nRF Connect Programmer hangs on start

RE: nRF Connect Programmer hangs on start

Jared — Mon, 19 Jul 2021 09:13:05 GMT

Hi,

Thank you for this additional information. I'll update our internal team that is currently investigating this.

best regards

Jared

RE: nRF Connect Programmer hangs on start

Jackson Wilson — Fri, 16 Jul 2021 13:52:18 GMT

Additional debugging:

I tested a second computer with the same EVK and nRF Connect/Programmer versions and everything worked.

Then I went back to the initial machine (System Report above) and removed all other USB hubs and devices. In that configuration Programmer functions correctly.

By process of elimination I found that a Brother ADS-1200 scanner causes the failure of Programmer to start and/or detect attached J-Link. Or, powering off the scanner fixes Programmer (not enumerated in Device Manager).

There is some USB conflict with the scanner.

I can work around this issue, but it should be investigated and addressed by Nordic to ensure that the Programmer functions regardless of other USB devices connected to the computer.

RE: nRF Connect Programmer hangs on start

Jared — Fri, 16 Jul 2021 11:33:22 GMT

Hi,

I haven't, I tried reproducing it by wasn't able to. It worked fine on my end.

[quote user="jwilson"]

Is it possible to revert to earlier version of Programmer app to test if it happens with various versions?

[/quote]

See this answer on how to downgrade nRF Connect apps to an earlier version.

regards

Jared

RE: nRF Connect Programmer hangs on start

Jackson Wilson — Thu, 15 Jul 2021 13:51:18 GMT

Have you seen this behavior at your end?

Is it possible to revert to earlier version of Programmer app to test if it happens with various versions?

Below is the system configuration (NOTE: the "System Report" function identifies the PCA10040 EVK, but Programmer may still hang when attempting to "Select Device"):

# nRFConnect System Report - 2021-07-15T13-30-47.129Z

- System: HP HP ProBook 470 G5
- BIOS: HP HPQOEM - 0
- CPU: 1 x Intel® Core™ i7-8550U 1.8 GHz 8 cores (4 physical)
- Memory: 18.1 GB free of 31.9 GB total
- Filesystem: C: (NTFS) 1.8 TB 20.1% used

- OS: Microsoft Windows 10 Pro (10.0.18363) win32 ia32

- Versions
- kernel: 10.0.18363
- git: 2.22.0.windows.1
- node: 12.13.0
- python: 3.9.0
- python3:

- Connected devices:
- COM3: 000682229075 PCA10040

RE: nRF Connect Programmer hangs on start

Jared — Thu, 15 Jul 2021 12:03:59 GMT

Ok, We've started an internal investigation into this issue. I'll update you when we have more information.

Please expect some delay as many of us are out of office due to the summer vacation.

regards

Jared

RE: nRF Connect Programmer hangs on start

Jackson Wilson — Wed, 14 Jul 2021 16:09:10 GMT

Still fails with v6.88a or v7.50a. Yesterday it worked for a while with v7.50a, now it hangs with either driver.

Pressing CTRL+R repeatedly eventually gets Programmer screen to come up, but selecting EVK causes blank screen/hang again.

Very erratic behavior -- occasionally Programmer can recognize EVK and function, but it usually takes multiple CTRL+R to get this to happen. This seems to be the case with J-Link v6.88a and v7.50a.

Once EVK is recognized, Programmer seems to work correctly.

RE: nRF Connect Programmer hangs on start

Jared — Wed, 14 Jul 2021 12:25:04 GMT

Hi,

Could you try updating to jlink v6.88a?

regards

Jared