16 Jun 2021 14:44:33 GMT

Thank you very much for your answer. Unfortunately I have problems how to set the real time configurations inaws-IoT. Can I just edit the shadow and the configurations will be applied? Or how does that work exactly?

thanks in advance

RE: Asset Tracker V2 - Real-time Configurations

Øyvind — Mon, 31 May 2021 12:03:19 GMT

Hello,

According to the Asset Tracker v2 documentation, this should be possible from the cloud side:

The device retrieves its real-time configurations from the cloud service in either of the following ways:

Upon every established connection to the cloud service, the application will always request its cloud-side device state that contains the latest real-time configurations.
When the device exits Power Saving Mode (PSM) to publish data, and if the cloud-side device configuration has been updated while the device was in PSM, the application will request for the newly changed configuration.

Kind regards,
Øyvind