nRF Connect on VSCode unable to build applicatios

RE: nRF Connect on VSCode unable to build applicatios

andy — Fri, 06 May 2022 12:01:58 GMT

oh, it works fine now. when i input west update in the terminal.thanks.

RE: nRF Connect on VSCode unable to build applicatios

Marte Myrvold — Fri, 06 May 2022 08:59:59 GMT

Hi,

Have you tried refreshing applications?

Can you also try reloading VS Code? Open command palette and write Developer: Reload Window.

I cannot see any obvious issues from your support information. Are you experiencing both issues as in the original ticket, that the applications do not show up in the applications tab, and CMake error when building? If you get an error when building please copy the complete output with the error and upload it here using Insert > Code.

Best regards,

Marte

RE: nRF Connect on VSCode unable to build applicatios

andy — Fri, 06 May 2022 04:19:33 GMT

Hi, i have a same issue,this is my Support information blow, is there anything should be change

[10:46:23] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world --pristine --board nrf21540dk_nrf52840 -- -DNCS_TOOLCHAIN_VERSION:STRING="NONE" -DCONFIG_DEBUG_OPTIMIZATIONS=y -DCONFIG_DEBUG_THREAD_INFO=y -DBOARD_ROOT:STRING="e:/nodic/test/nrf_connect_sdk/radio_test"
[10:46:28] Failure (code 1).
[10:47:21] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world
[10:47:25] Failure (code 1).
[10:52:58] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world
[10:53:02] Failure (code 1).
[10:53:29] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world
[10:53:31] Failure (code 1).
[10:54:15] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world --pristine --board nrf21540dk_nrf52840 -- -DNCS_TOOLCHAIN_VERSION:STRING="NONE" -DBOARD_ROOT:STRING="e:/nodic/test/nrf_connect_sdk/radio_test" -DCONFIG_DEBUG_OPTIMIZATIONS:STRING="y" -DCONFIG_DEBUG_THREAD_INFO:STRING="y" -DCONF_FILE:STRING="e:/nodic/test/nrf_connect_sdk/hello_world/prj.conf"
[10:54:20] Failure (code 1).
[11:09:24] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world --pristine --board nrf21540dk_nrf52840 -- -DNCS_TOOLCHAIN_VERSION:STRING="NONE" -DBOARD_ROOT:STRING="e:/nodic/test/nrf_connect_sdk/radio_test" -DCONFIG_DEBUG_OPTIMIZATIONS:STRING="y" -DCONFIG_DEBUG_THREAD_INFO:STRING="y" -DCONF_FILE:STRING="e:/nodic/test/nrf_connect_sdk/hello_world/prj.conf"
[11:09:29] Failure (code 1).
[11:10:25] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world --pristine --board nrf21540dk_nrf52840 -- -DNCS_TOOLCHAIN_VERSION:STRING="NONE" -DBOARD_ROOT:STRING="e:/nodic/test/nrf_connect_sdk/radio_test" -DCONFIG_DEBUG_OPTIMIZATIONS:STRING="y" -DCONFIG_DEBUG_THREAD_INFO:STRING="y" -DCONF_FILE:STRING="e:/nodic/test/nrf_connect_sdk/hello_world/prj.conf"
[11:10:31] Failure (code 1).
[11:12:11] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world --pristine --board nrf21540dk_nrf52840 -- -DNCS_TOOLCHAIN_VERSION:STRING="NONE" -DBOARD_ROOT:STRING="e:/nodic/test/nrf_connect_sdk/radio_test" -DCONFIG_DEBUG_OPTIMIZATIONS:STRING="y" -DCONFIG_DEBUG_THREAD_INFO:STRING="y" -DCONF_FILE:STRING="e:/nodic/test/nrf_connect_sdk/hello_world/prj.conf"
[11:12:17] Failure (code 1).
IMPORTANT: The data below could contain sensitive or confidential information about your environment.
If you do not wish this to be seen by others, please make sure to remove it before sharing.

For help and support, visit the Nordic DevZone at https://devzone.nordicsemi.com/.

{
  "platform": {
    "os": "win32",
    "osVersion": "Windows 10 Enterprise LTSC 2019",
    "osKernel": "10.0.17763",
    "vscode": "1.66.2",
    "electron": "17.2.0",
    "node": "v16.13.0"
  },
  "system": {
    "date": "2022-05-06T03:23:10.957Z",
    "vscodeRoot": "d:\\Program Files\\Microsoft VS Code\\resources\\app",
    "nrfConnectForDesktopInstalled": true,
    "vscodeUptime": "00:39:01",
    "osUptime": "01:08:16",
    "cpu": {
      "model": "AMD Ryzen 7 4800U with Radeon Graphics",
      "speed": "1797 MHz",
      "count": 8
    },
    "memory": {
      "total": "15.37 GB",
      "free": "8.53 GB"
    }
  },
  "workspace": {
    "name": "无标题 (工作区)",
    "workspaceFile": "1651805048988",
    "folders": [
      "e:\\nodic\\test\\nrf_connect_sdk\\radio_test",
      "e:\\nodic\\test\\nrf_connect_sdk\\hello_world"
    ]
  },
  "extensions": {
    "internal": {
      "nordic-semiconductor.nrf-connect": {
        "version": "2022.4.219",
        "path": "c:\\Users\\lyh\\.vscode\\extensions\\nordic-semiconductor.nrf-connect-2022.4.219",
        "isActive": true
      },
      "nordic-semiconductor.nrf-terminal": {
        "version": "2022.4.61",
        "path": "c:\\Users\\lyh\\.vscode\\extensions\\nordic-semiconductor.nrf-terminal-2022.4.61",
        "isActive": true
      },
      "nordic-semiconductor.devicetree": null,
      "nordic-semiconductor.kconfig": null
    },
    "external": {
      "marus25.cortex-debug": "1.4.4",
      "ms-vscode.cpptools": "1.9.8",
      "ms-vscode-remote.remote-wsl-recommender": "0.0.15",
      "ms-vscode.js-debug": "1.66.1",
      "ms-vscode.js-debug-companion": "1.0.18",
      "ms-vscode.references-view": "0.0.89",
      "ms-vscode.vscode-js-profile-table": "1.0.0",
      "abusaidm.html-snippets": "0.2.1",
      "akamud.vscode-theme-onedark": "2.2.3",
      "AlexCoderCorp.comments": "1.0.5",
      "analytic-signal.preview-pdf": "1.0.0",
      "atomclip.windows-arm-none-eabi": "0.1.4",
      "batisteo.vscode-django": "1.10.0",
      "bukas.GBKtoUTF8": "0.0.2",
      "christian-kohler.path-intellisense": "2.8.0",
      "cl.keil-assistant": "1.7.0",
      "cschlosser.doxdocgen": "1.4.0",
      "danielpinto8zz6.c-cpp-compile-run": "1.0.15",
      "DavidAnson.vscode-markdownlint": "0.47.0",
      "dbaeumer.vscode-eslint": "2.2.2",
      "donjayamanne.jquerysnippets": "0.0.1",
      "donjayamanne.python-environment-manager": "1.0.4",
      "eamodio.gitlens": "12.0.6",
      "ecmel.vscode-html-css": "1.12.2",
      "formulahendry.auto-close-tag": "0.5.14",
      "formulahendry.auto-rename-tag": "0.1.10",
      "formulahendry.code-runner": "0.11.7",
      "formulahendry.terminal": "0.0.10",
      "GitHub.vscode-pull-request-github": "0.40.0",
      "Gruntfuggly.todo-tree": "0.0.215",
      "hancel.markdown-image": "1.1.20",
      "hbenl.vscode-test-explorer": "2.21.1",
      "hediet.vscode-drawio": "1.6.4",
      "hollowtree.vue-snippets": "1.0.4",
      "in4margaret.compareit": "0.0.2",
      "jeff-hykin.better-cpp-syntax": "1.15.13",
      "kevinglasson.cornflakes-linter": "0.5.1",
      "KevinRose.vsc-python-indent": "1.15.0",
      "magicstack.MagicPython": "1.1.0",
      "McCarter.start-git-bash": "1.2.1",
      "metalcode-eu.windows-arm-none-eabi": "0.1.6",
      "mhutchie.git-graph": "1.30.0",
      "michelemelluso.gitignore": "1.0.1",
      "mikey.vscode-fileheader": "0.0.2",
      "mkaufman.HTMLHint": "0.10.0",
      "MS-CEINTL.vscode-language-pack-zh-hans": "1.66.3",
      "ms-toolsai.jupyter": "2022.3.1000901801",
      "ms-toolsai.jupyter-keymap": "1.0.0",
      "ms-toolsai.jupyter-renderers": "1.0.6",
      "ms-vscode-remote.remote-containers": "0.234.0",
      "ms-vscode-remote.remote-ssh": "0.78.0",
      "ms-vscode-remote.remote-ssh-edit": "0.80.0",
      "ms-vscode-remote.remote-wsl": "0.66.2",
      "ms-vscode.cpptools-extension-pack": "1.1.0",
      "ms-vscode.cpptools-themes": "1.0.0",
      "ms-vscode.test-adapter-converter": "0.1.6",
      "ms-vsliveshare.vsliveshare": "1.0.5527",
      "ms-vsliveshare.vsliveshare-audio": "0.1.91",
      "msjsdiag.debugger-for-chrome": "4.13.0",
      "platformio.platformio-ide": "2.4.3",
      "Shan.code-settings-sync": "3.4.3",
      "shd101wyy.markdown-preview-enhanced": "0.6.2",
      "sidmishraw.topper": "1.5.0",
      "sidthesloth.html5-boilerplate": "1.1.1",
      "steoates.autoimport": "1.5.4",
      "streetsidesoftware.code-spell-checker": "2.1.11",
      "TabNine.tabnine-vscode": "3.5.45",
      "techer.open-in-browser": "2.0.0",
      "tintinweb.graphviz-interactive-preview": "0.2.1",
      "tintinweb.vscode-solidity-language": "0.0.6",
      "trond-snekvik.gnu-mapfiles": "1.1.0",
      "VisualStudioExptTeam.vscodeintellicode": "1.2.20",
      "vscode-icons-team.vscode-icons": "11.11.0",
      "wholroyd.jinja": "0.0.8",
      "wix.vscode-import-cost": "3.3.0",
      "wmaurer.change-case": "1.0.0",
      "xabikos.JavaScriptSnippets": "1.8.0",
      "yzhang.markdown-all-in-one": "3.4.3"
    }
  },
  "tools": {
    "D:\\Program Files\\SEGGER\\JLink_V756d\\JLink.exe": "7.56d",
    "C:\\Program Files (x86)\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\nrfjprog.exe": "10.14.0",
    "nrfutil": "Not found",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\cmake.exe": "3.20.5",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Scripts\\west.exe": "0.12.0",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\python.exe": "3.8.2",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\ninja.exe": "1.9.0",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\gperf.exe": "3.1",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\dtc.exe": "1.4.7",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\arm-none-eabi-gcc.exe": "9-2019-q4-major",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\gn.exe": "1977",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\mingw64\\bin\\git.exe": "2.26.2.windows.1"
  },
  "sdks": [
    {
      "version": "1.8.0",
      "path": "d:\\nordic\\ncs\\v1.8.0"
    },
    {
      "version": "1.9.1",
      "path": "d:\\nordic\\ncs\\v1.9.1"
    }
  ],
  "toolchains": [
    {
      "version": "1.8.0",
      "path": "d:\\nordic\\ncs\\v1.8.0\\toolchain"
    },
    {
      "version": "1.9.1",
      "path": "d:\\nordic\\ncs\\v1.9.1\\toolchain"
    }
  ],
  "connectedDevices": [
    {
      "serialNumber": "683449788"
    }
  ],
  "deviceProviders": [
    "nrfjprog"
  ],
  "config": {
    "nordic-semiconductor.nrf-connect": {
      "topdir": "${nrf-connect.sdk:1.9.1}",
      "toolchain": {
        "path": "${nrf-connect.toolchain:1.9.1}"
      },
      "ozonePath": "",
      "applications": [
        "${workspaceFolder}",
        "e:\\nodic\\test\\nrf_connect_sdk\\radio_test",
        "e:\\nodic\\test\\nrf_connect_sdk\\hello_world"
      ],
      "applicationOptions": {},
      "kconfig": {
        "interface": "kconfig"
      },
      "welcome": {
        "showOnStartup": false
      },
      "west": {
        "env": {
          "$base": "terminal"
        }
      },
      "boardRoots": [],
      "enableTelemetry": true
    },
    "nordic-semiconductor.nrf-terminal": {
      "terminalMode": "character"
    },
    "nordic-semiconductor.devicetree": {
      "modules": [
        "${zephyrBase}",
        "${zephyrBase}/../nrf",
        "."
      ],
      "zephyr": "",
      "ctxFile": "",
      "defaultBoard": ""
    },
    "nordic-semiconductor.kconfig": {
      "root": "",
      "env": {},
      "cfiles": true,
      "disable": false,
      "zephyr": {
        "base": ""
      },
      "python": "D:/nordic/ncs/v1.9.1/toolchain/opt/bin/python.exe",
      "liveValue": true
    },
    "marus25.cortex-debug": {
      "armToolchainPath": "D:/Program Files/GNU Arm Embedded Toolchain/10 2020-q4-major/bin",
      "armToolchainPrefix": "arm-none-eabi",
      "gdbPath": null,
      "objdumpPath": null,
      "JLinkGDBServerPath": "D:/Program Files/SEGGER/JLink_V756d/JLinkGDBServerCL.exe",
      "openocdPath": "D:/Program Files/openocd-0.10.0/bin",
      "pyocdPath": null,
      "PEGDBServerPath": null,
      "stutilPath": null,
      "stlinkPath": null,
      "stm32cubeprogrammer": null,
      "enableTelemetry": true,
      "flattenAnonymous": false,
      "registerUseNaturalFormat": true,
      "variableUseNaturalFormat": true,
      "dbgServerLogfile": null,
      "showRTOS": false,
      "showDevDebugOutput": "none"
    }
  },
  "environment": {
    "westExe": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Scripts\\west.exe",
    "westEnv": {
      "ELECTRON_RUN_AS_NODE": "1",
      "HOME": "C:\\Users\\lyh",
      "HOMEDRIVE": "C:",
      "HOMEPATH": "\\Users\\lyh",
      "Path": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\mingw64\\bin;d:\\nordic\\ncs\\v1.9.1\\toolchain\\mingw64\\libexec\\git-core;d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin;d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Scripts;C:\\Program Files (x86)\\Common Files\\Oracle\\Java\\javapath;C:\\Windows\\system32;C:\\Windows;C:\\Windows\\System32\\Wbem;C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\;C:\\Windows\\System32\\OpenSSH\\;C:\\Program Files\\dotnet\\;C:\\Program Files (x86)\\IVI Foundation\\VISA\\WinNT\\Bin\\;C:\\Program Files\\IVI Foundation\\VISA\\Win64\\Bin\\;C:\\Program Files (x86)\\Microsoft SQL Server\\80\\Tools\\Binn\\;C:\\Program Files (x86)\\IVI Foundation\\VISA\\WinNT\\Bin;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\Tools\\Binn\\;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\DTS\\Binn\\;D:\\Program Files\\Git\\cmd;D:\\Program Files\\Microsoft VS Code\\bin;C:\\Program Files (x86)\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\;C:\\ProgramData\\chocolatey\\bin;D:\\Program Files\\python3\\Scripts\\;D:\\Program Files\\python3\\;C:\\Users\\lyh\\AppData\\Local\\Programs\\Python\\Launcher\\;C:\\Users\\lyh\\AppData\\Local\\Microsoft\\WindowsApps;c:\\program files\\esafenet\\cobra docguard client;D:\\Program Files\\Microsoft VS Code\\bin;D:\\MinGW\\bin;D:\\Program Files\\openocd-0.10.0\\bin;D:\\Program Files\\SEGGER\\JLink_V756d;C:\\Program Files (x86)\\Nordic Semiconductor\\nrf-command-line-tools\\bin;D:\\Program Files\\GNU Arm Embedded Toolchain\\10 2020-q4-major\\bin;D:\\gnuarmemb;D:\\gnuarmemb\\bin;",
      "ZEPHYR_BASE": "d:\\nordic\\ncs\\v1.9.1\\zephyr",
      "GNUARMEMB_TOOLCHAIN_PATH": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt",
      "ZEPHYR_TOOLCHAIN_VARIANT": "gnuarmemb",
      "PYTHONPATH": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin;d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Lib;d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Lib\\site-packages",
      "Python3_ROOT": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin"
    },
    "toolchainPath": "d:\\nordic\\ncs\\v1.9.1\\toolchain",
    "toolchainBinPath": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin",
    "toolchainVersion": "1.9.1"
  },
  "terminal": {
    "shell": null,
    "defaultProfile": "nRF Connect"
  }
}

[11:35:51] west build --build-dir e:\nodic\test\nrf_connect_sdk\hello_world\build e:\nodic\test\nrf_connect_sdk\hello_world --pristine --board nrf21540dk_nrf52840 -- -DNCS_TOOLCHAIN_VERSION:STRING="NONE" -DBOARD_ROOT:STRING="e:/nodic/test/nrf_connect_sdk/radio_test" -DCONFIG_DEBUG_OPTIMIZATIONS:STRING="y" -DCONFIG_DEBUG_THREAD_INFO:STRING="y" -DCONF_FILE:STRING="e:/nodic/test/nrf_connect_sdk/hello_world/prj.conf"
[11:35:56] Failure (code 1).
IMPORTANT: The data below could contain sensitive or confidential information about your environment.
If you do not wish this to be seen by others, please make sure to remove it before sharing.

For help and support, visit the Nordic DevZone at https://devzone.nordicsemi.com/.

{
  "platform": {
    "os": "win32",
    "osVersion": "Windows 10 Enterprise LTSC 2019",
    "osKernel": "10.0.17763",
    "vscode": "1.66.2",
    "electron": "17.2.0",
    "node": "v16.13.0"
  },
  "system": {
    "date": "2022-05-06T03:36:07.820Z",
    "vscodeRoot": "d:\\Program Files\\Microsoft VS Code\\resources\\app",
    "nrfConnectForDesktopInstalled": true,
    "vscodeUptime": "00:51:58",
    "osUptime": "01:21:13",
    "cpu": {
      "model": "AMD Ryzen 7 4800U with Radeon Graphics",
      "speed": "1797 MHz",
      "count": 8
    },
    "memory": {
      "total": "15.37 GB",
      "free": "8.39 GB"
    }
  },
  "workspace": {
    "name": "无标题 (工作区)",
    "workspaceFile": "1651805048988",
    "folders": [
      "e:\\nodic\\test\\nrf_connect_sdk\\radio_test",
      "e:\\nodic\\test\\nrf_connect_sdk\\hello_world"
    ]
  },
  "extensions": {
    "internal": {
      "nordic-semiconductor.nrf-connect": {
        "version": "2022.4.219",
        "path": "c:\\Users\\lyh\\.vscode\\extensions\\nordic-semiconductor.nrf-connect-2022.4.219",
        "isActive": true
      },
      "nordic-semiconductor.nrf-terminal": {
        "version": "2022.4.61",
        "path": "c:\\Users\\lyh\\.vscode\\extensions\\nordic-semiconductor.nrf-terminal-2022.4.61",
        "isActive": true
      },
      "nordic-semiconductor.devicetree": null,
      "nordic-semiconductor.kconfig": null
    },
    "external": {
      "marus25.cortex-debug": "1.4.4",
      "ms-vscode.cpptools": "1.9.8",
      "ms-vscode-remote.remote-wsl-recommender": "0.0.15",
      "ms-vscode.js-debug": "1.66.1",
      "ms-vscode.js-debug-companion": "1.0.18",
      "ms-vscode.references-view": "0.0.89",
      "ms-vscode.vscode-js-profile-table": "1.0.0",
      "abusaidm.html-snippets": "0.2.1",
      "akamud.vscode-theme-onedark": "2.2.3",
      "AlexCoderCorp.comments": "1.0.5",
      "analytic-signal.preview-pdf": "1.0.0",
      "atomclip.windows-arm-none-eabi": "0.1.4",
      "batisteo.vscode-django": "1.10.0",
      "bukas.GBKtoUTF8": "0.0.2",
      "christian-kohler.path-intellisense": "2.8.0",
      "cl.keil-assistant": "1.7.0",
      "cschlosser.doxdocgen": "1.4.0",
      "danielpinto8zz6.c-cpp-compile-run": "1.0.15",
      "DavidAnson.vscode-markdownlint": "0.47.0",
      "dbaeumer.vscode-eslint": "2.2.2",
      "donjayamanne.jquerysnippets": "0.0.1",
      "donjayamanne.python-environment-manager": "1.0.4",
      "eamodio.gitlens": "12.0.6",
      "ecmel.vscode-html-css": "1.12.2",
      "formulahendry.auto-close-tag": "0.5.14",
      "formulahendry.auto-rename-tag": "0.1.10",
      "formulahendry.code-runner": "0.11.7",
      "formulahendry.terminal": "0.0.10",
      "GitHub.vscode-pull-request-github": "0.40.0",
      "Gruntfuggly.todo-tree": "0.0.215",
      "hancel.markdown-image": "1.1.20",
      "hbenl.vscode-test-explorer": "2.21.1",
      "hediet.vscode-drawio": "1.6.4",
      "hollowtree.vue-snippets": "1.0.4",
      "in4margaret.compareit": "0.0.2",
      "jeff-hykin.better-cpp-syntax": "1.15.13",
      "kevinglasson.cornflakes-linter": "0.5.1",
      "KevinRose.vsc-python-indent": "1.15.0",
      "magicstack.MagicPython": "1.1.0",
      "McCarter.start-git-bash": "1.2.1",
      "metalcode-eu.windows-arm-none-eabi": "0.1.6",
      "mhutchie.git-graph": "1.30.0",
      "michelemelluso.gitignore": "1.0.1",
      "mikey.vscode-fileheader": "0.0.2",
      "mkaufman.HTMLHint": "0.10.0",
      "MS-CEINTL.vscode-language-pack-zh-hans": "1.66.3",
      "ms-toolsai.jupyter": "2022.3.1000901801",
      "ms-toolsai.jupyter-keymap": "1.0.0",
      "ms-toolsai.jupyter-renderers": "1.0.6",
      "ms-vscode-remote.remote-containers": "0.234.0",
      "ms-vscode-remote.remote-ssh": "0.78.0",
      "ms-vscode-remote.remote-ssh-edit": "0.80.0",
      "ms-vscode-remote.remote-wsl": "0.66.2",
      "ms-vscode.cpptools-extension-pack": "1.1.0",
      "ms-vscode.cpptools-themes": "1.0.0",
      "ms-vscode.test-adapter-converter": "0.1.6",
      "ms-vsliveshare.vsliveshare": "1.0.5527",
      "ms-vsliveshare.vsliveshare-audio": "0.1.91",
      "msjsdiag.debugger-for-chrome": "4.13.0",
      "platformio.platformio-ide": "2.4.3",
      "Shan.code-settings-sync": "3.4.3",
      "shd101wyy.markdown-preview-enhanced": "0.6.2",
      "sidmishraw.topper": "1.5.0",
      "sidthesloth.html5-boilerplate": "1.1.1",
      "steoates.autoimport": "1.5.4",
      "streetsidesoftware.code-spell-checker": "2.1.11",
      "TabNine.tabnine-vscode": "3.5.45",
      "techer.open-in-browser": "2.0.0",
      "tintinweb.graphviz-interactive-preview": "0.2.1",
      "tintinweb.vscode-solidity-language": "0.0.6",
      "trond-snekvik.gnu-mapfiles": "1.1.0",
      "VisualStudioExptTeam.vscodeintellicode": "1.2.20",
      "vscode-icons-team.vscode-icons": "11.11.0",
      "wholroyd.jinja": "0.0.8",
      "wix.vscode-import-cost": "3.3.0",
      "wmaurer.change-case": "1.0.0",
      "xabikos.JavaScriptSnippets": "1.8.0",
      "yzhang.markdown-all-in-one": "3.4.3"
    }
  },
  "tools": {
    "D:\\Program Files\\SEGGER\\JLink_V756d\\JLink.exe": "7.56d",
    "C:\\Program Files (x86)\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\nrfjprog.exe": "10.15.4",
    "nrfutil": "Not found",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\cmake.exe": "3.20.5",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Scripts\\west.exe": "0.12.0",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\python.exe": "3.8.2",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\ninja.exe": "1.9.0",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\gperf.exe": "3.1",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\dtc.exe": "1.4.7",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\arm-none-eabi-gcc.exe": "9-2019-q4-major",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\gn.exe": "1977",
    "d:\\nordic\\ncs\\v1.9.1\\toolchain\\mingw64\\bin\\git.exe": "2.26.2.windows.1"
  },
  "sdks": [
    {
      "version": "1.8.0",
      "path": "d:\\nordic\\ncs\\v1.8.0"
    },
    {
      "version": "1.9.1",
      "path": "d:\\nordic\\ncs\\v1.9.1"
    }
  ],
  "toolchains": [
    {
      "version": "1.8.0",
      "path": "d:\\nordic\\ncs\\v1.8.0\\toolchain"
    },
    {
      "version": "1.9.1",
      "path": "d:\\nordic\\ncs\\v1.9.1\\toolchain"
    }
  ],
  "connectedDevices": [
    {
      "serialNumber": "683449788"
    }
  ],
  "deviceProviders": [
    "nrfjprog"
  ],
  "config": {
    "nordic-semiconductor.nrf-connect": {
      "topdir": "${nrf-connect.sdk:1.9.1}",
      "toolchain": {
        "path": "${nrf-connect.toolchain:1.9.1}"
      },
      "ozonePath": "",
      "applications": [
        "${workspaceFolder}",
        "e:\\nodic\\test\\nrf_connect_sdk\\radio_test",
        "e:\\nodic\\test\\nrf_connect_sdk\\hello_world"
      ],
      "applicationOptions": {},
      "kconfig": {
        "interface": "kconfig"
      },
      "welcome": {
        "showOnStartup": false
      },
      "west": {
        "env": {
          "$base": "terminal"
        }
      },
      "boardRoots": [],
      "enableTelemetry": true
    },
    "nordic-semiconductor.nrf-terminal": {
      "terminalMode": "character"
    },
    "nordic-semiconductor.devicetree": {
      "modules": [
        "${zephyrBase}",
        "${zephyrBase}/../nrf",
        "."
      ],
      "zephyr": "",
      "ctxFile": "",
      "defaultBoard": ""
    },
    "nordic-semiconductor.kconfig": {
      "root": "",
      "env": {},
      "cfiles": true,
      "disable": false,
      "zephyr": {
        "base": ""
      },
      "python": "D:/nordic/ncs/v1.9.1/toolchain/opt/bin/python.exe",
      "liveValue": true
    },
    "marus25.cortex-debug": {
      "armToolchainPath": "D:/Program Files/GNU Arm Embedded Toolchain/10 2020-q4-major/bin",
      "armToolchainPrefix": "arm-none-eabi",
      "gdbPath": null,
      "objdumpPath": null,
      "JLinkGDBServerPath": "D:/Program Files/SEGGER/JLink_V756d/JLinkGDBServerCL.exe",
      "openocdPath": "D:/Program Files/openocd-0.10.0/bin",
      "pyocdPath": null,
      "PEGDBServerPath": null,
      "stutilPath": null,
      "stlinkPath": null,
      "stm32cubeprogrammer": null,
      "enableTelemetry": true,
      "flattenAnonymous": false,
      "registerUseNaturalFormat": true,
      "variableUseNaturalFormat": true,
      "dbgServerLogfile": null,
      "showRTOS": false,
      "showDevDebugOutput": "none"
    }
  },
  "environment": {
    "westExe": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Scripts\\west.exe",
    "westEnv": {
      "ELECTRON_RUN_AS_NODE": "1",
      "HOME": "C:\\Users\\lyh",
      "HOMEDRIVE": "C:",
      "HOMEPATH": "\\Users\\lyh",
      "Path": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\mingw64\\bin;d:\\nordic\\ncs\\v1.9.1\\toolchain\\mingw64\\libexec\\git-core;d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin;d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Scripts;C:\\Program Files (x86)\\Common Files\\Oracle\\Java\\javapath;C:\\Windows\\system32;C:\\Windows;C:\\Windows\\System32\\Wbem;C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\;C:\\Windows\\System32\\OpenSSH\\;C:\\Program Files\\dotnet\\;C:\\Program Files (x86)\\IVI Foundation\\VISA\\WinNT\\Bin\\;C:\\Program Files\\IVI Foundation\\VISA\\Win64\\Bin\\;C:\\Program Files (x86)\\Microsoft SQL Server\\80\\Tools\\Binn\\;C:\\Program Files (x86)\\IVI Foundation\\VISA\\WinNT\\Bin;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\Tools\\Binn\\;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\DTS\\Binn\\;D:\\Program Files\\Git\\cmd;D:\\Program Files\\Microsoft VS Code\\bin;C:\\Program Files (x86)\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\;C:\\ProgramData\\chocolatey\\bin;D:\\Program Files\\python3\\Scripts\\;D:\\Program Files\\python3\\;C:\\Users\\lyh\\AppData\\Local\\Programs\\Python\\Launcher\\;C:\\Users\\lyh\\AppData\\Local\\Microsoft\\WindowsApps;c:\\program files\\esafenet\\cobra docguard client;D:\\Program Files\\Microsoft VS Code\\bin;D:\\MinGW\\bin;D:\\Program Files\\openocd-0.10.0\\bin;D:\\Program Files\\SEGGER\\JLink_V756d;C:\\Program Files (x86)\\Nordic Semiconductor\\nrf-command-line-tools\\bin;D:\\Program Files\\GNU Arm Embedded Toolchain\\10 2020-q4-major\\bin;D:\\gnuarmemb;D:\\gnuarmemb\\bin;",
      "ZEPHYR_BASE": "d:\\nordic\\ncs\\v1.9.1\\zephyr",
      "GNUARMEMB_TOOLCHAIN_PATH": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt",
      "ZEPHYR_TOOLCHAIN_VARIANT": "gnuarmemb",
      "PYTHONPATH": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin;d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Lib;d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin\\Lib\\site-packages",
      "Python3_ROOT": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin"
    },
    "toolchainPath": "d:\\nordic\\ncs\\v1.9.1\\toolchain",
    "toolchainBinPath": "d:\\nordic\\ncs\\v1.9.1\\toolchain\\opt\\bin",
    "toolchainVersion": "1.9.1"
  },
  "terminal": {
    "shell": null,
    "defaultProfile": "nRF Connect"
  }
}

RE: nRF Connect on VSCode unable to build applicatios

andy — Fri, 06 May 2022 03:41:50 GMT

Hi, i have a same issue,this is my Support information blow, is there anything should be

RE: nRF Connect on VSCode unable to build applicatios

Marte Myrvold — Tue, 22 Feb 2022 12:48:16 GMT

Hi,

The path to the applications are there, so they should have shown up in the 'Application' tab. I also do not see any issues with the tools or versions.

Can you try uninstalling nRF Connect SDK and installing it directly under your C:\ directory, e.g. C:\ncs\v1.8.0? There is an issue with path length on Windows, so if the path to the SDK installation is long, such as under C:\Users\<username\..., then it can cause problems when building.

For the applications they should show up already, but you can try to add them manually in settings. Go to settings and select 'Workspace', then go to 'Extensions' > 'nRF Connect'. Try to add the path to your applications under 'Applications'.

Best regards,

Marte

RE: nRF Connect on VSCode unable to build applicatios

Sam J Mathew — Sat, 19 Feb 2022 01:49:11 GMT

Here is the output:

IMPORTANT: The data below could contain sensitive or confidential information about your environment.
If you do not wish this to be seen by others, please make sure to remove it before sharing.

For help and support, visit the Nordic DevZone at https://devzone.nordicsemi.com/.

{
  "platform": {
    "os": "win32",
    "osVersion": "Windows 10 Home",
    "osKernel": "10.0.19042",
    "vscode": "1.64.2",
    "electron": "13.5.2",
    "node": "v14.16.0"
  },
  "system": {
    "date": "2022-02-19T01:46:18.827Z",
    "vscodeRoot": "c:\\Users\\Sam\\AppData\\Local\\Programs\\Microsoft VS Code\\resources\\app",
    "nrfConnectForDesktopInstalled": true,
    "vscodeUptime": "63:05:53",
    "osUptime": "590:00:25",
    "cpu": {
      "model": "Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz",
      "speed": "1800 MHz",
      "count": 4
    },
    "memory": {
      "total": "7.92 GB",
      "free": "1.35 GB"
    }
  },
  "workspace": {
    "name": "Untitled (Workspace)",
    "workspaceFile": "1642962931813",
    "folders": [
      "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\blinky",
      "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\central_uart"
    ]
  },
  "extensions": {
    "internal": {
      "nordic-semiconductor.nrf-connect": {
        "version": "2022.1.192",
        "path": "c:\\Users\\Sam\\.vscode\\extensions\\nordic-semiconductor.nrf-connect-2022.1.192",
        "isActive": true
      },
      "nordic-semiconductor.nrf-terminal": {
        "version": "2022.1.30",
        "path": "c:\\Users\\Sam\\.vscode\\extensions\\nordic-semiconductor.nrf-terminal-2022.1.30",
        "isActive": true
      },
      "nordic-semiconductor.devicetree": null,
      "nordic-semiconductor.kconfig": null
    },
    "external": {
      "marus25.cortex-debug": "1.2.2",
      "ms-vscode.cpptools": "1.9.0",
      "ms-vscode-remote.remote-wsl-recommender": "0.0.12",
      "ms-vscode.js-debug": "1.64.3",
      "ms-vscode.js-debug-companion": "1.0.15",
      "ms-vscode.references-view": "0.0.81",
      "ms-vscode.vscode-js-profile-table": "0.0.18",
      "cschlosser.doxdocgen": "1.3.2",
      "jeff-hykin.better-cpp-syntax": "1.15.13",
      "ms-vscode-remote.remote-containers": "0.217.4",
      "ms-vscode-remote.remote-ssh": "0.74.0",
      "ms-vscode-remote.remote-wsl": "0.64.2",
      "ms-vscode.cpptools-extension-pack": "1.1.0",
      "ms-vscode.cpptools-themes": "1.0.0",
      "trond-snekvik.gnu-mapfiles": "1.1.0",
      "twxs.cmake": "0.0.17"
    }
  },
  "tools": {
    "C:\\Program Files (x86)\\SEGGER\\JLink\\JLink.exe": "7.58b",
    "C:\\Program Files (x86)\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\nrfjprog.exe": "10.15.2",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\cmake.exe": "3.20.5",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\Scripts\\west.exe": "0.12.0",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\python.exe": "3.8.2",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\ninja.exe": "1.9.0",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\gperf.exe": "3.1",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\dtc.exe": "1.4.7",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\arm-none-eabi-gcc.exe": "9-2019-q4-major",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\gn.exe": "1959",
    "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\mingw64\\bin\\git.exe": "2.26.2.windows.1"
  },
  "connectedDevices": [
    {
      "id": "683360999"
    }
  ],
  "config": {
    "nordic-semiconductor.nrf-connect": {
      "topdir": "${nrf-connect.sdk:1.8.0}",
      "toolchain": {
        "path": "${nrf-connect.toolchain:1.8.0}"
      },
      "ozonePath": "",
      "applications": [
        "c:\\Users\\Sam\\Documents\\5ense\\Nordic_BLE\\central",
        "c:\\Users\\Sam\\Documents\\5ense\\Nordic-BLE-Fitness\\central",
        "c:\\Users\\Sam\\Documents\\5ense\\BLE_Fitness_Connect\\central",
        "c:\\Users\\Sam\\Documents\\5ense\\Fitness_BLE_Connect\\hello_world",
        "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\central",
        "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\central_and_peripheral_hr",
        "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\nrf_desktop",
        "${workspaceFolder:thermometer}",
        "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\Test-1\\central",
        "c:\\Users\\Sam\\ncs\\v1.8.0\\WS_BLE\\hello_world",
        "${workspaceFolder:blinky}",
        "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\capture",
        "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\blinky",
        "c:\\Users\\Sam\\Documents\\5ense\\Fitness-BLE\\central_uart"
      ],
      "jlink": {
        "rtosPlugin": ""
      },
      "kconfig": {
        "interface": "kconfig"
      },
      "welcome": {
        "showOnStartup": false
      },
      "west": {
        "env": {
          "$base": "terminal"
        }
      },
      "boardRoots": [],
      "enableTelemetry": true
    },
    "nordic-semiconductor.nrf-terminal": {
      "terminalMode": "character"
    },
    "nordic-semiconductor.devicetree": {
      "modules": [
        "${zephyrBase}",
        "${zephyrBase}/../nrf",
        "."
      ],
      "zephyr": "",
      "ctxFile": "",
      "defaultBoard": ""
    },
    "nordic-semiconductor.kconfig": {
      "root": "",
      "env": {},
      "cfiles": true,
      "disable": false,
      "zephyr": {
        "base": ""
      },
      "python": "",
      "liveValue": true
    },
    "marus25.cortex-debug": {
      "armToolchainPath": null,
      "armToolchainPrefix": "arm-none-eabi",
      "gdbPath": null,
      "objdumpPath": null,
      "JLinkGDBServerPath": null,
      "openocdPath": null,
      "pyocdPath": null,
      "PEGDBServerPath": null,
      "stutilPath": null,
      "stlinkPath": null,
      "stm32cubeprogrammer": null,
      "enableTelemetry": true,
      "flattenAnonymous": false,
      "registerUseNaturalFormat": true,
      "variableUseNaturalFormat": true,
      "dbgServerLogfile": null,
      "showDevDebugOutput": "none"
    }
  },
  "environment": {
    "westExe": "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\Scripts\\west.exe",
    "westEnv": {
      "ELECTRON_RUN_AS_NODE": "1",
      "HOME": "C:\\Users\\Sam",
      "HOMEDRIVE": "C:",
      "HOMEPATH": "\\Users\\Sam",
      "Path": "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\mingw64\\bin;c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\mingw64\\libexec\\git-core;c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin;c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\Scripts;C:\\Program Files\\Microsoft\\jdk-11.0.12.7-hotspot\\bin;C:\\WINDOWS\\system32;C:\\WINDOWS;C:\\WINDOWS\\System32\\Wbem;C:\\WINDOWS\\System32\\WindowsPowerShell\\v1.0\\;C:\\WINDOWS\\System32\\OpenSSH\\;C:\\Program Files\\PuTTY\\;C:\\Users\\Sam\\AppData\\Local\\Programs\\Python\\Python39;C:\\Program Files\\Microsoft SQL Server\\150\\Tools\\Binn\\;C:\\Program Files\\Git\\cmd;C:\\Program Files\\Microsoft SQL Server\\Client SDK\\ODBC\\170\\Tools\\Binn\\;C:\\Program Files\\dotnet\\;C:\\Program Files (x86)\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\;C:\\Program Files\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\;C:\\Users\\Sam\\AppData\\Local\\Microsoft\\WindowsApps;C:\\Users\\Sam\\AppData\\Local\\Programs\\Python\\Python39;C:\\Users\\Sam\\AppData\\Local\\Programs\\Python\\Python39\\Scripts;C:\\Users\\Sam\\.dotnet\\tools;C:\\Users\\Sam\\AppData\\Local\\Programs\\Microsoft VS Code\\bin",
      "ZEPHYR_BASE": "c:\\Users\\Sam\\ncs\\v1.8.0\\zephyr",
      "GNUARMEMB_TOOLCHAIN_PATH": "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt",
      "ZEPHYR_TOOLCHAIN_VARIANT": "gnuarmemb",
      "PYTHONPATH": "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin;c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\Lib;c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin\\Lib\\site-packages",
      "Python3_ROOT": "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin"
    },
    "toolchainPath": "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain",
    "toolchainBinPath": "c:\\Users\\Sam\\ncs\\v1.8.0\\toolchain\\opt\\bin",
    "toolchainVersion": "1.8.0"
  },
  "terminal": {
    "shell": null,
    "defaultProfile": null
  }
}

RE: nRF Connect on VSCode unable to build applicatios

Marte Myrvold — Thu, 17 Feb 2022 14:26:57 GMT

Hi,

Can you upload the support information from VS Code? To get it open Command Palette and write nRF Connect: Generate Support Information. The information will be generated in the output terminal. Copy it and upload it here with Insert > Code.

Best regards,

Marte

RE: nRF Connect on VSCode unable to build applicatios

Sam J Mathew — Wed, 16 Feb 2022 10:45:35 GMT

Hello Marte,

I tried removing the extension but that didn't resolve the issue.

Thank you,

Sam Mathew

RE: nRF Connect on VSCode unable to build applicatios

Marte Myrvold — Mon, 14 Feb 2022 12:43:36 GMT

Hi,

Do you have the CMake Tools extension installed? It might cause issues with Zephyr's build system, so please try disabling it and see if you still get the same issue.

Best regards,

Marte