Increase nrf5340 NUS sending data speed

RE: Increase nrf5340 NUS sending data speed

Joakim Jakobsen — Thu, 27 Oct 2022 09:55:48 GMT

Thanks.

Let me know if you have any further questions.

Br,
Joakim

RE: Increase nrf5340 NUS sending data speed

allenboon — Thu, 27 Oct 2022 09:35:44 GMT

Hi Joakim,

I have tested another slide shared code that make a good result (Both have peripheral and central code). The test throughput can achieve 1300kbps.

nRF Connect SDK NUS throughput modifications and issues for peripheral_uart/central_uart example applications

But it only can build on v1.8.0 or less version.

So, I tried to copy code and configuration to v2.1.0 NUS sample code.

It still make same result as I mentioned (only 7kbps). I do not know why this condition happened.

If there are no other advise, I think I will use this code base to completed my project.

Many Thanks.

Allen

RE: Increase nrf5340 NUS sending data speed

Joakim Jakobsen — Thu, 27 Oct 2022 09:03:51 GMT

Thanks.

Configuration looks good.

Did you test the example that Vidar linked to? As you can see from the ticket you linked, they were able to achieve around 1000kbps.

Br,
Joakim

RE: Increase nrf5340 NUS sending data speed

allenboon — Tue, 25 Oct 2022 07:02:15 GMT

Hello Joakim,

I have referenced BLE throughput sample and below Q&A

https://devzone.nordicsemi.com/f/nordic-q-a/84487/ble-uart-nus-altering-mtu-and-faster-interval

https://devzone.nordicsemi.com/f/nordic-q-a/86786/nrf5340-max-throughput

Now, I can set MTU size = 247bytes, PHY data rate = 2M/S and connection interval = 400ms.

Then, I change send data array length to 244 bytes and print the receive data on nRF 52840 dongle UART log.

The testing result is 52840 dongle will get one packet data(244bytes) per 250ms.

Is this result correct? or there are some other improvement method?

Below is my prj.conf setting

nrf5340:

#
# Copyright (c) 2018 Nordic Semiconductor
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

# Enable the UART driver
CONFIG_UART_ASYNC_API=y
CONFIG_NRFX_UARTE0=y
CONFIG_SERIAL=y

CONFIG_GPIO=y

# Make sure printk is printing to the UART console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_HEAP_MEM_POOL_SIZE=2048

CONFIG_BT=y
CONFIG_BT_PERIPHERAL=y
CONFIG_BT_DEVICE_NAME="Nordic_UART_Service"
CONFIG_BT_DEVICE_APPEARANCE=833
CONFIG_BT_MAX_CONN=1
CONFIG_BT_MAX_PAIRED=1

# Enable the NUS service
CONFIG_BT_NUS=y

# Enable bonding
CONFIG_BT_SETTINGS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y
CONFIG_NVS=y
CONFIG_SETTINGS=y

# Enable DK LED and Buttons library
CONFIG_DK_LIBRARY=y

# This example requires more workqueue stack
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048

# Config logger
CONFIG_LOG=y
CONFIG_USE_SEGGER_RTT=y
CONFIG_LOG_BACKEND_RTT=n
CONFIG_LOG_BACKEND_UART=y

CONFIG_ASSERT=y

CONFIG_BT_NUS_UART_BUFFER_SIZE=247
#CONFIG_BT_NUS_UART_RX_WAIT_TIME=20

CONFIG_BT_BUF_ACL_RX_SIZE=502
#CONFIG_BT_GATT_CLIENT=y
CONFIG_BT_ATT_PREPARE_COUNT=2
CONFIG_BT_CONN_TX_MAX=10
CONFIG_BT_L2CAP_TX_BUF_COUNT=10
CONFIG_BT_L2CAP_TX_MTU=498
CONFIG_BT_L2CAP_DYNAMIC_CHANNEL=y
CONFIG_BT_CTLR_PHY_2M=y
CONFIG_BT_CTLR_RX_BUFFERS=2
CONFIG_BT_BUF_ACL_TX_COUNT=10
CONFIG_BT_BUF_ACL_TX_SIZE=502
CONFIG_BT_CTLR_DATA_LENGTH_MAX=251
CONFIG_BT_USER_DATA_LEN_UPDATE=y

nrf52840 dongle:

#
# Copyright (c) 2018 Nordic Semiconductor
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

# Enable the UART driver
CONFIG_UART_ASYNC_API=y
CONFIG_NRFX_UARTE0=y
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# Enable the BLE stack with GATT Client configuration
CONFIG_BT=y
CONFIG_BT_CENTRAL=y
CONFIG_BT_SMP=y
CONFIG_BT_GATT_CLIENT=y

# Enable the BLE modules from NCS
CONFIG_BT_NUS_CLIENT=y
CONFIG_BT_SCAN=y
CONFIG_BT_SCAN_FILTER_ENABLE=y
CONFIG_BT_SCAN_UUID_CNT=1
CONFIG_BT_GATT_DM=y
CONFIG_HEAP_MEM_POOL_SIZE=2048

# This example requires more workqueue stack
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048

# Enable bonding
CONFIG_BT_SETTINGS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y
CONFIG_NVS=y
CONFIG_SETTINGS=y

# Config logger
CONFIG_LOG=y
CONFIG_USE_SEGGER_RTT=y
CONFIG_LOG_BACKEND_RTT=y
CONFIG_LOG_BACKEND_UART=n

CONFIG_ASSERT=y

CONFIG_BT_BUF_ACL_RX_SIZE=502
CONFIG_BT_ATT_PREPARE_COUNT=2
CONFIG_BT_CONN_TX_MAX=10
CONFIG_BT_L2CAP_TX_BUF_COUNT=10
CONFIG_BT_L2CAP_TX_MTU=498
CONFIG_BT_BUF_ACL_TX_SIZE=502
CONFIG_BT_L2CAP_DYNAMIC_CHANNEL=y
CONFIG_BT_CTLR_PHY_2M=y

CONFIG_BT_USER_DATA_LEN_UPDATE=y
CONFIG_BT_USER_PHY_UPDATE=y
CONFIG_BT_GAP_AUTO_UPDATE_CONN_PARAMS=n

In the other hand, I find document is about throughput maximum on nRF52.

Is this test result is as same as nRF5340?

https://infocenter.nordicsemi.com/index.jsp?topic=%2Fsds_s140%2FSDS%2Fs1xx%2Fble_data_throughput%2Fble_data_throughput.html

Waiting for you suggestions.

Many Thanks

Allen

RE: Increase nrf5340 NUS sending data speed

Joakim Jakobsen — Mon, 24 Oct 2022 08:08:09 GMT

Thanks.

You could also try to increase the transmit buffer. That could help improve the throughput.

I would suggest that you take a look at our throughput example in the SDK. This could give you some good advice on how to increase the throughput for your application.

Br,
Joakim

RE: Increase nrf5340 NUS sending data speed

allenboon — Thu, 20 Oct 2022 08:45:39 GMT

Hi Joakim,

Thanks for your reply.

I guess you mean central_uart (nrf52840 dongle) connection interval?

On central_uart sample code do not have define connection interval (maybe I do not know where to change)?

So, I add below code to change connection interval.(min 7.5ms, max 30ms)

static const struct bt_le_conn_param conn_params = BT_LE_CONN_PARAM_INIT(
	7.5, 30, 10, 400);

static int scan_init(void)
{
	int err;
	struct bt_scan_init_param scan_init = {
		.scan_param = NULL,
		.conn_param = &conn_params,
		.connect_if_match = 1,

	};

	bt_scan_init(&scan_init);
	bt_scan_cb_register(&scan_cb);

	err = bt_scan_filter_add(BT_SCAN_FILTER_TYPE_UUID, BT_UUID_NUS_SERVICE);
	if (err) {
		LOG_ERR("Scanning filters cannot be set (err %d)", err);
		return err;
	}

	err = bt_scan_filter_enable(BT_SCAN_UUID_FILTER, false);
	if (err) {
		LOG_ERR("Filters cannot be turned on (err %d)", err);
		return err;
	}

	LOG_INF("Scan module initialized");
	return err;
}

Then, the transfer speed still 50ms.

Allen

Thanks

RE: Increase nrf5340 NUS sending data speed

Joakim Jakobsen — Thu, 20 Oct 2022 08:27:37 GMT

Hi!

What is your connection interval defined as?

Maybe you could try to decrease the connection interval? So that you can send data more often.

Br,
Joakim