Multichannel ADC readings with nRF52DK

RE: Multichannel ADC readings with nRF52DK

Karl Ylvisaker — Mon, 27 Jun 2022 12:15:46 GMT

Hello again,

[quote user="nerdybee"]Thank you for your reply![/quote]

No problem at all, I am happy to help! :)

[quote user="nerdybee"]I believe I am using the nRF Connect SDK. I am hoping to only get 1 reading every 5 minutes or so, so the frequency won't be a huge constrain. Do you have any starting point you recommend within the nRF Connect SDK environment?[/quote]

You could take a look at this example as a reference, it demonstrates pretty much exactly the functionality you describe. If you are starting out with the nRF Connect SDK I would recommend that you have a look at the DevZone Academy for the nRF Connect Fundamentals course.

Please do not hesitate to ask if you should encounter any issues or questions along the way!

Best regards,
Karl

RE: Multichannel ADC readings with nRF52DK

nerdybee — Thu, 23 Jun 2022 14:29:23 GMT

Hi Karl,

Thank you for your reply! I believe I am using the nRF Connect SDK. I am hoping to only get 1 reading every 5 minutes or so, so the frequency won't be a huge constrain. Do you have any starting point you recommend within the nRF Connect SDK environment?

Thank you again!

RE: Multichannel ADC readings with nRF52DK

Karl Ylvisaker — Thu, 23 Jun 2022 14:25:39 GMT

Hello,

First, could you tell me which SDK you are working with - the nRF5 SDK, or the nRF Connect SDK?
If you are starting a new project, or completely new to Nordic development I would suggest that you start out with the nRF Connect SDK since this is where out active development is happening.

Additionally, what sampling frequency will you be using?

Best regards,
Karl