INA219 Sensor wrong data display

RE: INA219 Sensor wrong data display

Øivind — Mon, 14 Feb 2022 15:08:58 GMT

Try connecting the sensor to VDD, and not VDD_nrf. You can find VDD next to the power switch.

RE: INA219 Sensor wrong data display

Rihab — Mon, 14 Feb 2022 13:58:58 GMT

Hello Again
I finally managed to get an output through the INA219 sensor
and i got it on the terminal of SES
i came back to my initial problem
the main problem for which i created the ticket
the sensor is indicating mostly strange values and it's frequently repetitive
i will put you a screenshot below
i just want to fix this problem to get reasonable values
but i don't know what to try exactly to make it get the right values
can you help please with it

RE: INA219 Sensor wrong data display

Rihab — Mon, 14 Feb 2022 13:50:01 GMT

Hello Øivind
I managed to get output on the SES terminal
and it says that the device is not ready

i will put also my overlay file below

&i2c1 {
	status = "okay";
	sda-pin = < 34 >;
	scl-pin = < 35 >;
    clock-frequency = <100000>; 
	
	ina219: ina219@40 {
        status = "okay";
		compatible = "ti,ina219";
		reg = <0x40>;
		label = "INA219";
		brng = <0>;
		pg = <0>;
		sadc = <13>;
		badc = <13>;
		shunt-milliohm = <100>;
		lsb-microamp = <10>;
	};
};

&uart1 {
    status = "disabled";
};

is it an I²C problem like in V1.7.0
the user needs to change I²C to make it work ? or what may be causing this problem ?
can you help me find out please ?

RE: INA219 Sensor wrong data display

Øivind — Mon, 14 Feb 2022 11:05:37 GMT

The link I sent explains how to set up PuTTY.

Set up the settings for Serial connections:

Set up the settings for the terminal:

Then select Serial for the session, and save your settings, then open the terminal:

RE: INA219 Sensor wrong data display

Rihab — Fri, 11 Feb 2022 16:05:42 GMT

when i was on the V1.7.0 i used to visualize data on the terminal of SES.
infact the snipped output photo was from there ( but the data wasn't correctly displayed).
but for now i just downloaded Putty to be able to visualize data.
but i'm not really familiar with it.
can you give helpful links please to be able to use it and visualize data through it.
and how can i link it to SES built ?

RE: INA219 Sensor wrong data display

Øivind — Fri, 11 Feb 2022 15:16:57 GMT

Ok, just tested it myself. You can undo the changes to the prj.conf I suggested in my last reply.

What terminal are you using? The one in SES only works for RTT as far as I know, you want something like PuTTY

https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/gs_testing.html

I get output on the COM port when I test the sample.

RE: INA219 Sensor wrong data display

Rihab — Fri, 11 Feb 2022 15:00:57 GMT

i deleted the build file between the two changes
to eliminate the probability of error

i even added some logs before and after this part

	if (!device_is_ready(ina)) {
		printf("Device %s is not ready.\n", ina->name);
		return;
	}

but none of these logs was displayed

RE: INA219 Sensor wrong data display

Rihab — Fri, 11 Feb 2022 14:44:25 GMT

i tried removing CONFIG_STDOUT_CONSOLE=y from prj.conf
it didn't fix the problem
i replaced CONFIG_CBPRINTF_FP_SUPPORT=y with CONFIG_NEWLIB_LIBC_FLOAT_PRINTF=y with CONFIG_STDOUT_CONSOLE=y being removed
it didn't work neither
there's no output message on the the terminal emulator

RE: INA219 Sensor wrong data display

Øivind — Fri, 11 Feb 2022 14:18:26 GMT

Try removing CONFIG_STDOUT_CONSOLE=y from prj.conf.

If that doesn't fix it replace CONFIG_CBPRINTF_FP_SUPPORT=y with CONFIG_NEWLIB_LIBC_FLOAT_PRINTF=y.

RE: INA219 Sensor wrong data display

Rihab — Fri, 11 Feb 2022 13:35:01 GMT

yeah i did it
i removed and gave it the time to install correctly
i deleted the build folder
i figured out that i didn't add the DK on the plateform_allow in the sample.yaml
now after i added nrf5340dk_nrf5340cpuapp it works properly and it builds properly

sample:
  name: TI INA219 power/current monitor
  description: Demonstration of the INA219 I2C power/current monitor
tests:
  sample.drivers.ina219:
    build_only: true
    platform_allow: nrf5340dk_nrf5340cpuapp blackpill_f411ce
    tags: sensors

but when i try to debug it i have no output on the Terminal emulator
is there another trick to do to get the sensor data displayed please ?
do i need to activate something on the sensor ?

Kindly,
Many thanks

RE: INA219 Sensor wrong data display

Øivind — Fri, 11 Feb 2022 13:26:03 GMT

It's could be a problem in the build folder, if you haven't deleted it in a while, so you can try deleting it and rebuilding.

Did you reinstall the v1.8.0 SDK? If you did not, you can try that if deleting the build folder does not work. And like I said in my previous comment, make sure that it is completely finished installing before clicking any buttons.
By reinstalling I mean removing it and then reinstalling:

RE: INA219 Sensor wrong data display

Rihab — Fri, 11 Feb 2022 13:09:18 GMT

Hello again,
i followed the instructions you gave to me
i uninstalled the toolchain Manager and i reinstalled it.
this time i no longer have the window which pops up when i try to open the overlay file.
but the error message on the psa_crypto_slot_management.c persists

Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-mkdir’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-mkdir’
1> 'modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-mkdir' is up to date
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-download’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-download’
1> 'modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-download' is up to date
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-update’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-update’
1> 'modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-update' is up to date
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-patch’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-patch’
1> 'modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-patch' is up to date
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-configure’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-configure’
1> 'modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-configure' is up to date
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-build’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-build’
1> modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-build does not exist.
1> Combining ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-build’
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe --build . --
1> [1/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/aesni.c.obj
1> [2/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/arc4.c.obj
1> [3/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/aria.c.obj
1> [4/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/camellia.c.obj
1> [5/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/blowfish.c.obj
1> [6/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/debug.c.obj
1> [7/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/cipher_wrap.c.obj
1> [8/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/base64.c.obj
1> [9/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/asn1parse.c.obj
1> [10/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/des.c.obj
1> [11/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/asn1write.c.obj
1> [12/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/ctr_drbg.c.obj
1> [13/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/havege.c.obj
1> [14/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d72279290683467189ff29b11581dd36/library/entropy_poll.c.obj
1> [15/215] Generating objects/cc3xx.mon
1> [16/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/md5.c.obj
1> [17/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/md2.c.obj
1> [18/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/error.c.obj
1> [19/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/gcm.c.obj
1> [20/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/entropy.c.obj
1> [21/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/md4.c.obj
1> [22/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/pk_wrap.c.obj
1> [23/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/cipher.c.obj
1> [24/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/hkdf.c.obj
1> [25/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/nist_kw.c.obj
1> [26/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/pk.c.obj
1> [27/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/padlock.c.obj
1> [28/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/pkcs12.c.obj
1> [29/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/hmac_drbg.c.obj
1> [30/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/pkparse.c.obj
1> [31/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d72279290683467189ff29b11581dd36/library/platform_util.c.obj
1> [32/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/md.c.obj
1> [33/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/pkwrite.c.obj
1> [34/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/timing.c.obj
1> [35/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/pkcs5.c.obj
1> [36/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/ripemd160.c.obj
1> [37/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/platform.c.obj
1> [38/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/xtea.c.obj
1> [39/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/oid.c.obj
1> [40/215] Generating misc/generated/syscalls.json, misc/generated/struct_tags.json
1> [41/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d85dbc57772358a87a5af58114fbe078/psa_crypto_client.c.obj
1> [42/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/version.c.obj
1> [43/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto.c.obj
1> [44/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d72279290683467189ff29b11581dd36/library/version_features.c.obj
1> [45/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c.obj
1> FAILED: modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c.obj 
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\arm-none-eabi-gcc.exe -DMBEDTLS_CONFIG_FILE=\"nrf-config.h\" -DPSA_CRYPTO_SECURE -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/include -Izephyr/include/generated -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/soc/arm/nordic_nrf/nrf53 -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/lib/libc/minimal/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrf/include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/cmsis/CMSIS/Core/Include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx/mdk -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/modules/hal_nordic/nrfx/. -Ic:/users/rzaafouri/ncs/v1.8.0/toolchain/opt/bin/../lib/gcc/arm-none-eabi/9.2.1/include -Ic:/users/rzaafouri/ncs/v1.8.0/toolchain/opt/bin/../lib/gcc/arm-none-eabi/9.2.1/include-fixed -IC:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm/kernel/include -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/arch/arm/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/crypto/nrf_cc312_platform/include -Imodules/nrfxlib/nrfxlib/nrf_security/include/mbedtls_generated/mbedtls -Imodules/nrfxlib/nrfxlib/nrf_security/include/mbedtls_generated -Imodules/nrfxlib/nrfxlib/nrf_security/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/nrf_security/include -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include/mbedtls -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include/psa -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/nrf_security/include/mbedcrypto_glue/mbedtls/threading -Os -imacros C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/spm/zephyr/include/generated/autoconf.h -ffreestanding -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfp16-format=ieee -imacros C:/Users/rzaafouri/ncs/v1.8.0/zephyr/include/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-main -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-address-of-packed-member -Wno-unused-but-set-variable -Werror=implicit-int -fno-asynchronous-unwind-tables -fno-pie -fno-pic -fno-strict-overflow -fno-reorder-functions -fno-defer-pop -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0=WEST_TOPDIR -ffunction-sections -fdata-sections -mcmse -std=c99 -nostdinc -MD -MT modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c.obj -MF modules\nrfxlib\nrfxlib\nrf_security\src\mbedtls\CMakeFiles\mbedcrypto_base_vanilla.dir\C_\Users\rzaafouri\ncs\v1.8.0\mbedtls\library\psa_crypto_slot_management.c.obj.d -o modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c.obj -c C:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c
1> C:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c:22: fatal error: opening dependency file modules\nrfxlib\nrfxlib\nrf_security\src\mbedtls\CMakeFiles\mbedcrypto_base_vanilla.dir\C_\Users\rzaafouri\ncs\v1.8.0\mbedtls\library\psa_crypto_slot_management.c.obj.d: No such file or directory
1>    22 | 
1>       | 
1> compilation terminated.
1> [46/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c.obj
1> FAILED: modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c.obj 
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\arm-none-eabi-gcc.exe -DMBEDTLS_CONFIG_FILE=\"nrf-config.h\" -DPSA_CRYPTO_SECURE -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/include -Izephyr/include/generated -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/soc/arm/nordic_nrf/nrf53 -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/lib/libc/minimal/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrf/include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/cmsis/CMSIS/Core/Include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx/mdk -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/modules/hal_nordic/nrfx/. -Ic:/users/rzaafouri/ncs/v1.8.0/toolchain/opt/bin/../lib/gcc/arm-none-eabi/9.2.1/include -Ic:/users/rzaafouri/ncs/v1.8.0/toolchain/opt/bin/../lib/gcc/arm-none-eabi/9.2.1/include-fixed -IC:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm/kernel/include -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/arch/arm/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/crypto/nrf_cc312_platform/include -Imodules/nrfxlib/nrfxlib/nrf_security/include/mbedtls_generated/mbedtls -Imodules/nrfxlib/nrfxlib/nrf_security/include/mbedtls_generated -Imodules/nrfxlib/nrfxlib/nrf_security/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/nrf_security/include -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include/mbedtls -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include/psa -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/nrf_security/include/mbedcrypto_glue/mbedtls/threading -Os -imacros C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/spm/zephyr/include/generated/autoconf.h -ffreestanding -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfp16-format=ieee -imacros C:/Users/rzaafouri/ncs/v1.8.0/zephyr/include/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-main -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-address-of-packed-member -Wno-unused-but-set-variable -Werror=implicit-int -fno-asynchronous-unwind-tables -fno-pie -fno-pic -fno-strict-overflow -fno-reorder-functions -fno-defer-pop -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0=WEST_TOPDIR -ffunction-sections -fdata-sections -mcmse -std=c99 -nostdinc -MD -MT modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c.obj -MF modules\nrfxlib\nrfxlib\nrf_security\src\mbedtls\CMakeFiles\mbedcrypto_base_vanilla.dir\C_\Users\rzaafouri\ncs\v1.8.0\mbedtls\library\psa_crypto_driver_wrappers.c.obj.d -o modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c.obj -c C:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c
1> C:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c:1067:1: fatal error: opening dependency file modules\nrfxlib\nrfxlib\nrf_security\src\mbedtls\CMakeFiles\mbedcrypto_base_vanilla.dir\C_\Users\rzaafouri\ncs\v1.8.0\mbedtls\library\psa_crypto_driver_wrappers.c.obj.d: No such file or directory
1>  1067 | }
1>       | ^
1> compilation terminated.
1> [47/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d85dbc57772358a87a5af58114fbe078/psa_crypto_storage.c.obj
1> [48/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d72279290683467189ff29b11581dd36/library/psa_crypto_rsa.c.obj
1> [49/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d72279290683467189ff29b11581dd36/library/psa_crypto_ecp.c.obj
1> [50/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/replacements/pem.c.obj
1> [51/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/shared/CMakeFiles/mbedcrypto_shared.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/sha512.c.obj
1> [52/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/bignum.c.obj
1> [53/215] Generating include/generated/syscall_dispatch.c, include/generated/syscall_list.h
1> [54/215] Generating include/generated/driver-validation.h
1> [55/215] Generating include/generated/kobj-types-enum.h, include/generated/otype-to-str.h, include/generated/otype-to-size.h
1> ninja: build stopped: subcommand failed.
Build failed

in your opinion what is causing this error ?
is it the update to the new version or it something related to the INA219 project ?

Kindly,
Many thanks

RE: INA219 Sensor wrong data display

Øivind — Fri, 11 Feb 2022 11:10:37 GMT

Try reinstalling the v1.8.0 SDK, and make sure that you do not click any of the buttons (for example "Open Segger ...") until it is completely finished. There was an issue with the buttons appearing before the install was completely finished, and clicking them stopped certain files from being downloaded. I thought it was fixed, but maybe you encountered it since you were using old versions.

RE: INA219 Sensor wrong data display

Rihab — Fri, 11 Feb 2022 10:43:04 GMT

Hello @Øivind
thank you for your reply
i tried the solution that you suggested
i updated the nrfConnect and i also updated the toolchain Manager and now it shows "Open Segger Embedded Studio"
i tried like earlier to import the project but i always have the same error window which pop up(i linked its photo earlier) when i try to open the overlay file.
So i did runned the CMake from the project section and then i tried to build the solution and here i have an error that appears

Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-mkdir’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-mkdir’
1> modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-mkdir does not exist.
1> Combining ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-mkdir’
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E make_directory C:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E make_directory C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/spm
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E make_directory C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E make_directory C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/tmp
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E make_directory C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E make_directory C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/src
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E make_directory C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E touch C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-mkdir
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-download’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-download’
1> modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-download does not exist.
1> Combining ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-download’
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E echo_append
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E touch C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-download
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-update’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-update’
1> modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-update does not exist.
1> Combining ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-update’
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E echo_append
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E touch C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-update
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-patch’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-patch’
1> modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-patch does not exist.
1> Combining ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-patch’
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E echo_append
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E touch C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-patch
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-configure’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-configure’
1> modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-configure does not exist.
1> Combining ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-configure’
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E echo_append
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe -E touch C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-configure
Building ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-build’ from solution ‘build’ in configuration ‘Common’
1> Checking ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-build’
1> modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-build does not exist.
1> Combining ‘modules/nrf/samples/spm_subimage-prefix/src/spm_subimage-stamp/spm_subimage-build’
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\cmake.exe --build . --
1> [1/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c.obj
1> FAILED: modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c.obj 
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\arm-none-eabi-gcc.exe -DMBEDTLS_CONFIG_FILE=\"nrf-config.h\" -DPSA_CRYPTO_SECURE -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/include -Izephyr/include/generated -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/soc/arm/nordic_nrf/nrf53 -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/lib/libc/minimal/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrf/include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/cmsis/CMSIS/Core/Include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx/mdk -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/modules/hal_nordic/nrfx/. -Ic:/users/rzaafouri/ncs/v1.8.0/toolchain/opt/bin/../lib/gcc/arm-none-eabi/9.2.1/include -Ic:/users/rzaafouri/ncs/v1.8.0/toolchain/opt/bin/../lib/gcc/arm-none-eabi/9.2.1/include-fixed -IC:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm/kernel/include -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/arch/arm/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/crypto/nrf_cc312_platform/include -Imodules/nrfxlib/nrfxlib/nrf_security/include/mbedtls_generated/mbedtls -Imodules/nrfxlib/nrfxlib/nrf_security/include/mbedtls_generated -Imodules/nrfxlib/nrfxlib/nrf_security/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/nrf_security/include -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include/mbedtls -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include/psa -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/nrf_security/include/mbedcrypto_glue/mbedtls/threading -Os -imacros C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/spm/zephyr/include/generated/autoconf.h -ffreestanding -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfp16-format=ieee -imacros C:/Users/rzaafouri/ncs/v1.8.0/zephyr/include/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-main -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-address-of-packed-member -Wno-unused-but-set-variable -Werror=implicit-int -fno-asynchronous-unwind-tables -fno-pie -fno-pic -fno-strict-overflow -fno-reorder-functions -fno-defer-pop -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0=WEST_TOPDIR -ffunction-sections -fdata-sections -mcmse -std=c99 -nostdinc -MD -MT modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c.obj -MF modules\nrfxlib\nrfxlib\nrf_security\src\mbedtls\CMakeFiles\mbedcrypto_base_vanilla.dir\C_\Users\rzaafouri\ncs\v1.8.0\mbedtls\library\psa_crypto_slot_management.c.obj.d -o modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c.obj -c C:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c
1> C:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_slot_management.c:22: fatal error: opening dependency file modules\nrfxlib\nrfxlib\nrf_security\src\mbedtls\CMakeFiles\mbedcrypto_base_vanilla.dir\C_\Users\rzaafouri\ncs\v1.8.0\mbedtls\library\psa_crypto_slot_management.c.obj.d: No such file or directory
1>    22 | 
1>       | 
1> compilation terminated.
1> [2/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto.c.obj
1> [3/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/xtea.c.obj
1> [4/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/aesni.c.obj
1> [5/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/arc4.c.obj
1> [6/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/aria.c.obj
1> [7/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d72279290683467189ff29b11581dd36/library/version_features.c.obj
1> [8/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/d85dbc57772358a87a5af58114fbe078/psa_crypto_client.c.obj
1> [9/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/base64.c.obj
1> [10/215] Generating objects/cc3xx.mon
1> [11/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c.obj
1> FAILED: modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c.obj 
1> C:\Users\rzaafouri\ncs\v1.8.0\toolchain\opt\bin\arm-none-eabi-gcc.exe -DMBEDTLS_CONFIG_FILE=\"nrf-config.h\" -DPSA_CRYPTO_SECURE -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/include -Izephyr/include/generated -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/soc/arm/nordic_nrf/nrf53 -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/lib/libc/minimal/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrf/include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/cmsis/CMSIS/Core/Include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx/drivers/include -IC:/Users/rzaafouri/ncs/v1.8.0/modules/hal/nordic/nrfx/mdk -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/modules/hal_nordic/nrfx/. -Ic:/users/rzaafouri/ncs/v1.8.0/toolchain/opt/bin/../lib/gcc/arm-none-eabi/9.2.1/include -Ic:/users/rzaafouri/ncs/v1.8.0/toolchain/opt/bin/../lib/gcc/arm-none-eabi/9.2.1/include-fixed -IC:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm/kernel/include -IC:/Users/rzaafouri/ncs/v1.8.0/zephyr/arch/arm/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/crypto/nrf_cc312_platform/include -Imodules/nrfxlib/nrfxlib/nrf_security/include/mbedtls_generated/mbedtls -Imodules/nrfxlib/nrfxlib/nrf_security/include/mbedtls_generated -Imodules/nrfxlib/nrfxlib/nrf_security/include -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/nrf_security/include -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include/mbedtls -IC:/Users/rzaafouri/ncs/v1.8.0/mbedtls/include/psa -IC:/Users/rzaafouri/ncs/v1.8.0/nrfxlib/nrf_security/include/mbedcrypto_glue/mbedtls/threading -Os -imacros C:/Users/rzaafouri/ncs/v1.8.0/zephyr/samples/sensor/ina219/build_nrf5340dk_nrf5340_cpuapp_ns/spm/zephyr/include/generated/autoconf.h -ffreestanding -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfp16-format=ieee -imacros C:/Users/rzaafouri/ncs/v1.8.0/zephyr/include/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-main -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-address-of-packed-member -Wno-unused-but-set-variable -Werror=implicit-int -fno-asynchronous-unwind-tables -fno-pie -fno-pic -fno-strict-overflow -fno-reorder-functions -fno-defer-pop -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0/nrf/samples/spm=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/Users/rzaafouri/ncs/v1.8.0=WEST_TOPDIR -ffunction-sections -fdata-sections -mcmse -std=c99 -nostdinc -MD -MT modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c.obj -MF modules\nrfxlib\nrfxlib\nrf_security\src\mbedtls\CMakeFiles\mbedcrypto_base_vanilla.dir\C_\Users\rzaafouri\ncs\v1.8.0\mbedtls\library\psa_crypto_driver_wrappers.c.obj.d -o modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c.obj -c C:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c
1> C:/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/psa_crypto_driver_wrappers.c:1067:1: fatal error: opening dependency file modules\nrfxlib\nrfxlib\nrf_security\src\mbedtls\CMakeFiles\mbedcrypto_base_vanilla.dir\C_\Users\rzaafouri\ncs\v1.8.0\mbedtls\library\psa_crypto_driver_wrappers.c.obj.d: No such file or directory
1>  1067 | }
1>       | ^
1> compilation terminated.
1> [12/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/asn1parse.c.obj
1> [13/215] Building C object modules/nrfxlib/nrfxlib/nrf_security/src/mbedtls/CMakeFiles/mbedcrypto_base_vanilla.dir/C_/Users/rzaafouri/ncs/v1.8.0/mbedtls/library/asn1write.c.obj
1> [14/215] Generating misc/generated/syscalls.json, misc/generated/struct_tags.json
1> ninja: build stopped: subcommand failed.
Build failed

Do you have an idea what might cause this and how can i fix please

Kindly,
Many thanks

RE: INA219 Sensor wrong data display

Øivind — Thu, 10 Feb 2022 16:41:09 GMT

Hm, strange. "Open IDE" makes me think you are using an old version of the nRF Connect for Desktop app, and maybe an old version of the Toolchain Manager. It should say "Open Segger Embedded Studio"

If you are using old versions, can you try updating them? You can update nRF Connect for Desktop in its settings, and you can update the Toolchain Manager from nRF Connect for Desktop.

RE: INA219 Sensor wrong data display

Rihab — Thu, 10 Feb 2022 16:16:27 GMT

i even tried both versions the non secure and the secure one but i always get the same error window

RE: INA219 Sensor wrong data display

Rihab — Thu, 10 Feb 2022 16:12:43 GMT

yeah i did open it from the SES
and i clicked on open ide button

RE: INA219 Sensor wrong data display

Øivind — Thu, 10 Feb 2022 16:02:51 GMT

Did you open SES using the button next to v1.8.0 in the Toolchain Manager?

RE: INA219 Sensor wrong data display

Rihab — Thu, 10 Feb 2022 15:47:41 GMT

Hello,
thank you for the suggestion
i did my overlay file and it looks like this

&i2c1 {
	status = "okay";
	sda-pin = < 34 >;
	scl-pin = < 35 >;
    clock-frequency = <100000>; 
	
	ina219@40 {
		status = "okay";
		compatible = "ti,ina219";
		reg = <0x40>;
		label = "INA219";
		brng = <0>;
		pg = <0>;
		sadc = <13>;
		badc = <13>;
		shunt-milliohm = <100>;
		lsb-microamp = <10>;
	};
};

&uart1 {
    status = "disabled";
};

but i'm not able to open the project

is there an issue in the overlay file ?

RE: INA219 Sensor wrong data display

Øivind — Thu, 10 Feb 2022 15:10:34 GMT

The new sample is zephyr/samples/sensor/ina219

I think if you add this to an overlay file and add it to the sample, it should work:

&i2c1 {

	ina219@40 {
		status = "okay";
		compatible = "ti,ina219";
		reg = <0x40>;
		label = "INA219";
		brng = <0>;
		pg = <0>;
		sadc = <13>;
		badc = <13>;
		shunt-milliohm = <100>;
		lsb-microamp = <10>;
	};
};

RE: INA219 Sensor wrong data display

Rihab — Thu, 10 Feb 2022 15:04:55 GMT

ok thanks for the suggestion
well i just finished downloading and searching but in fact under: ncs\v1.8.0\zephyr\samples\drivers\current_sensing
there's only the CMakeLists.txt
should i import the rest from the old version ?

RE: INA219 Sensor wrong data display

Øivind — Thu, 10 Feb 2022 14:52:33 GMT

It doesn't sound like it should pose much of an issue.

Those numbers aren't really helpful as most of it is the build folder.

You can make a new private ticket about upgrading your project to v1.8.0, and I can help you with that there.

Were you able to get the v1.8.0 version of the INA219 sample working? You probably need to add an overlay file with a "ti,ina219" node to get the driver working.

RE: INA219 Sensor wrong data display

Rihab — Thu, 10 Feb 2022 14:37:46 GMT

My project is about 4 assembled sensors that work when a button is pressed
the project recover data each 5s and then it stores it somewhere on the cloud
here's a snip from the project properties

do you think it's easy to migrate on the V1.8.0 or will it be complicated ?

RE: INA219 Sensor wrong data display

Øivind — Thu, 10 Feb 2022 14:31:07 GMT

How difficult it will be to port your other project to v1.8.0 entirely depends on how big it is, and how affected it is by the changes between the versions. If it's not too big, there shouldn't be much of an issue porting it.

RE: INA219 Sensor wrong data display

Rihab — Thu, 10 Feb 2022 14:02:17 GMT

this project depends from another project which is done with V1.7.0
i don't know if it will be very safe if upgrade ! what do you think
meanwhile i will try the version of INA219 on V1.8.0
can you tell me if it will be safe if i upgrade my second project to the version V1.8.0 please ?

Kindly
Many thanks