nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

Amanda Hsieh — Fri, 11 Mar 2022 10:08:31 GMT

Hi,

Not sure what you want to ask. If it's related to throughput, please see this sample Bluetooth: Throughput.

I would suggest you create a new case for your own issue.

-Amanda

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

Ashishsult — Fri, 11 Mar 2022 09:02:14 GMT

Hi Amanda, have you tested it for long packet size such as 50 bytes?

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

Amanda Hsieh — Tue, 03 Aug 2021 13:10:56 GMT

Hi,

I use nRF52840 DK.

If you are still not able to get the kit to work, you should then buy a new nRF52840 DK. The nRF52840 Preview DK is now deprecated and not recommended for development, as the preview kits contain early engineering samples from before the chip was qualified. The engineering samples are not supported in the latest SDK versions either.

-Amanda H.

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

yuyin — Tue, 03 Aug 2021 12:58:57 GMT

OK, thank you for your reply timely.

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

yuyin — Tue, 03 Aug 2021 12:25:56 GMT

Hi Amanda ,

which board you test the issue, 52840 Preview DK or 52840 DK board?

I am using the 52840 Preview DK, does it have the problem?

The PC I am using only have one serial port via DK.

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

Amanda Hsieh — Tue, 03 Aug 2021 07:54:44 GMT

Hi,

[quote user="yuyin"]Q1: Did you rebuild the SDK based on v1.6.1 I gave you before download it? is it possible the problem related to SES (v5.50d 64-bits) config?[/quote]

I use the zephyr.hex under periodic_sync_v01\build_nrf52840dk_nrf52840 and rebuild with the same version of SES as yours. Both two can work.

[quote user="yuyin"]Q2: Why my platform can not log output? and how could i fix this?[/quote]

Do you use the correct serial port of the DK via Device manager Windows? You could try another one. Or maybe you would try thisdevzone.nordicsemi.com/.../periodic_5F00_sync.zip.

-Amanda H

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

yuyin — Tue, 03 Aug 2021 02:24:31 GMT

Hi Amanda,

I reopen the SES several times, the issue still exist.

I have two questions :

Q1: Did you rebuild the SDK based on v1.6.1 I gave you before download it? is it possible the problem related to SES (v5.50d 64-bits) config?

Q2: Why my platform can not log output? and how could i fix this?

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

Amanda Hsieh — Mon, 02 Aug 2021 13:30:47 GMT

Hi,

Do you have another DK running periodic_adv at the same time?

Your project can work on my side.

*** Booting Zephyr OS build v2.6.0-rc1-ncs1  ***

Starting Periodic Advertising Synchronization Demo

Checking LED device...done.

Configuring GPIO pin...done.

Scan callbacks register...success.

Periodic Advertising callbacks register...Success.

Start scanning...success.

Start blinking LED...

Waiting for periodic advertising...

[00:00:00.258,300] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)

[00:00:00.258,300] <inf> bt_hci_core: HW Variant[DEVICE]: B9:D7:13:00:00:10 (public), AD evt type 0, Tx Pwr: 127, RSSI -83 Tier C:1 S:1 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

[DEVICE]: B9:D7:12:6F:F0:1D (public), AD evt type 0, Tx Pwr: 127, RSSI -87 Tier C:1 S:1 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

: nRF52x (0x0002)

[00:00:00.258,331] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 2.6 Build 0

[00:00:00.258,880] <inf> bt_hci_core: Identity: DA:20:CF:24:38:05 (random)

[00:00:00.258,880] <inf> b[DEVICE]: B9:D7:12:6F:F0:1D (public), AD evt type 4, Tx Pwr: 127, RSSI -82  C:1 S:1 D:0 SR:1 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

t_hci_core: HCI: version 5.2 (0x0b) revision 0x0000, manufacturer 0x05f1

[00:00:00.258,880] <inf> bt_hci_core: LMP: version 5.2 (0x0b) subver 0xffff

[DEVICE]: 13:5C:A8:05:2A:44 (random), AD evt type 5, Tx Pwr: 127, RSSI -33 Test Periodic Advertising C:0 S:0 D:0 SR:0 E:1 Prim: LE 1M, Secn: LE 2M, Interval: 0x0780 (2400 ms), SID: 0

Found periodic advertising.

Creating Periodic Advertising Sync...success.

Waiting for periodic sync...

[DEVICE]: 04:E8:6F:0B:76:6D (random), AD evt type 3, Tx Pwr: 127, RSSI -86  C:0 S:0 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

PER_ADV_SYNC[0]: [DEVICE]: 13:5C:A8:05:2A:44 (random) synced, Interval 0x0780 (2400 ms), PHY LE 2M

[DEVICE]: B9:D7:13:00:10:1D (public), AD evt type 0, Tx Pwr: 127, RSSI -83 Tier C:1 S:1 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

[DEVICE]: B9:D7:13:00:10:1D (public), AD evt type 4, Tx Pwr: 127, RSSI -84  C:1 S:1 D:0 SR:1 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

Periodic sync established.

Stop blinking LED.

Waiting for periodic sync lost...

[DEVICE]: 3C:4B:BD:B5:76:58 (random), AD evt type 3, Tx Pwr: 127, RSSI -90  C:0 S:0 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

PER_ADV_SYNC[0]: [DEVICE]: 13:5C:A8:05:2A:44 (random), tx_power 127, RSSI -30, CTE 1, data length 5, data: 04ffffffa2

PER_ADV_SYNC[0]: [DEVICE]: 13:5C:A8:05:2A:44 (random), tx_power 127, RSSI -30, CTE 1, data length 5, data: 04ffffffa5

PER_ADV_SYNC[0]: [DEVICE]: 13:5C:A8:05:2A:44 (random), tx_power 127, RSSI -30, CTE 1, data length 5, data: 04ffffffa7

Try to reload the project or reopen the Segger project to make the config effective.

-Amanda

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

yuyin — Mon, 02 Aug 2021 13:08:06 GMT

Hi Amanda ,

The project SDK you attached is work well on my 52840DK, and ellisys can capture the sync pkt also.

Besides, on my local PC I am using v1.6.1 SDK;

This is the SDK I download from nRF Connect v3.7.0 ToolChain Manager;

I add the CONFIG_BT_LL_SW_SPLIT=y into prj.conf of periodic_sync, but it still not work.

devzone.nordicsemi.com/.../periodic_5F00_sync_5F00_v01.zip

Can you help check the reason why my sdk not work?

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

Amanda Hsieh — Mon, 02 Aug 2021 09:17:06 GMT

Hi,

00> [00:00:00.746,978] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 2.4 Build 99

Are you using v1.6.1?

After updating prj.conf, you need to reload the project to make it effective. You could try this devzone.nordicsemi.com/.../periodic_5F00_adv.zip.

-Amanda H.

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

yuyin — Sat, 31 Jul 2021 06:31:49 GMT

hi Amanda ，

Very glad receive your reply. The test log show as below, it still looks not work.

00> [00:00:00.746,948] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)
00> [00:00:00.746,978] <inf> bt_hci_core: HW Variant: nRF52x (0x0002)
00> [00:00:00.746,978] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 2.4 Build 99
00> [00:00:00.747,528] <inf> bt_hci_core: Identity: F5:75:13:83:84:7C (random)
00> [00:00:00.747,528] <inf> bt_hci_core: HCI: version 5.2 (0x0b) revision 0x0000, manufacturer 0x05f1
00> [00:00:00.747,528] <inf> bt_hci_core: LMP: version 5.2 (0x0b) subver 0xffff
(Connection lost)(Connection lost)
00> [00:00:00.695,770] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)
00> [00:00:00.695,800] <inf> bt_hci_core: HW Variant: nRF52x (0x0002)
00> [00:00:00.695,800] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 2.4 Build 99
00> [00:00:00.696,350] <inf> bt_hci_core: Identity: F5:75:13:83:84:7C (random)
00> [00:00:00.696,350] <inf> bt_hci_core: HCI: version 5.2 (0x0b) revision 0x0000, manufacturer 0x05f1
00> [00:00:00.696,350] <inf> bt_hci_core: LMP: version 5.2 (0x0b) subver 0xffff

I use the SES IDE, it seems the log not print out, and I can not make it works.

The 52840DK board led1 blink priodically, the ellisys not capture any extend adv pkt either.

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

Amanda Hsieh — Fri, 30 Jul 2021 11:58:18 GMT

Hi,

Have a look at the response Sigurd provided in this post.

I add CONFIG_BT_LL_SW_SPLIT=y into prj.conf of periodic_sync and periodic_adv. One DK runs periodic_adv and get the log like this:

*** Booting Zephyr OS build v2.6.0-rc1-ncs1  ***

Starting Periodic Advertising Demo

[00:00:00.276,367] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)

[00:00:00.276,367] <inf> bt_hci_core: HW Variant: nRF52x (0x0002)

[00:00:00.276,397] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0                                                                                                                                                             x00) Version 2.6 Build 0

[00:00:00.276,947] <inf> bt_hci_core: Identity: FA:B0:6E:34:31:BE (random)

[00:00:00.276,947] <inf> bt_hci_core: HCI: version 5.2 (0x0b) revision 0x0000, m                                                                                                                                                             anufacturer 0x05f1

[00:00:00.276,947] <inf> bt_hci_core: LMP: version 5.2 (0x0b) subver 0xffff

Set Periodic Advertising Data...done.

Set Periodic Advertising Data...done.

Set Periodic Advertising Data...done.

Set Periodic Advertising Data...done.

Set Periodic Advertising Data...done.

Set Periodic Advertising Data...done.

Set Periodic Advertising Data...done.

Set Periodic Advertising Data...done.

Another DK runs periodic_sync and get the log like this

*** Booting Zephyr OS build v2.6.0-rc1-ncs1  ***

Starting Periodic Advertising Synchronization Demo

Checking LED device...done.

Configuring GPIO pin...done.

Scan callbacks register...success.

Periodic Advertising callbacks register...Success.

Start scanning...success.

Start blinking LED...

Waiting for periodic advertising...

[00:00:00.258,514] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)

[00:00:00.258,514] <inf> bt_hci_core: HW Variant: nRF52x (0x0002)

[00:00:00.258,514] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 2.6 Build 0

[00:00:00.259,094] <inf> bt_hci_core: Identity: DA:20:CF:24:38:05 (random)

[00:00:00.259,094] <inf> bt_hci_core: HCI: version 5.2 (0x0b) revision 0x0000, manufacturer 0x05f1

[00:00:00.259,094] <inf> bt_hci_core: LMP: version 5.2 (0x0b) subver 0xffff

[DEVICE]: 59:67:CB:E2:45:60 (random), AD evt type 2, Tx Pwr: 127, RSSI -78  C:0 S:1 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

[DEVICE]: 59:67:CB:E2:45:60 (random), AD evt type 4, Tx Pwr: 127, RSSI -78  C:0 S:1 D:0 SR:1 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

[DEVICE]: 98:D6:BB:23:D7:AF (public), AD evt type 0, Tx Pwr: 127, RSSI -81  C:1 S:1 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

[DEVICE]: 0F:26:07:0C:5A:31 (random), AD evt type 5, Tx Pwr: 127, RSSI -38 Test Periodic Advertising C:0 S:0 D:0 SR:0 E:1 Prim: LE 1M, Secn: LE 2M, Interval: 0x0780 (2400 ms), SID: 0

Found periodic advertising.

Creating Periodic Advertising Sync...success.

Waiting for periodic sync...

[DEVICE]: 5D:07:B0:F2:BC:39 (random), AD evt type 3, Tx Pwr: 127, RSSI -36  C:0 S:0 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

PER_ADV_SYNC[0]: [DEVICE]: 0F:26:07:0C:5A:31 (random) synced, Interval 0x0780 (2400 ms), PHY LE 2M

Periodic sync established.

Stop blinking LED.

Waiting for periodic sync lost...

[DEVICE]: A4:30:7A:67:32:2C (public), AD evt type 0, Tx Pwr: 127, RSSI -85  C:1 S:1 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

PER_ADV_SYNC[0]: [DEVICE]: 0F:26:07:0C:5A:31 (random), tx_power 127, RSSI -38, CTE 1, data length 5, data: 04ffffffb0

[DEVICE]: 74:15:A4:DD:73:86 (random), AD evt type 4, Tx Pwr: 127, RSSI -81  C:1 S:1 D:0 SR:1 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

[DEVICE]: 59:67:CB:E2:45:60 (random), AD evt type 4, Tx Pwr: 127, RSSI -80  C:0 S:1 D:0 SR:1 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

PER_ADV_SYNC[0]: [DEVICE]: 0F:26:07:0C:5A:31 (random), tx_power 127, RSSI -39, CTE 1, data length 5, data: 04ffffffb3

[DEVICE]: 6C:4A:85:5A:95:F5 (public), AD evt type 0, Tx Pwr: 127, RSSI -82  C:1 S:1 D:0 SR:0 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

[DEVICE]: 6C:4A:85:5A:95:F5 (public), AD evt type 4, Tx Pwr: 127, RSSI -82  C:1 S:1 D:0 SR:1 E:0 Prim: LE 1M, Secn: No packets, Interval: 0x0000 (0 ms), SID: 255

PER_ADV_SYNC[0]: [DEVICE]: 0F:26:07:0C:5A:31 (random), tx_power 127, RSSI -40, CTE 1, data length 5, data: 04ffffffb5

If you still have the issue, please provide the logs. Thanks.

-Amanda H.

RE: nRF52840 DK can not advertising extension when using zephyr nRF Connect SDK v1.6.1

yuyin — Fri, 30 Jul 2021 11:41:23 GMT

how could I config the project, why I change the Configure nRF Connect SDK Project, but it not works.