Gazell not functioning inside SoftDevice timeslots

RE: Gazell not functioning inside SoftDevice timeslots

ImQ009 — Thu, 02 Jul 2015 13:49:30 GMT

Oh, I see. I have to redirect those radio events to RADIO_IRQHandler(); That worked! Awesome! Thank you so much!

RE: Gazell not functioning inside SoftDevice timeslots

ImQ009 — Thu, 02 Jul 2015 13:40:18 GMT

It seems to be done in a very similar way to what I did. Except for the fact that I didn't set the Gazell XOSC control to manual. That did nothing though. Although, when I removed the SD resources variant of Gazell and used the normal one the application started to receive data and send acks. Though as soon as that happens I get a HardFault. Not sure what's up with that :/ I also get a ton of NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO signals

RE: Gazell not functioning inside SoftDevice timeslots

ImQ009 — Thu, 02 Jul 2015 12:36:53 GMT

I keep transmitting on a single channel, so that won't be a problem. Thanks! I'll take a look

RE: Gazell not functioning inside SoftDevice timeslots

Hung Bui — Thu, 02 Jul 2015 12:35:41 GMT

@ImQ009: I don't have an example for gazell host, with timeslot, but I have one for gazel device. It's based on SDK v6.1.

I think you can first test if it works in device mode then try to convert the example to host mode.

But keep in mind that since the host is running in timslot, so most likely the timer won't be synced and then you would need to keep all the connection in out of sync mode. This will result a slower data throught put due to retransmission.

HRS Gazell device multi protocol.zip