Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

tejas_dev — Thu, 07 Apr 2022 13:33:38 GMT

hi charlie, i understand ,

i checked with actinius but no reply yet i am working on it if i get any solutions i will post it here,

thank you for your help

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

Charlie — Thu, 07 Apr 2022 13:01:38 GMT

Hi tejas_dev,

It will be much easier to debug this issue with the hardware on hand. Have you checked with About (actinius.com) directly?

Best regards,

Charlie

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

tejas_dev — Thu, 07 Apr 2022 07:36:41 GMT

Hi charlie, Actually i tried deleting all the sensors related code and tried with it, it Builds and it also flashes.

But when i run in putty it shows me "GPIO binding Not found" and also image not verified(-5)

What can be the reason?

i have deleted all the pheripherals and ports related to nrf what can be the reason for this please ask me if you need furthur info

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

Charlie — Thu, 31 Mar 2022 10:40:21 GMT

Hi Tejas_dev,

No, you do not need to create a new device tree file(which describes the hardware) for this board since the manufacturer already add it to Zephyr project, but you do need to adapt the sample codes because some pins are modified and even some peripherals are not used on this custom board.

Best regards,

Charlie

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

tejas_dev — Wed, 30 Mar 2022 13:24:48 GMT

One silly question though, the command actinius_icarus_ns works for other samples will it be easier or better to make that sample as a lwm2m client sample with my sensor from icarus baord instead of creating a new board to the sample, because i see lot of adjustments need to be done if i create a new board and build for the same source file.

just a silly doubt hope it will clear my doubt in proceeding

thanks in advance

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

tejas_dev — Wed, 30 Mar 2022 10:52:02 GMT

thank you so much i will try to add my device and get back to you. thank you

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

Charlie — Wed, 30 Mar 2022 09:11:07 GMT

Hi tejas_dev,

You shouldn't expect a third-part board would work with official NCS samples directly, every sample has one section listing the board it supports.

You need to either check with the manufacturer if they have a similar sample you need or port the original sample by yourself. NSC provides some guidance about how to work with a custom board and implement your own application based on NCS.

Board support — nRF Connect SDK 1.9.1 documentation (nordicsemi.com)

Development model — nRF Connect SDK 1.9.1 documentation (nordicsemi.com)

Logging in nRF Connect SDK — nRF Connect SDK 1.9.1 documentation (nordicsemi.com)

If you have some specific issues during your porting, please share more details, especially the log files.

Best regards,

Charlie

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

tejas_dev — Wed, 30 Mar 2022 08:04:34 GMT

Thanks Charlie, i have found this sample to be working for coiote device management, however if i want to connect my icarus board the samples seems to be not working, i mean are there any different files to connect my icarus board and get the actual data not the simulated one

RE: Need Help With Connecting (configuring) NRF9160dk as LWM2M Client to the Coiote Iot device management(test server).

Charlie — Mon, 28 Mar 2022 12:52:33 GMT

Hi tejas_dev,

I am not sure how you get access to https://lwm2m-test.avsystem.io/, and what the difference it has with the above two demo servers.

Have you done any tests with Leshan Demo Server web UI or Coiote Device Management server mentioned by nRF9160: LwM2M Client? same issues? You can find more useful information from the log output.

Best regards,

Charlie