NRF52 problem with "Traced" pins and "Uart"

RE: NRF52 problem with "Traced" pins and "Uart"

J.A — Thu, 21 Oct 2021 10:49:40 GMT

Hi PK.

I´m testing it, at this moment it´s all ok and works. If in a few days all is ok, I tell you and I verify the answer.

RE: NRF52 problem with "Traced" pins and "Uart"

Priyanka — Tue, 19 Oct 2021 08:26:52 GMT

Hi,

In most sample projects, TRACE pins are configured as normal GPIO pins so you can configure them as you configure any regular GPIO pin. As for the error, kindly try referring to this thread and let me know how it goes.

Hope this helps!

Regards,

RE: NRF52 problem with "Traced" pins

J.A — Mon, 18 Oct 2021 08:28:37 GMT

Is a custom board, not the DK board.

RE: NRF52 problem with "Traced" pins

Priyanka — Thu, 30 Sep 2021 11:33:12 GMT

Hi,

Are you using an nRF52 DK? If so, the P0.16 is configured as a button and P0.17 is not a 'Trace' pin and is connected to an LED. Kindly verify.

Regards,

Priyanka