USB MSC Zephyr example using SD card issue

RE: USB MSC Zephyr example using SD card issue

dejans — Wed, 29 Dec 2021 14:57:35 GMT

Hi Kevin,

For more information on configuration system refer to developer.nordicsemi.com/.../index.html

Available configuration options can be found here developer.nordicsemi.com/.../index-all.html

Best regards,

Dejan

RE: USB MSC Zephyr example using SD card issue

pigno5e — Wed, 29 Dec 2021 14:48:29 GMT

Thanks a lot, Dejan. It's very helpful. I will have a look at these documents.

Kind regards, Kevin

RE: USB MSC Zephyr example using SD card issue

dejans — Wed, 29 Dec 2021 13:58:42 GMT

Hi Kevin,

Information about nRF5 SDK and nRF Connect SDK is available here:

devzone.nordicsemi.com/.../nrf-connect-sdk-and-nrf5-sdk-statement

These links could also be helpful:

devzone.nordicsemi.com/.../can-we-use-zephyr-os-with-nordic-sdk
devzone.nordicsemi.com/.../which-ide-should-we-use-for-development-with-nrf5-sdk-12-2-0

Supported toolchains in nRF5 SDK are listed on www.nordicsemi.com/.../nrf5-sdk

IDEs for nRF Connect SDK are shown on www.nordicsemi.com/.../nRF-Connect-SDK

Best regards,

Dejan

RE: USB MSC Zephyr example using SD card issue

pigno5e — Wed, 29 Dec 2021 12:34:33 GMT

Hi Dejans,

Thanks a lot for your reply.

Here is the link directing to one of the video tutorials I've mentioned.

https://www.youtube.com/watch?v=2cv_jjqk5hg

So what's the relationship between nRF5 SDK and nRF Connect SDK? Are there any connections between them or they are completely different and separate SDKs?

If I am using Zephyr and VSCode, can I use both SDKs or the nRF Connect SDK only? Additionally, if I want to use nRF5 SDK, does it mean I have to change to another IDE, Keil, for example?

Thanks a lot for your help and explanation.

Kind regards, Kevin

RE: USB MSC Zephyr example using SD card issue

dejans — Wed, 29 Dec 2021 12:06:27 GMT

Hi Kevin,

Could you specify an exact application folder (inside the samples folder) which you are using for testing?

Could you also provide a link to the video tutorial?

I see that you are using Zephyr and Visual Studio Code. However, you provided a link to the infocenter page to nRF5 SDK. Could you please specify if you are using nRF5 SDK or nRF Connect SDK?

Best regards,

Dejan

RE: USB MSC Zephyr example using SD card issue

pigno5e — Wed, 29 Dec 2021 11:44:28 GMT

Dear ,

I would like to add a few updates in regard to the issue I posted earlier.

In fact, it's working now and it turns out a hardware issue rather than software. When connecting to windows or mac, a disk drive with the size of the SDHC card appears.

However, I still wish to have a bit more knowledge about the sdk and the examples provided.

In the examples shown in the infocenter, most of them are instructed as adding certain macro definitions to active or deactivate certain features. But how could I correlate these macro definitions to the CONFIG_XXX=y format which are commonly used in the proj.conf file?

For certain peripherals or functions, how could I see a completed list of options for CONFIG_XXX that I could use to configure the device? Is there any place I can find any documentation?

Thanks and regards, Kevin