Upgrading to SoftDevice 7.3.0 from 6.1.1 issue

RE: Upgrading to SoftDevice 7.3.0 from 6.1.1 issue

Vahidreza — Sun, 18 Dec 2022 13:21:01 GMT

This RAM allocation solved the issue:

RE: Upgrading to SoftDevice 7.3.0 from 6.1.1 issue

Vahidreza — Thu, 15 Dec 2022 19:18:35 GMT

Thanks for your suggestion but I do not need to upgrade using DFU!

I am programming the DK board using nrfConnect Programmer and HEX files. When I program the board with Softdevice S140 6.1.1 it works fine but when I reallocate the RAM, replace the header files in components/sofdevice/s140/headers directory, and change the preprocessor definition NRF_SD_BLE_API_VERSION value from 6 to 7 and build a new HEX file and program the DK board with it along with S140 7.3.0 HEX file nothing works at all. I even tried building the HEX file in DEBUG mode to check the logs but no log is printed...!

There might be something that I need to do and I don't know what. This is the main question:
Is there any sort of configuration that must take place for upgrading from S140 6.1.1 to S140 7.3.0?!
Do I need to add a preprocessor?

RE: Upgrading to SoftDevice 7.3.0 from 6.1.1 issue

Priyanka — Tue, 13 Dec 2022 09:57:12 GMT

Hi,

Could you attach any log output that you get from nrf_log? It could be that you need to allocate more RAM to the SoftDevice.

Also, in order to upgrade the SoftDevice, you can try using the the DFU (Device Firmware Update): https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.1.0/examples_bootloader.html?cp=8_1_4_4

Please take a look at the example given in the link mentioned.

-Priyanka

RE: Upgrading to SoftDevice 7.3.0 from 6.1.1 issue

Vahidreza — Mon, 12 Dec 2022 08:32:21 GMT

No. The project is a modified SDK example. I build it using IAR and programm the DK using nrfConnect programmer.

RE: Upgrading to SoftDevice 7.3.0 from 6.1.1 issue

Priyanka — Mon, 12 Dec 2022 08:19:13 GMT

Hi,

Did you say that you are using the nRF Connect SDK for programming your DK?

Best Regards,

Priyanka