nRF5349 PCA10121 Build Question

RE: nRF5349 PCA10121 Build Question

gfgf2400a — Mon, 31 Oct 2022 15:30:15 GMT

After programming ncs\v2.1.1\nrf\applications\nrf5340_audio\bin\ble5-ctr-rpmsg_3303.hex, the application core is good now. I am good.

** Booting Zephyr OS build v3.1.99-ncs1 ***
HL [00:00:00.341,308] <inf> audio_sync_timer: Audio sync timer initialized
HL [00:00:00.342,010] <dbg> nrf5340_audio_dk_nrf5340_cpuapp: core_config: Setting gpiote latency to low power
HL [00:00:00.342,071] <dbg> nrf5340_audio_dk_nrf5340_cpuapp: remoteproc_mgr_boot: Network MCU released.
HL [00:00:00.346,771] <inf> fw_info:
nRF5340 Audio nRF5340 Audio DK cpuapp
NCS Version: 2.1.1
Cmake run : Mon Oct 31 10:23:24 2022
HL [00:00:00.346,771] <inf> fw_info: ------- DEBUG BUILD -------
HL [00:00:00.346,771] <inf> fw_info:
HEADSET <no ch selected> defaulting to AUDIO_CH_L
HL [00:00:00.346,771] <inf> fw_info:
HEADSET left device
HL [00:00:00.357,391] <inf> board_version: Compatible board/HW version found: 1.0.0
*** Booting Zephyr OS build v3.1.99-ncs1 ***
HL [00:00:00.290,069] <inf> audio_sync_timer: Audio sync timer initialized
HL [00:00:00.290,802] <dbg> nrf5340_audio_dk_nrf5340_cpuapp: core_config: Setting gpiote latency to low power
HL [00:00:00.290,863] <dbg> nrf5340_audio_dk_nrf5340_cpuapp: remoteproc_mgr_boot: Network MCU released.
HL [00:00:08.003,631] <inf> fw_info:
nRF5340 Audio nRF5340 Audio DK cpuapp
NCS Version: 2.1.1
Cmake run : Mon Oct 31 10:23:24 2022
HL [00:00:08.003,631] <inf> fw_info: ------- DEBUG BUILD -------
HL [00:00:08.003,631] <inf> fw_info:
HEADSET <no ch selected> defaulting to AUDIO_CH_L
HL [00:00:08.003,662] <inf> fw_info:
HEADSET left device
HL [00:00:08.014,251] <inf> board_version: Compatible board/HW version found: 1.0.0
HL [00:00:10.048,461] <wrn> ble: Failed to create ID
HL [00:00:10.051,757] <inf> fs_nvs: 6 Sectors of 4096 bytes
HL [00:00:10.051,757] <inf> fs_nvs: alloc wra: 0, fe8
HL [00:00:10.051,757] <inf> fs_nvs: data wra: 0, 0
HL [00:00:10.061,676] <wrn> bt_hci_core: Controller to host flow control not supported
HL [00:00:10.064,575] <inf> bt_hci_core: No ID address. App must call settings_load()
HL [00:00:10.064,636] <inf> ble: MAC: 00:00:00:00:00:00 (public)
HL [00:00:10.065,185] <inf> ble: Controller version: 3303
HL [00:00:10.067,901] <inf> bt_settings: Saving ID
HL [00:00:10.190,643] <inf> cis_headset: Regular advertising started

RE: nRF5349 PCA10121 Build Question

gfgf2400a — Mon, 31 Oct 2022 15:13:39 GMT

From reading, my guess at this point is there is a precompiled network core for nRF5340 audio DK. Would ncs\v2.1.1\nrf\applications\nrf5340_audio\bin\ble5-ctr-rpmsg_3303.hex the correct one to program?

RE: nRF5349 PCA10121 Build Question

gfgf2400a — Mon, 31 Oct 2022 14:41:02 GMT

Executing task in folder nRF5340: west build -d c:\Projects\nRF5340\application\nrf5340_audio_net\build -t guiconfig

-- west build: generating a build system
Loading Zephyr default modules (Zephyr base (cached)).
-- Application: C:/Projects/nRF5340/application/nrf5340_audio_net
-- Cache files will be written to: C:/ncs/v2.1.1/zephyr/.cache
-- Zephyr version: 3.1.99 (C:/ncs/v2.1.1/zephyr)
-- Found west (found suitable version "0.14.0", minimum required is "0.7.1")
-- Board: nrf5340_audio_dk_nrf5340_cpunet
-- Found host-tools: zephyr 0.14.1 (C:/ncs/toolchains/v2.1.1/opt/zephyr-sdk)
-- Found dtc: C:/ncs/toolchains/v2.1.1/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found toolchain: zephyr 0.14.1 (C:/ncs/toolchains/v2.1.1/opt/zephyr-sdk)
-- Found BOARD.dts: C:/ncs/v2.1.1/nrf/boards/arm/nrf5340_audio_dk_nrf5340/nrf5340_audio_dk_nrf5340_cpunet.dts
-- Generated zephyr.dts: C:/Projects/nRF5340/application/nrf5340_audio_net/build/zephyr/zephyr.dts
-- Generated devicetree_unfixed.h: C:/Projects/nRF5340/application/nrf5340_audio_net/build/zephyr/include/generated/devicetree_unfixed.h
-- Generated device_extern.h: C:/Projects/nRF5340/application/nrf5340_audio_net/build/zephyr/include/generated/device_extern.h
-- Including generated dts.cmake file: C:/Projects/nRF5340/application/nrf5340_audio_net/build/zephyr/dts.cmake

warning: NEWLIB_LIBC_FLOAT_PRINTF (defined at lib/libc/Kconfig:124) was assigned the value 'y' but
got the value 'n'. Check these unsatisfied dependencies: NEWLIB_LIBC (=n). See
docs.zephyrproject.org/.../kconfig.html and/or look up
NEWLIB_LIBC_FLOAT_PRINTF in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.

warning: The choice symbol USB_DRIVER_LOG_LEVEL_ERR (defined at
subsys/logging/Kconfig.template.log_config:11) was selected (set =y), but no symbol ended up as the
choice selection. See
docs.zephyrproject.org/.../kconfig.html and/or look up
USB_DRIVER_LOG_LEVEL_ERR in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.

warning: The choiParsing C:/Projects/nRF5340/application/nrf5340_audio_net/Kconfig
Loaded configuration 'C:/ncs/v2.1.1/nrf/boards/arm/nrf5340_audio_dk_nrf5340/nrf5340_audio_dk_nrf5340_cpunet_defconfig'
Merged configuration 'C:/Projects/nRF5340/application/nrf5340_audio_net/prj.conf'
Merged configuration 'C:/Projects/nRF5340/application/nrf5340_audio_net/build/zephyr/misc/generated/extra_kconfig_options.conf'
ce symbol USB_DEVICE_LOG_LEVEL_ERR (defined at
subsys/logging/Kconfig.template.log_config:11) was selected (set =y), but no symbol ended up as the
choice selection. See
docs.zephyrproject.org/.../kconfig.html and/or look up
USB_DEVICE_LOG_LEVEL_ERR in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.

warning: The choice symbol SD_LOG_LEVEL_OFF (defined at
subsys/logging/Kconfig.template.log_config:8) was selected (set =y), but no symbol ended up as the
choice selection. See docs.zephyrproject.org/.../kconfig.html
and/or look up SD_LOG_LEVEL_OFF in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.

warning: Experimental symbol NRF5340_AUDIO is enabled.

warning: Experimental symbol BT_AUDIO is enabled.

warning: Experimental symbol BT_AUDIO_UNICAST_SERVER is enabled.

warning: Experimental symbol BT_VCS is enabled.

warning: BT_ISO_PERIPHERAL (defined at subsys/bluetooth\Kconfig.iso:19) has direct dependencies (!BT_CTLR || BT_CTLR_PERIPHERAL_ISO_SUPPORT) && BT_HCI && BT with value n, but is currently being y-selected by the following symbols:
- BT_AUDIO_UNICAST_SERVER (defined at C:/Projects/nRF5340/application/nrf5340_audio_net\src/bluetooth\Kconfig.defaults:95, C:/ncs/v2.1.1/zephyr/subsys/bluetooth/host\../audio\Kconfig.baps:15, subsys/bluetooth\host\../audio\Kconfig.baps:15), with value y, direct dependenc
ies (AUDIO_DEV = 1 && TRANSPORT_CIS && NRF5340_AUDIO) || (BT_AUDIO && BT_HCI_HOST && BT_RPC_STACK) || (BT_AUDIO && BT_HCI_HOST && BT_HCI && BT) (value: y), and select condition BT_AUDIO && BT_HCI_HOST && BT_HCI && BT (value: y)

warning: SW_CODEC_LC3_T2_SOFTWARE (defined at C:/ncs/v2.1.1/nrfxlib\lc3/Kconfig:43) has direct dependencies FP_HARDABI with value n, but is currently being y-selected by the following symbols:
- SW_CODEC_LC3 (defined at C:/Projects/nRF5340/application/nrf5340_audio_net\src/audio/Kconfig:137), with value y, direct dependencies <choice SW_CODEC_DEFAULT> (value: y), and select condition <choice SW_CODEC_DEFAULT> (value: y)

error: Aborting due to Kconfig warnings

CMake Error at C:/ncs/v2.1.1/zephyr/cmake/modules/kconfig.cmake:293 (message):
command failed with return code: 1
Call Stack (most recent call first):
C:/ncs/v2.1.1/zephyr/cmake/modules/zephyr_default.cmake:121 (include)
C:/ncs/v2.1.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
C:/ncs/v2.1.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
CMakeLists.txt:37 (find_package)

-- Configuring incomplete, errors occurred!
FATAL ERROR: command exited with status 1: 'c:\ncs\toolchains\v2.1.1\opt\bin\cmake.EXE' '-DWEST_PYTHON=c:\ncs\toolchains\v2.1.1\opt\bin\python.exe' '-Bc:\Projects\nRF5340\application\nrf5340_audio_net\build' -GNinja '-SC:\Projects\nRF5340\application\nrf5340_audio_net'

* The terminal process "cmd /d /c west build -d c:\Projects\nRF5340\application\nrf5340_audio_net\build -t guiconfig" terminated with exit code: 1.
* Terminal will be reused by tasks, press any key to close it.

RE: nRF5349 PCA10121 Build Question

gfgf2400a — Mon, 31 Oct 2022 14:37:02 GMT

I foudn https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/app_boards.html

PCA10095 is for older nrf5340dk_nrf5340 that has has target for

nrf5340dk_nrf5340_cpunet

nrf5340dk_nrf5340_cpuapp

nrf5340dk_nrf5340_cpuapp_ns

PCA10121 is for nrf5340_audio_dk_nrf5340 but it only has build target for nrf5340_audio_dk_nrf5340_cpuapp. When I build nrf5340_audio_dk_nrf5340_cpunet, I have many build errors?

RE: nRF5349 PCA10121 Build Question

gfgf2400a — Fri, 28 Oct 2022 22:01:26 GMT

Typo on title "nRF5349 PCA10121 Build Question", nRF5349 should be nRF5340.

RE: nRF5349 PCA10121 Build Question

gfgf2400a — Fri, 28 Oct 2022 15:43:07 GMT

"On the other hand, https://developer.nordicsemi.com/nRF_Connect_SDK/doc/2.1.1/nrf/applications/nrf5340_audio/README.html mentioned about PCA10121 but there is only build instructions by using scripts and command line only."

I would like to use Visual Studio Code instead of using scripts and command line.