get error message when running exsample project on nrf5340DK

RE: get error message when running exsample project on nrf5340DK

Einar Thorsrud — Thu, 05 Sep 2024 10:39:05 GMT

Hi,

You need to build the project as described under Building and running nRF5340 Audio applications in order to generate the .hex files. Please make a new question for it if you need further assistance.

RE: get error message when running exsample project on nrf5340DK

pal_722 — Thu, 05 Sep 2024 10:10:38 GMT

Hi Einar Thorsrud

I am unable to find any hex file under C:\v2.6.1\nrf\applications\nrf5340_audio

Can you help?

Best Regards

RE: get error message when running exsample project on nrf5340DK

Einar Thorsrud — Fri, 05 Jan 2024 08:25:45 GMT

Yes, that is correct

RE: get error message when running exsample project on nrf5340DK

derickchou — Fri, 05 Jan 2024 08:10:52 GMT

Hi, Einar

Where is the nrf\applications\nrf5340_audio\bin\ folder you refer to?
Is it within the ncs folder? \ncs\v2.x.x\nrf\applications\nrf5340_audio

BR & Thanks

RE: get error message when running exsample project on nrf5340DK

Zhongsan — Wed, 03 Aug 2022 23:34:01 GMT

Hi, Einar

copy that, thanks a lot

RE: get error message when running exsample project on nrf5340DK

Einar Thorsrud — Wed, 03 Aug 2022 12:59:20 GMT

Hi,

The tools handle that by themselves. For instance, you can program the net core hex using nRF Connect Programmer (other options are also possible). And for the application core, just program from the IDE like you did before but after doing the configuration change as I suggested. When only the application image is built, that is also the only thing that is programmed.

RE: get error message when running exsample project on nrf5340DK

Zhongsan — Wed, 03 Aug 2022 12:53:34 GMT

Hi, Einar

how to program the netcore and application-core separately

thanks

RE: get error message when running exsample project on nrf5340DK

Einar Thorsrud — Wed, 03 Aug 2022 11:46:26 GMT

Hi,

The example only work with the LE Audio Controller Subsystem for nRF53 (see nRF5340 Audio), so you need to do a few things. Firstly, add these two lines to prj.cof within broadcast_audio_source:

CONFIG_NCS_INCLUDE_RPMSG_CHILD_IMAGE=n # Make sure NCS build system won't build network core for us
CONFIG_BT_HCI_VS_EXT=n # Since we are not going to use Zephyr controller, so we have to disabled the VS command for Zephyr

Then program the firmware hex found under nrf\applications\nrf5340_audio\bin\ on the network core.

Lastly, program the application core firmware you just built.

Then you should see a log output like this:

*** Booting Zephyr OS build v3.0.99-ncs1  ***
Bluetooth initialized
Creating broadcast source
Starting broadcast source
Broadcast source started
Waiting 30 seconds before stopped
[00:00:00.452,087] <inf> bt_hci_core: Identity: F3:04:16:52:BB:ED (random)
[00:00:00.452,148] <inf> bt_hci_core: HCI: version 5.2 (0x0b) revision 0x0cd7, manufacturer 0x07e8
[00:00:00.452,148] <inf> bt_hci_core: LMP: version 5.2 (0x0b) subver 0x0cd7
Sent 1000 total ISO packets
Sent 2000 total ISO packets
Sent 3000 total ISO packets
Stopping broadcast source
Broadcast source stopped
Deleting broadcast source
Broadcast source deleted
Creating broadcast source
Starting broadcast source
Broadcast source started
Waiting 30 seconds before stopped
Sent 4000 total ISO packets
Sent 5000 total ISO packets
Sent 6000 total ISO packets
Stopping broadcast source
Broadcast source stopped
Deleting broadcast source
Broadcast source deleted
Creating broadcast source
Starting broadcast source
Broadcast source started
Waiting 30 seconds before stopped
...

RE: get error message when running exsample project on nrf5340DK

Zhongsan — Tue, 02 Aug 2022 13:50:32 GMT

and after adding:

CONFIG_BT_EXT_ADV=y

CONFIG_BT_PER_ADV=y

to:

samples/bluetooth/hci_rpmsg/prj.conf

i got following message:

[21:48:02:137] *** Booting Zephyr OS build v3.0.99-ncs1-2479-g78f2648f85e9 ***
[21:48:02:158] [00:00:00.450,073] <0x1b>[0m<dbg> bt_hci_core: bt_hci_driver_register: Registered RPMsg<0x1b>[0m
[21:48:02:158] [00:00:00.455,749] <0x1b>[0m<dbg> bt_hci_core: hci_tx_thread: Started<0x1b>[0m
[21:48:02:159] <0x1b>[1;31m--- 106 messages dropped ---
[21:48:02:164] <0x1b>[0m[00:00:00.478,942] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_send: buf 0xBluetooth initialized
[21:48:02:183] Creating broadcast source
[21:48:02:183] 20006514 type 0 len 3<0x1b>[0m
[21:48:02:189] <0x1b>[1;31m--- 367 messages dropped ---
[21:48:02:196] <0x1b>[Starting broadcast source
[21:48:02:199] 0m[00:00Unable to start broadcast source: -5
[21:48:02:441] :00.510,589] <0x1b>[0m<dbg> bt_conn: bt_conn_prepare_events: <0x1b>[0m
[21:48:02:441] <0x1b>[1;31m--- 123 messages dropped ---
[21:48:02:441] <0x1b>[0m[00:00:00.513,885] <0x1b>[0m<dbg> bt_iso: bt_iso_chan_add: iso 0x20001180 chan 0x20001dfc<0x1b>[0m
[21:48:02:441] [00:00:00.513,885] <0x1b>[0m<dbg> bt_hci_core: bt_hci_cmd_create: opcode 0x2068 param_len 31<0x1b>[0m
[21:48:02:441] [00:00:00.513,916] <0x1b>[0m<dbg> bt_hci_core: bt_hci_cmd_create: buf 0x20006514<0x1b>[0m
[21:48:02:441] [00:00:00.513,946] <0x1b>[0m<dbg> bt_hci_core: bt_hci_cmd_send_sync: buf 0x20006514 opcode 0x2068 len 34<0x1b>[0m
[21:48:02:441] [00:00:00.513,977] <0x1b>[0m<dbg> bt_hci_core: process_events: count 2<0x1b>[0m
[21:48:02:441] [00:00:00.513,977] <0x1b>[0m<dbg> bt_hci_core: process_events: ev->state 4<0x1b>[0m
[21:48:02:441] [00:00:00.514,007] <0x1b>[0m<dbg> bt_hci_core: send_cmd: calling net_buf_get<0x1b>[0m
[21:48:02:441] [00:00:00.514,007] <0x1b>[0m<dbg> bt_hci_core: send_cmd: calling sem_take_wait<0x1b>[0m
[21:48:02:441] [00:00:00.514,038] <0x1b>[0m<dbg> bt_hci_core: send_cmd: Sending command 0x2068 (buf 0x20006514) to driver<0x1b>[0m
[21:48:02:441] [00:00:00.514,038] <0x1b>[0m<dbg> bt_hci_core: bt_send: buf 0x20006514 len 34 type 0<0x1b>[0m
[21:48:02:441] [00:00:00.514,068] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_send: buf 0x20006514 type 0 len 34<0x1b>[0m
[21:48:02:441] [00:00:00.514,068] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_send: Final HCI buffer:
[21:48:02:441] 01 68 20 1f 00 00 01 10 27 00 28 00 0a 00 02 02 |.h ..... '.(.....
[21:48:02:441] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |........ ........
[21:48:02:441] 00 00 00 |... <0x1b>[0m
[21:48:02:441] [00:00:00.514,129] <0x1b>[0m<dbg> bt_hci_core: process_events: ev->state 0<0x1b>[0m
[21:48:02:441] [00:00:00.514,129] <0x1b>[0m<dbg> bt_conn: bt_conn_prepare_events: <0x1b>[0m
[21:48:02:441] [00:00:00.514,160] <0x1b>[0m<dbg> bt_hci_core: hci_tx_thread: Calling k_poll with 2 events<0x1b>[0m
[21:48:02:441] [00:00:00.514,953] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_rx: RPMsg data:
[21:48:02:441] 04 0f 04 01 01 68 20 |.....h <0x1b>[0m
[21:48:02:441] [00:00:00.514,984] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_evt_recv: len 4<0x1b>[0m
[21:48:02:441] [00:00:00.514,984] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_rx: Calling bt_recv(0x20006514)<0x1b>[0m
[21:48:02:441] [00:00:00.515,014] <0x1b>[0m<dbg> bt_hci_core: bt_recv: buf 0x20006514 len 6<0x1b>[0m
[21:48:02:441] [00:00:00.515,014] <0x1b>[0m<dbg> bt_hci_core: hci_cmd_status: opcode 0x2068<0x1b>[0m
[21:48:02:441] [00:00:00.515,045] <0x1b>[0m<dbg> bt_hci_core: hci_cmd_done: opcode 0x2068 status 0x01 buf 0x20006514<0x1b>[0m
[21:48:02:441] [00:00:00.515,075] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_rx: RX buf payload:<0x1b>[0m
[21:48:02:441] [00:00:00.515,106] <0x1b>[1;33m<wrn> bt_hci_core: opcode 0x2068 status 0x01<0x1b>[0m
[21:48:02:441] [00:00:00.515,136] <0x1b>[0m<dbg> bt_iso: bt_iso_big_create: Could not create BIG -5<0x1b>[0m
[21:48:02:441] [00:00:00.515,136] <0x1b>[0m<dbg> bt_conn: bt_conn_unref: handle 0 ref 1 -> 0<0x1b>[0m
[21:48:02:441] [00:00:00.515,167] <0x1b>[0m<dbg> bt_audio_broadcast_source: bt_audio_broadcast_source_start: Failed to create BIG: -5<0x1b>[0m

thanks

RE: get error message when running exsample project on nrf5340DK

Zhongsan — Tue, 02 Aug 2022 13:44:32 GMT

Hi, Martin

after adding

CONFIG_BT_EXT_ADV=y

to:

samples/bluetooth/hci_rpmsg/prj.conf

i got following message:

[21:42:01:031] *** Booting Zephyr OS build v3.0.99-ncs1-2479-g78f2648f85e9 ***␍␊
[21:42:01:031] [00:00:00.455,810] <0x1b>[0m<dbg> bt_hci_core: bt_hci_driver_regist*** Booting Zephyr OS build v3.0.99-ncs1-2479-g78f2648f85e9 ***␍␊
[21:42:19:866] [00:00:00.251,373] <0x1b>[0m<dbg> bt_hci_core: bt_hci_driver_register: Registered RPMsg<0x1b>[0m␍␊
[21:42:19:883] <0x1b>[1;31m--- 240 messages dropped ---␍␊
[21:42:19:889] <0x1b>[0mBluetooth initialized␍␊
[21:42:22:419] Creating broadcast source␍␊
[21:42:25:100] [00:00:13.808,Unable to create broadcast source: -134␍␊
[21:42:25:109] 441] <0x1b>[0m<dbg> bt_conn: bt_conn_prepare_events: <0x1b>[0m␍␊
[21:42:25:112] <0x1b>[1;31m--- 199 messages dropped ---␍␊
[21:42:25:115] <0x1b>[0m[00:00:19.021,972] <0x1b>[0m<dbg> bt_hci_core: bt_hci_cmd_send_sync: rsp 0x20006514 opcode 0x2036 len 2<0x1b>[0m␍␊
[21:42:25:125] [00:00:19.022,094] <0x1b>[0m<dbg> bt_id: bt_id_set_adv_random_addr: 21:27:DC:23:BC:D4<0x1b>[0m␍␊
[21:42:25:131] [00:00:19.022,125] <0x1b>[0m<dbg> bt_hci_core: bt_hci_cmd_create: opcode 0x2035 param_len 7<0x1b>[0m␍␊
[21:42:25:140] [00:00:19.022,155] <0x1b>[0m<dbg> bt_hci_core: bt_hci_cmd_create: buf 0x20006514<0x1b>[0m␍␊
[21:42:25:147] [00:00:19.022,155] <0x1b>[0m<dbg> bt_hci_core: bt_hci_cmd_send_sync: buf 0x20006514 opcode 0x2035 len 10<0x1b>[0m␍␊
[21:42:25:156] [00:00:19.022,186] <0x1b>[0m<dbg> bt_hci_core: process_events: count 2<0x1b>[0m␍␊
[21:42:25:162] [00:00:19.022,216] <0x1b>[0m<dbg> bt_hci_core: process_events: ev->state 4<0x1b>[0m␍␊
[21:42:25:168] [00:00:19.022,216] <0x1b>[0m<dbg> bt_hci_core: send_cmd: calling net_buf_get<0x1b>[0m␍␊
[21:42:25:175] [00:00:19.022,216] <0x1b>[0m<dbg> bt_hci_core: send_cmd: calling sem_take_wait<0x1b>[0m␍␊
[21:42:25:184] [00:00:19.022,247] <0x1b>[0m<dbg> bt_hci_core: send_cmd: Sending command 0x2035 (buf 0x20006514) to driver<0x1b>[0m␍␊
[21:42:25:191] [00:00:19.022,247] <0x1b>[0m<dbg> bt_hci_core: bt_send: buf 0x20006514 len 10 type 0<0x1b>[0m␍␊
[21:42:25:197] [00:00:19.022,277] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_send: buf 0x20006514 type 0 len 10<0x1b>[0m␍␊
[21:42:25:205] [00:00:19.022,308] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_send: Final HCI buffer:␍␊
[21:42:25:214] 01 35 20 07 00 d4 bc 23 dc 27 21 |.5 ....# .'! <0x1b>[0m␍␊
[21:42:25:224] [00:00:19.022,338] <0x1b>[0m<dbg> bt_hci_core: process_events: ev->state 0<0x1b>[0m␍␊
[21:42:25:230] [00:00:19.022,369] <0x1b>[0m<dbg> bt_conn: bt_conn_prepare_events: <0x1b>[0m␍␊
[21:42:25:235] [00:00:19.022,369] <0x1b>[0m<dbg> bt_hci_core: hci_tx_thread: Calling k_poll with 2 events<0x1b>[0m␍␊
[21:42:25:243] [00:00:19.022,949] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_rx: RPMsg data:␍␊
[21:42:25:249] 04 0e 04 01 35 20 00 |....5 . <0x1b>[0m␍␊
[21:42:25:261] [00:00:19.022,949] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_evt_recv: len 4<0x1b>[0m␍␊
[21:42:25:267] [00:00:19.022,979] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_rx: Calling bt_recv(0x20006514)<0x1b>[0m␍␊
[21:42:25:276] [00:00:19.022,979] <0x1b>[0m<dbg> bt_hci_core: bt_recv: buf 0x20006514 len 6<0x1b>[0m␍␊
[21:42:25:280] [00:00:19.023,010] <0x1b>[0m<dbg> bt_hci_core: hci_cmd_complete: opcode 0x2035<0x1b>[0m␍␊
[21:42:25:287] [00:00:19.023,010] <0x1b>[0m<dbg> bt_hci_core: hci_cmd_done: opcode 0x2035 status 0x00 buf 0x20006514<0x1b>[0m␍␊
[21:42:25:295] [00:00:19.023,071] <0x1b>[0m<dbg> bt_hci_driver: bt_rpmsg_rx: RX buf payload:␍␊
[21:42:25:302] 00 |. <0x1b>[0m␍␊
[21:42:25:313] [00:00:19.023,101] <0x1b>[0m<dbg> bt_hci_core: bt_hci_cmd_send_sync: rsp 0x20006514 opcode 0x2035 len 1<0x1b>[0m␍␊
[21:42:25:322] [00:00:19.023,132] <0x1b>[0m<dbg> bt_audio_broadcast_source: bt_audio_broadcast_source_create: Failed to set periodic advertising parameters (err -134)<0x1b>[0m␍␊

so, i think there is other issues

thanks

RE: get error message when running exsample project on nrf5340DK

Zhongsan — Tue, 02 Aug 2022 09:55:11 GMT

Hi, Martin

ok, i will try it

thanks

RE: get error message when running exsample project on nrf5340DK

Martin Tverdal — Tue, 02 Aug 2022 09:44:29 GMT

I had the same issue myself just now (but for another sample application), for me what solved it was adding:

CONFIG_BT_EXT_ADV=y

to:

samples/bluetooth/hci_rpmsg/prj.conf

Im not able to see from your log if it will solve it for you though. but you can give it a try.