Mesh disconnect

RE: Mesh disconnect

Mttrinh — Wed, 10 Nov 2021 08:45:33 GMT

Hi,

This seems be expected behaviour. The Mesh Provisioning Service is expecting to be used for provisioning the node. Enabling notifications triggers the initiation of the provisioning link, which then starts a link timeout. This is reset each time a provisioning PDU is sent over the link, otherwise times out after NRF_MESH_PROV_LINK_TIMEOUT_MIN_US. When this times out, the connection is disconnected from the device side, assuming the provisioning process has stalled. So this is all by design, and should pose no problems for the intended and supported use case of the Mesh Provisioning Service, namely provisioning the node.

RE: Mesh disconnect

Blastka — Fri, 29 Oct 2021 06:12:18 GMT

There are no problems with this application. I do not understand the problem in the nrf connect with a notify. The notify is the same in both apps, so what's the problem?

RE: Mesh disconnect

Mttrinh — Thu, 28 Oct 2021 13:07:30 GMT

Can you provide more details on what you are trying to do?

[quote user="Blastka"]I use nRF Mesh app also.[/quote]

Are you able to do what you want with the nRF Mesh app? Any issues there?

RE: Mesh disconnect

Blastka — Thu, 28 Oct 2021 12:58:32 GMT

I use nRF Mesh app also. But i don't trying to provision the node.

RE: Mesh disconnect

Mttrinh — Thu, 28 Oct 2021 12:41:50 GMT

Hi,

If you are trying to provision the node(Light switch) then I will suggest you use our nRF Mesh app.