Sending AT commands from nrfcloud terminal to LTE Device

RE: Sending AT commands from nrfcloud terminal to LTE Device

Lincoln Thomas — Wed, 18 May 2022 19:22:18 GMT

Just to clarify, the sample application Asset Tracker v2 does not include code to process messages whose "appId" = "MODEM", so they will not be sent to the modem.

You can parse the received JSON and send the contents of the data field to the modem using nrf_modem_at_cmd defined in nrf_modem_at.h . You can add this code to Asset Tracker or other NCS samples or your own firmware.

To see the responses from the modem in the Terminal card of nrfcloud.com, you could use nrf_cloud_send to send a JSON formatted message to nRF Cloud via MQTT.

RE: Sending AT commands from nrfcloud terminal to LTE Device

Rossen — Mon, 11 Apr 2022 12:00:41 GMT

Thanks a lot! I will test it.

RE: Sending AT commands from nrfcloud terminal to LTE Device

Øyvind — Mon, 11 Apr 2022 11:53:27 GMT

Hello,

Have a look at the nRF Cloud Github repo. Under Application-Protocols/Schemas/CloudToDevice there are several examples on how to send JSON messages from Cloud To Device, among others modem:

{
    "appId":"MODEM",
    "messageType":"CMD",
    "data":"AT+CFUN?\r\n"
}

I have not tested with PSM, you will need add this yourself.

Kind regards,
Øyvind

RE: Sending AT commands from nrfcloud terminal to LTE Device

Rossen — Fri, 08 Apr 2022 12:29:29 GMT

So there should be some parsing mechanism within the Application that was developed and deployed on the nrf9160.

As part of the AssetTracker we are not able to send AT Commands over JSON, correct?

RE: Sending AT commands from nrfcloud terminal to LTE Device

Hakon — Fri, 08 Apr 2022 12:19:05 GMT

Unfortunately I don't think there is any example code for this.

RE: Sending AT commands from nrfcloud terminal to LTE Device

Rossen — Thu, 07 Apr 2022 13:54:03 GMT

Can you please provide an example?

RE: Sending AT commands from nrfcloud terminal to LTE Device

Hakon — Thu, 07 Apr 2022 13:43:50 GMT

Hello,

you should be able to send the at cmd as a string in the JSON object, and then parse it on the nrf9160 device.

RE: Sending AT commands from nrfcloud terminal to LTE Device

Rossen — Tue, 05 Apr 2022 14:29:16 GMT

Application used: AssetTracker v 2.0 from the package release in February 2022;

mfw_nrf9160_1.3.1