Actinius Icarus + Nordicsemi asset tracker: adaptations?

RE: Actinius Icarus + Nordicsemi asset tracker: adaptations?

JONATHAN LL — Mon, 11 Jul 2022 07:51:20 GMT

I dont know haow you have buildt the applicaiton you are now using, but if you used pre compiled hexfile that is avalable for our DK or Thingy91 from our website that will not work, and the same would go for if you where to build the sample with the buildcommends for th eThingy91 og nRF9160DK.

You would need to a custom board file, or build for the DK but with an overlay file. But the Icarus board seems to be supported in Zephyr, https://docs.zephyrproject.org/3.1.0/boards/arm/actinius_icarus/doc/index.html, so i thin buidling whatever applicaion you wnat for that board should be fine.

You weould also need your own certificates yes if you are goning to use a coulds solution that

Adding som links that can prove usefulle:

https://nrfconnect.github.io/vscode-nrf-connect/index.html

https://academy.nordicsemi.com/

Asset tracker v1 https://nordicsemiconductor.github.io/asset-tracker-cloud-docs/saga/

Asset Tracker v2 https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/applications/asset_tracker_v2/README.html (Recommended)

Cellulart IoT guide

Regards,
Jonathan

RE: Actinius Icarus + Nordicsemi asset tracker: adaptations?

MostlyHardware — Sat, 09 Jul 2022 16:59:06 GMT

Thanks Jonathan. I'm a bit unfamiliar with Zephyr so I will do some reading there.

But basically what you're saying is that I just need to point to the right board file and it should work? I guess I need to flash a different set of certificates to the modem if I want to connect to AWS or the nRF cloud?

Thanks for the ideas and pointers, will do some reading and further research.

Regards,

RE: Actinius Icarus + Nordicsemi asset tracker: adaptations?

JONATHAN LL — Fri, 08 Jul 2022 08:47:03 GMT

Hi,

Just a quick first reply, I would recommend that you also check out other forums, like ones that are dedicated to the Icarus board or check on the Zephyr forums also.

But in short, if you have the board files for the Icarus, then if you where to build the Asset Tracker V2 application it should work, it might not have alle the extra sensors like the Thingy91 has but is should do the same job as the nRF9160 DK at least. You might also find others here on Devzone that have asked similar questions before.

Due to summer holiday here in Norway staffing is low, so we will help you with this issue when we have the time. Pardon the inconvenience.

Regards,
Jonathan