Sample project creation issue

RE: Sample project creation issue

Sigurd Hellesvik — Thu, 28 Oct 2021 13:57:35 GMT

I answered two in a row here, so dont miss the other answer.

If the last suggestion still does not resolve the issue, the following two logs will be helpful:

Enable Degub C++ logging, and paste any output from the Output tab here.

Press F1, and run "nRF Connect: Generate Support Information", and paste any output from the Output tab here.

Regards,
Sigurd Hellesvik

RE: Sample project creation issue

Sigurd Hellesvik — Thu, 28 Oct 2021 13:44:44 GMT

You should not need to make any change to the settings for this to work.

After I load and build the application, The things you linked look like this in my versio (I did not change any settings manually):

Do you experience the same if you "open an existing application"?
Try zephyr/samples/hello_world.

Regards,
Sigurd Hellesvik

RE: Sample project creation issue

hiteshk014 — Thu, 28 Oct 2021 12:39:08 GMT

Hi Enukic & Sigurd,

As suggested in previous reply I reinstalled the VScode & all extension and also verified all modifications suggested in previous replies but it is showing me the error

can you please help

RE: Sample project creation issue

Sigurd Hellesvik — Wed, 20 Oct 2021 12:52:39 GMT

Hi Hitesh

If you got these issues after trying the fixes from previous comments, I suggest you undo these configuration changes.

Then we can find another solution for your first problems.

Lets have a look at the error messages from the top of this post:

[quote user=""]

cannot open source file "zephyr.h"

cannot open source file "sys/printk.h"

[/quote]

I also had these problems.
Then I reinstalled Visual Studio(VS) Code and the nRF Connect extension for VS Code. This fixed the includePath issue for me.
To uninstall the VS Code , delete the relevant folders in "C:\Users\USERNAME\.vscode\extensions".

Is it possible for you to reinstall VS Code?
If not, try to only delete extensions.

[quote user=""]CONFIG_OPENOCD_SUPPORT is deprecated[/quote]

If you still have this problem after the reinstall, we will see if we find a solution for this.

I'm sorry if this is a bit backwards, but sometimes a fresh start is the easiest way to fix an issue.

Regards,
Sigurd Hellesvik

RE: Sample project creation issue

hiteshk014 — Wed, 20 Oct 2021 12:43:04 GMT

Hi,

I'm having an issue,
not able to locate files of sample application added in workspace after modifying as mentioned in above suggestions,

can see sample application chat and hello world in application section, but not able to see project files below V1.7.0 as attached in the images below,

RE: Sample project creation issue

enukic — Tue, 19 Oct 2021 15:49:20 GMT

I don't think this is a problem. I saw this appear in the Nordic's youtube nRF Connect SDK Tutorial as well.

RE: Sample project creation issue

hiteshk014 — Tue, 19 Oct 2021 15:37:37 GMT

Hi enukic,

Thank you for quick response,

majority of issues are cleared one last thing which is pending is ,

"message": "CONFIG_OPENOCD_SUPPORT is deprecated"

can you please help in resolving this?

RE: Sample project creation issue

enukic — Tue, 19 Oct 2021 13:26:27 GMT

Did you also set the Intelli Sense Mode to windows-gcc-arm?

I also suggest you do CTRL+Shift+P and then type "Reload Window" and hit enter. This may also do the trick.

RE: Sample project creation issue

hiteshk014 — Tue, 19 Oct 2021 12:47:44 GMT

Hi,

Please find attached screenshots I have modified as mentioned in by Sigurd, its not getting reslved, still same issue persist

RE: Sample project creation issue

enukic — Tue, 19 Oct 2021 08:45:39 GMT

Hi,

please take a look at this thread again. Sigurd explained something about include path that may fix the problem:

devzone.nordicsemi.com/.../problems-with-vs-code

RE: Sample project creation issue

hiteshk014 — Tue, 19 Oct 2021 08:12:48 GMT

Hi,

I'm not able to open the link, access denied, can you please help in providing the proper solution in building the sample application creation from nCS 1.7.0

Thank you,

RE: Sample project creation issue

hiteshk014 — Mon, 18 Oct 2021 14:06:25 GMT

hi,

As I could see in that thread solution is to enable Intelli Sense Mode: windows-gcc-arm

can you please help how to enable Intelli Sense Mode: windows-gcc-arm in vscode

RE: Sample project creation issue

enukic — Mon, 18 Oct 2021 11:58:12 GMT

Please take a look at this thread, I wrote what solved same problem for me:

devzone.nordicsemi.com/.../problems-with-vs-code

RE: Sample project creation issue

hiteshk014 — Mon, 18 Oct 2021 10:07:23 GMT

RE: Sample project creation issue

hiteshk014 — Mon, 18 Oct 2021 09:41:56 GMT

Terminal Logs

devzone.nordicsemi.com/.../Terminal_5F00_logs.txt