Serial LTE modem on SIAA

RE: Serial LTE modem on SIAA

Øyvind — Thu, 07 Jul 2022 07:04:12 GMT

Very happy to hear!

[quote user="yesheng"]Thanks for the help![/quote]

Happy to help!

RE: Serial LTE modem on SIAA

yesheng — Thu, 07 Jul 2022 06:19:39 GMT

Hi Øyvind,

I got it to work. The exact step I did was:

1. Do a whole chip erase
2. Flash modem FW
3. edit the board conf file to switch to UART2
4. edit the board overlay file to enable UART2 (set status = "okay")
5. add config_SLM_GNSS=n to proj.conf
6. Compile, and flash merged.hex to the target

Thanks for the help!

RE: Serial LTE modem on SIAA

Øyvind — Wed, 06 Jul 2022 12:18:38 GMT

Hi,

Happy to about your progress.

[quote user="yesheng"]I disabled the GNSS in Kconfig[/quote]

Yes, this would be my suggestion as well. You need to disable any GPS configuration.

[quote user="yesheng"]Then I realized SIAA doesn't have GPS, so I tried modifying nrf9160dk_nrf9160_ns_defconfig to[/quote]

There is no configuration for SOC_NRF9160_SIAA in Zephyr, only SOC_NRF9160_SICA. Were you able to build with SOC_NRF9160_SIAA?

[quote user="yesheng"]thoughts? [/quote]

We will need to see more logging in order to find the root cause. Are you using JLink programmer to program your device? If so, can you please ensure that you have JLink RTT Viewer. The log backend is configured to RTT in the SLM application by default.

Thanks!

Kind regards,
Øyvind

RE: Serial LTE modem on SIAA

yesheng — Wed, 06 Jul 2022 07:43:31 GMT

Hi Øyvind,

I got a little further. I disabled the GNSS in Kconfig. code compiles, but stuck in a boot loop.

00> *** Booting Zephyr OS build v3.0.99-ncs1  ***
00> I: Starting bootloader
00> I: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
00> I: Secondary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
00> I: Boot source: none
00> I: Swap type: none
00> I: Bootloader chainload address offset: 0x10000
00> I: Jumping to the first image slot
00> *** Booting Zephyr OS build v3.0.99-ncs1  ***
00> I: Starting bootloader
00> I: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
00> I: Secondary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
00> I: Boot source: none
00> I: Swap type: none
00> I: Bootloader chainload address offset: 0x10000
00> I: Jumping to the first image slot

thoughts? Thanks!

RE: Serial LTE modem on SIAA

yesheng — Wed, 06 Jul 2022 07:07:12 GMT

Hi Øyvind,

Sorry for missing information. Initially, I tried to enable UART2 only. I can compile it, and I upload to the SIAA chip, but I got this error message:

00> *** Booting Zephyr OS build v3.0.99-ncs1  ***
00> 
00> [00:00:00.498,657] <inf> slm: Serial LTE Modem
00> [00:00:00.508,666] <err> nrf_cloud_client_id: Failed to get device UUID: -8
00> [00:00:00.508,697] <err> nrf_cloud_transport: Could not obtain configured client ID, error: -8
00> [00:00:00.508,697] <err> slm_gnss: Cloud could not be initialized, error: -8
00> [00:00:00.508,728] <err> slm_at: GPS could not be initialized: -8
00> [00:00:00.508,728] <err> slm: Failed to init at_host: -14

Then I realized SIAA doesn't have GPS, so I tried modifying nrf9160dk_nrf9160_ns_defconfig to

CONFIG_SOC_NRF9160_SIAA=y

the compiler returns the error message:

nrf9160dk_nrf9160_ns_defconfig:4: warning: attempt to assign the value 'y' to the undefined symbol SOC_NRF9160_SIAA

I looked into the zepher/boards folder trying to find one with SIAA target, but cannot find any. I'm wondering how can I change the target to SIAA.

I'm using ncs 2.0.0.

Thanks!

RE: Serial LTE modem on SIAA

Øyvind — Wed, 06 Jul 2022 06:44:39 GMT

Hello,

Can you please provide some more information. What error are you seeing? What version of the nRF Connect SDK are you working on? What modem FW are you running on you board?

Thanks.

Kind regards,
Øyvind