52840 10056 DK problem

RE: 52840 10056 DK problem

fmar — Mon, 18 Jul 2022 10:11:19 GMT

Hi Jared,

I can confirm the Softdevice is (and was) listed as additional load file in the project settings. Also, the project file itself is under version control, so there's no chance for me to inadvertently modify this setting.

Now (after manually loading the softdevice once) everything works fine, so I guess we can close the ticket up until I find a way to reproduce the situation.

Thanks.

Francesco

RE: 52840 10056 DK problem

Jared — Fri, 15 Jul 2022 11:55:38 GMT

Hi,

Yes, I suspected that this was the root cause. Softdevice examples needs the Softdevice to be flashed for it to start. Usually, our examples are pre-configured so that it flash the Softdevice automatically when you flash with the SES IDE. Check if the Softdevice is listed as additonal load file in the project settings in SES. Note that you have to change the configuration in the upper left corner from release to common:

regards

Jared

RE: 52840 10056 DK problem

fmar — Thu, 14 Jul 2022 13:44:16 GMT

Hi Jared,

it seems I solved (90%) the issue. All the (example) projects I was using do use a softdevice, which was not loaded (anymore) on the DK. Manually loading the softdevice on the DK apparently solved the issue.

However (last 10%) I could not still figure out why this has happened, and why in the build/deploy/debug chain of events not even a warning came out.

Regards,

Francesco

RE: 52840 10056 DK problem

Jared — Thu, 14 Jul 2022 13:24:46 GMT

Hi,

Is the program successfully flashed to the IC though? If you flash the blinky example, do you see the LED blinking?

regards

Jared