openthread FTD child not receiving UDP message

RE: openthread FTD child not receiving UDP message

Charlie — Tue, 30 Aug 2022 10:50:13 GMT

Hi Mohanmed,

Ok, so this means they have an IP connection, but for some reason, the UPD command on the CLI device has some issue showing it receives the UDP message.

Have you run a command like "udp connect fdde:ad00:beef:0:bb1:ebd6:ad10:f33 11" to specify it should listen to sending device IP on port 11 for coming UPD package.

openthread/README_UDP.md at main · openthread/openthread (github.com)

If the problem still exists, could you try to report this issue to Issues · openthread/openthread (github.com) about this potential bug on CLI UDP command?

Best regards,

Charlie

RE: openthread FTD child not receiving UDP message

kalbani — Thu, 25 Aug 2022 08:52:38 GMT

Hello Charlie,

Yes I can ping the target child successfully. and we can get the routing tables.

did you try to use the cli open UDP & Bind code? (bind multicast ( "::" ) to port 11)

Mohammed

RE: openthread FTD child not receiving UDP message

Charlie — Wed, 10 Aug 2022 11:52:07 GMT

Hi Mohammed,

Are you able to ping the target child node?

Have you checked the devices routing tables?

Best regards,

Charlie

RE: openthread FTD child not receiving UDP message

kalbani — Tue, 09 Aug 2022 05:03:04 GMT

Hi Charlie,

sorry for late update, I tried use (ML-EID) to send UDP message to child node but the child did not receive any message until changing the role to router.

I add ( CONFIG_OPENTHREAD_CHILD_SUPERVISION=y ) but did not work for me.

RE: openthread FTD child not receiving UDP message

Charlie — Fri, 15 Jul 2022 12:16:37 GMT

Hi Mohanmed,

Have you tested with Mesh-Local EID (ML-EID)? I think you should use this address on your application.

I think using RLOC should be also fine on your test. Can you use ping to test? you can check the routing table of devices like Build a Thread network with nRF52840 boards and OpenThread?

Best regards,

Charlie