unable to provision with INSTABURST enabled

RE: unable to provision with INSTABURST enabled

Mttrinh — Fri, 21 Jan 2022 19:01:43 GMT

Hi,

We did manage to reproduce the issue on an Android phone over here. Taking another look at the screenshots you have provided it seems like both the device and the phone is provisioned successfully. It looks like it is failing for the configuration message, the network transmit.

Ideally it should not happen but it can happen that the configuration message can fail, which mean that you just have to do it manually.

You could try to provision and if your not getting a response and it hangs then exit provision screen and configure this manually after going in to node. What I mean by that is after provisioning is completed and it hangs, exit the screen and reconnect manually then go into the node and try setting a network transmit in the configuration server model.

RE: unable to provision with INSTABURST enabled

Ashishsult — Fri, 14 Jan 2022 18:23:49 GMT

Hi,

Here is the complete folder.

devzone.nordicsemi.com/.../nrf5sdkformeshv500src.7z

RE: unable to provision with INSTABURST enabled

Mttrinh — Fri, 14 Jan 2022 15:38:06 GMT

Hi,

Can you give me your whole project? I can't seem to build the project.

RE: unable to provision with INSTABURST enabled

Ashishsult — Fri, 14 Jan 2022 12:18:53 GMT

Hi Mttrinh,

Here is the attached light_switch example with instaburst enabled.

devzone.nordicsemi.com/.../client.zip

RE: unable to provision with INSTABURST enabled

Mttrinh — Fri, 14 Jan 2022 11:41:08 GMT

Is it possible to upload your project so I can try to reproduce it over here?

RE: unable to provision with INSTABURST enabled

Ashishsult — Thu, 13 Jan 2022 13:39:36 GMT

Yes, both the phones stop at the same place. Also, yes when I disable the instaburst, both the phones are able to provision the device.

RE: unable to provision with INSTABURST enabled

Mttrinh — Thu, 13 Jan 2022 13:35:08 GMT

And the phone is stopping on the same place on both phones? Are you able to provision the device if instaburst is disabled with both phones?

RE: unable to provision with INSTABURST enabled

Ashishsult — Wed, 12 Jan 2022 16:26:26 GMT

I have use Oneplus Nord2 and Samsung Galaxy A31 with App version 3.1.6.

As per the documentation, Instaburst feature is only enabled for nrf52832 (PCA10040), and that is why I an using that.

RE: unable to provision with INSTABURST enabled

Mttrinh — Wed, 12 Jan 2022 16:17:19 GMT

Does not look like you get any asserts on the device side. Have you tried provisioning with another phone? What version of nRF Mesh app are you using?

Can you also tell me what device you are using? A custom board or a DK?

RE: unable to provision with INSTABURST enabled

Ashishsult — Wed, 12 Jan 2022 15:58:55 GMT

I expect this at the provisioner side.

RE: unable to provision with INSTABURST enabled

Ashishsult — Wed, 12 Jan 2022 15:38:24 GMT

It is BLE Mesh v5.0.0 along with nRF5_SDK_17.0.2_d674dde.

There is no error code I have but the provisioning is halted after this log "Sending network transmit set".

RE: unable to provision with INSTABURST enabled

Mttrinh — Wed, 12 Jan 2022 15:24:34 GMT

Do you get any error codes? From you log, it looks like the device is provisioned succesfully: "Succesfully provisioned".

Which Mesh SDK version are you using?

RE: unable to provision with INSTABURST enabled

Ashishsult — Wed, 12 Jan 2022 14:11:57 GMT

No, I only enable the macro EXPERIMENTAL_INSTABURST_ENABLED, which enables the project by adding few files in Bearer and added core_tx_instaburst.c in Core (without core_tx_adv.c).

RE: unable to provision with INSTABURST enabled

Mttrinh — Wed, 12 Jan 2022 14:07:38 GMT

Hi,

Have you made any other changes to the example other than enable the instaburst feature?

Did you check out Nordic Advertiser Extensions (Instaburst) documentation?