NFC BLE pairing issues

RE: NFC BLE pairing issues

Simonr — Wed, 08 Dec 2021 13:56:38 GMT

Yes, it's a good idea to make a specific app on the phone side that know how and what it wants to connect/pair to a device. The nRFConnect app specifically is not open-source I'm afraid, but the Android BLE library it is built on is open source, and available here.

Best regards,

Simon

PS: Since you have "verified" my answer, I don't get notifications on updates on this case as it is considered "resolved", so it was a coincidence that I saw your follow-up question.

RE: NFC BLE pairing issues

Yuank — Tue, 07 Dec 2021 17:31:52 GMT

Thanks a lot!

About Q6 and the second half of Q4, I mean some (I guess most) smartphones(I tried with HuaweiP30, iPhone12 and one model of Samsung) cannot directly connect to the nRF. After pairing, nRF will show in the Paired Devices list but not connected, if you click to connect it will say something like 'This device needs its app to connect'. So if I wanna build an app like nRF Connect to connect the board, I need to implement the process between 'after pairing' and 'connected', right?

RE: NFC BLE pairing issues

Simonr — Tue, 07 Dec 2021 10:54:59 GMT

1. Correct.

2. Correct.

3. Yes, on some phones it's called paired devices rather than bonded devices once bonded.

4. Depending on the phone you have, the Bluetooth settings can connect over NFC pairing as well I think. Or that you can be prompted to do use the "regular" Bluetooth settings in some phones.

5. Correct. Same goes if the bonding information is removed from the nRF device and not the phone. Then the phone won't be able to connect because it thinks it is bonded already.

6. I'm not sure I understand what you're asking here. It's not restricted to connect to a smartphone, as you could make a device of your own with an NFC reader and a BLE device that is able to connect and pair to this device.

Best regards,

Simon