nrf5340 - peripheral-lbs issue

RE: nrf5340 - peripheral-lbs issue

Amanda Hsieh — Mon, 06 Sep 2021 06:04:59 GMT

Happy to know it works.

-Amanda H.

RE: nrf5340 - peripheral-lbs issue

pekon94 — Fri, 03 Sep 2021 20:45:10 GMT

Hello Amanda, I was able to flash the board with the peripheral-lbas and now the board is having the expected behaviours. Thank you for your assistance.

RE: nrf5340 - peripheral-lbs issue

Amanda Hsieh — Tue, 31 Aug 2021 13:32:19 GMT

After programming hci_rpmsg to the netcore and perhipher-lbs to the appcore, What is the status of the DK after loading the images? Do you see the LED 1 blinks with a period of 2 seconds, duty cycle 50% (the device is advertising)?

RE: nrf5340 - peripheral-lbs issue

pekon94 — Tue, 31 Aug 2021 12:21:25 GMT

Yes

RE: nrf5340 - peripheral-lbs issue

Amanda Hsieh — Tue, 31 Aug 2021 12:17:45 GMT

Are you able to flash without '--recover'?

RE: nrf5340 - peripheral-lbs issue

pekon94 — Tue, 31 Aug 2021 12:01:06 GMT

Yes this is executed successfully

RE: nrf5340 - peripheral-lbs issue

Amanda Hsieh — Tue, 31 Aug 2021 10:24:09 GMT

Are you able to to run: west build -b nrf5340pdk_nrf5340_cpunet && west flash?

-Amanda

RE: nrf5340 - peripheral-lbs issue

pekon94 — Tue, 31 Aug 2021 09:49:34 GMT

Hello,

I am stuck at what variable to create for the nrfjprog directory path.

How should this variable be named?

By default when installed the nrfjprog, the directory was set to /opt/nrfjprog.

I just post again the error message I get when building (-- west flash: using runner nrfjprog
FATAL ERROR: runner nrfjprog received unknown arguments: ['--recover']) the v1.4.0\zephyr\samples\bluetooth\hci_rpmsg:

-- west flash: using runner nrfjprog
FATAL ERROR: runner nrfjprog received unknown arguments: ['--recover']

RE: nrf5340 - peripheral-lbs issue

Amanda Hsieh — Tue, 31 Aug 2021 08:22:02 GMT

I update the link http://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/gs_installing.html#set-up-the-command-line-build-environment

-Amanda

RE: nrf5340 - peripheral-lbs issue

pekon94 — Tue, 31 Aug 2021 07:56:22 GMT

Hello,

I have followed this procedure but don't know how to do the last step:

You must also make sure that nrfjprog (part of the nRF Command Line Tools) is installed and its path is added to the environment variables. The west command programs the development kit by using nrfjprog by default.

It is not described how to add the nrfjprog path to a (which) environment variable.

RE: nrf5340 - peripheral-lbs issue

Amanda Hsieh — Tue, 31 Aug 2021 06:42:47 GMT

Hi,

The procedure is the same.

On Linux, use the Getting Started Assistant or follow the steps found on the Installing NCS manually page. Have a look at the Set up the command-line build environment doc.

-Amanda

RE: nrf5340 - peripheral-lbs issue

pekon94 — Mon, 30 Aug 2021 15:19:20 GMT

I am using Linux,

is the procedure the same?

I am running the command but it fails when trying to use the nrfjprog (step -- west flash: using runner nrfjprog).

I have the nrfjprog installed, but I think I haven't done this step as mentioned in the "Set up the command-line build environment" instructions:

You must also make sure that nrfjprog (part of the nRF Command Line Tools) is installed and its path is added to the environment variables.

RE: nrf5340 - peripheral-lbs issue

Amanda Hsieh — Mon, 30 Aug 2021 11:24:34 GMT

Hi Petros,

[quote user="pekon94"]the board version is: PCA10095, 0.8.0, 2020.24[/quote]

The board is PDK. It is only supported by v1.4.0. See this note.

I would suggest you use west build to flash the network sample Bluetooth: HCI RPMsg as the known issue in the netcore as you see.

You could run the command via the command prompt.

locate under v1.4.0\zephyr\samples\bluetooth\hci_rpmsg and execute

west build -b nrf5340pdk_nrf5340_cpunet && west flash --recover

Then load the application by SES.

Or only execute west build and flash for the perhipher-lbs sample.

west build -b nrf5340pdk_nrf5340_cpuapp && west flash --recover

The network sample Bluetooth: HCI RPMsg is automatically added to all Bluetooth Low Energy samples in the nRF Connect SDK. When CONFIG_BT_RPMSG_NRF53 is set to y (the default), the build system automatically includes the sample as a child image in the nrf5340_pdk_nrf5340_cpunet core.

-Amanda H.

RE: nrf5340 - peripheral-lbs issue

pekon94 — Mon, 30 Aug 2021 09:32:35 GMT

Hello,

the board version is: PCA10095, 0.8.0, 2020.24

I was using NCS version v1.4.0 but I updated to v1.6.1 and tried again with the same result.

I use the SES. I was trying with the application sample. When I try to download the network sample I get the following error in SES output:

1) Failed to Download application

2) Error during programm/erase phase

3) Please check Jlink-target connection

4) Illegal value 0x210052E8 written to register 66 (MSP_NS) ignored

Previously, when loading the app sample of peripheral_lbs there was no change in the status of the DK. The LED didn't start blinking.

Thank you for your support.

RE: nrf5340 - peripheral-lbs issue

Amanda Hsieh — Mon, 30 Aug 2021 06:54:02 GMT

Hi,

What is the board version on the white sticker? Are you using NCS v1.6.1?

Do you program with SES or West? If you are using SES, do you program the network sample from SES?

What is the status of the DK after loading the images? Do you see the LED 1 blinks with a period of 2 seconds, duty cycle 50% (the device is advertising)?

Regards,

Amanda