Error: CMake Failed

RE: Error: CMake Failed

Priyanka — Fri, 22 Oct 2021 08:47:19 GMT

Hi,

Try deleting the following:

1. all build folders

2. CMakeFiles folder

3. Kconfig folder

4. CMakeCache text file

5. zephyr_modules text file

6. zephyr_setting text file

Then, within prj.conf, either remove CONFIG_LOG_IMMEDIATE=y or replace it with CONFIG_LOG_MODE_IMMEDIATE=y

Then try re-importing into SEGGER.

This worked for me and hope it does for you too and kindly let me know.

Regards,

RE: Error: CMake Failed

Rihab — Thu, 21 Oct 2021 13:59:27 GMT

devzone.nordicsemi.com/.../1212.bme280.zip

that's the project
infact it runs from the zephyr samples but i want to run it from my project
do you can help me please

RE: Error: CMake Failed

Priyanka — Thu, 21 Oct 2021 13:44:41 GMT

Do you get the same error when building the default bme280 sample provided by zephyr?

Also, would it be possible to share the bme280 folder from your projects as a zip file?

RE: Error: CMake Failed

Rihab — Thu, 21 Oct 2021 13:28:33 GMT

these are the files inside my project
and yes there's another project called Bme280 under the zephyr samples
it's the default sample package provided by zephyr

RE: Error: CMake Failed

Priyanka — Thu, 21 Oct 2021 13:18:22 GMT

I see that the location that you have is C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280. Could you share a picture of all the files within this folder?

Also, Do you have a bme280 folder in the location C:/Users/rzaafouri/ncs/v1.7.0/zephyr/samples/sensor/bme280 ?

RE: Error: CMake Failed

Rihab — Thu, 21 Oct 2021 12:23:24 GMT

i'm using nrf5340DK and i'm on Windows

RE: Error: CMake Failed

Priyanka — Thu, 21 Oct 2021 12:21:41 GMT

Hi,

Could you tell me whether you using an nRF5340 DK or nRF5340 PDK? Also, what OS are you running on Windows, Linux or Mac OS?

Regards,

RE: Error: CMake Failed

Rihab — Thu, 21 Oct 2021 09:59:14 GMT

C:\Users\rzaafouri\ncs\v1.7.0\Projects\bme280>west build -b nrf5340dk_nrf5340cpuapp
ERROR: it looks like . is a build directory: did you mean --build-dir . instead?
FATAL ERROR: refusing to proceed without --force due to above error

C:\Users\rzaafouri\ncs\v1.7.0\Projects\bme280>west build -b nrf5340dk_nrf5340cpuapp --force
-- west build: generating a build system
Including boilerplate (Zephyr base (cached)): C:/Users/rzaafouri/ncs/v1.7.0/zephyr/cmake/app/boilerplate.cmake
-- Application: C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280
-- Using NCS Toolchain 1.7.0 for building. (C:/Users/rzaafouri/ncs/v1.7.0/toolchain/cmake)
-- Zephyr version: 2.6.99 (C:/Users/rzaafouri/ncs/v1.7.0/zephyr), build: v2.6.99-ncs1
-- Found west (found suitable version "0.11.1", minimum required is "0.7.1")
-- Board: nrf5340dk_nrf5340_cpuapp
-- Cache files will be written to: C:/Users/rzaafouri/ncs/v1.7.0/zephyr/.cache
-- Found dtc: C:/Users/rzaafouri/ncs/v1.7.0/toolchain/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found toolchain: gnuarmemb (C:/Users/rzaafouri/ncs/v1.7.0/toolchain/opt)
-- Found BOARD.dts: C:/Users/rzaafouri/ncs/v1.7.0/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp.dts
-- Found devicetree overlay: C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280/nrf5340dk_nrf5340_cpuapp.overlay
-- Generated zephyr.dts: C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280/build/zephyr/zephyr.dts
-- Generated devicetree_unfixed.h: C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280/build/zephyr/include/generated/devicetree_unfixed.h
-- Generated device_extern.h: C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280/build/zephyr/include/generated/device_extern.h
-- Including generated dts.cmake file: C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280/build/zephyr/dts.cmake
Parsing C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280/Kconfig
C:/Users/rzaafouri/ncs/v1.7.0/zephyr/scripts/kconfig/kconfig.py: [Errno 13] Permission denied: 'C:/Users/rzaafouri/ncs/v1.7.0/Projects/bme280/Kconfig'
CMake Error at C:/Users/rzaafouri/ncs/v1.7.0/zephyr/cmake/kconfig.cmake:268 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  C:/Users/rzaafouri/ncs/v1.7.0/zephyr/cmake/app/boilerplate.cmake:554 (include)
  C:/Users/rzaafouri/ncs/v1.7.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:24 (include)
  C:/Users/rzaafouri/ncs/v1.7.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:40 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!
FATAL ERROR: command exited with status 1: 'C:\Users\rzaafouri\ncs\v1.7.0\toolchain\opt\bin\cmake.EXE' '-DWEST_PYTHON=C:\Users\rzaafouri\ncs\v1.7.0\toolchain\opt\bin\python.exe' '-BC:\Users\rzaafouri\ncs\v1.7.0\Projects\bme280\build' '-SC:\Users\rzaafouri\ncs\v1.7.0\Projects\bme280' -GNinja

i'm trying to run it through the command prompt and this is the output i get everytime
can you help please