Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Kazi Afroza Sultana — Mon, 06 Feb 2023 14:28:36 GMT

Glad to hear that.

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Jacek Majda — Sun, 05 Feb 2023 12:07:03 GMT

Hi,

A few days ago I noticed that there was a new version of nRF Connect SDK available for installation, namely: nRF Connect SDK v2.2.99-dev3.

Once i installed the "nRF Connect SDK v2.2.99-dev3" version of nRF Connect SDK on my PC, the problems that I was experiencing for the last couple of weeks disappeared.

So the problem seems to be resolved.

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Kazi Afroza Sultana — Tue, 31 Jan 2023 15:45:22 GMT

Hello,

Please insert the error information here as code not in word documents. It is difficult to read the screenshot from word document.

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Jacek Majda — Fri, 27 Jan 2023 15:37:44 GMT

Hello Kazi,

As advised by you, I tried today to build the "Blinky" sample using west command: "west build" , but without success.

The following error messages showed up:

"Fatal Error, Errors occurred! ModuleNotFoundError: No module named 'jinja2'. CMake Error at: tools/CmakeLists.txt:161 (message):File generation failed" I attach the screenshot of these errors in the file: West Build Error - 27-January-2023.

I then did west update from nRF Connect on the VS Code terminal, as advised. I attach a file: "West Update from nRF Connect -27-January-2023" that shows the final messages of that activity.

I then rebooted my PC and I tried to build a simple application/sample: "Blinky" for my nRF9160 DK , but unfortunately, the same errors as in the past came up, namely:

"Fatal Error: Zephyr/dt-bindings/adc/adc.h: no such file or directory.

7: #include <zephyr/dt-bindings/adc/adc.h>

compilation terminated".

I attach a screenshot of these errors in the file: Fatal Error 27-January_2023".

Am I the only person who is experiencing this problem?

devzone.nordicsemi.com/.../West-Build-Error-27_2D00_January_2D00_2023.docx

devzone.nordicsemi.com/.../West-Update-from-nRF-Connect-27_2D00_January_2D00_2023.docx

devzone.nordicsemi.com/.../Fatal-Error_2D00_27_2D00_January_2D00_2023.docx

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Kazi Afroza Sultana — Thu, 26 Jan 2023 08:31:55 GMT

Hello JM,

You can try to do west update from nRF Connet profile on the VS Code terminal. From there you can go to the SDK directory (parent directory of Zephyr and nrf) and write this command:

west update

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Kazi Afroza Sultana — Tue, 24 Jan 2023 12:54:41 GMT

Hello JM,

The reason I suggested to try to run the samples using west command to know if the problem occurs only for VScode. if there is no problem in west command then it could be an issue on VScode. You should try this.

However, I will report your issues to the VScode team.

Thanks.

Kazi

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Jacek Majda — Thu, 19 Jan 2023 17:15:56 GMT

Hello,

I have not tried to run the sample using west command from command line tool, as I do not use this approach to run the samples on my development kits.

My preferred approach to build and run samples on my DKs is to use the nRF Connect SDK v2.2.0 (or any other version of the nRF Connect SDK) - as I was successfully using this approach in the past year or so.

I just tried (unsuccessfully) to build yet another sample: "Central UART" for my nRF5340 DK, using the following build target: nRF5340dk_nRF5340_cpuapp_ns.

As usual, the build process was terminated with the same error messages as before. I attach a screenshot of the page with all error messages that showed up during the build process.

Among others, the following error messages highlighted in yellow seem to be important:

"FATAL ERROR: Zephyr/dt-bindings/adc/adc.h : No such file or directory".

7: #include <zephyr/dt-bindings/adc/adc.h>

Compilation terminated.

The same error messages have been shown on the screenshots of error messages dated: 16-January-2023 and 13-January-2023 that I sent you already.

Upon investigation, I found that indeed there is no such subdirectory as: dt-bindings/adc in the directory : v2.2.0>zephyr on my PC, that was created (on my PC) when I installed/reinstalled the nRF Connect SDK v2.2.0.

However, I found that the adc folder can be found on my PC under: v2.2.0>zephyr>dts>bindings>adc , as shown on the attached screenshot_2.

However, I can not see the required adc.h file in that adc directory.

Is it a bug of the nRF Connect SDK v2.2.0?

If so, how can it be fixed to allow the developers to build and run the samples like: Blinky, Bluetooth:Peripheral HR and "Central UART" for the nRF5340 DK development kit using the nRF Connect SDK v2.2.0 ?

Regards,

devzone.nordicsemi.com/.../Error-Messages-_2D00_-19_2D00_January_2D00_2023.docx

devzone.nordicsemi.com/.../Screenshot_5F00_2-_2D00_19_2D00_January_2D00_2023.docx

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Kazi Afroza Sultana — Thu, 19 Jan 2023 12:00:07 GMT

Hello,

Have you tried to run the sample using west command from command line tool?

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Jacek Majda — Mon, 16 Jan 2023 16:09:20 GMT

Yes, I am getting the same errors when I try the nrf5340dk_nrf5340_cpuapp , as build target.

I then tried to build a simple sample: "Blinky" for the build target nrf5340dk_nrf5340_cpuapps_ns , but again unsuccessfully! The error messages that showed up during the build process of the sample" "Blinky" are shown on the attached screenshot.

As I said earlier, I did reinstall NCS v2.2.0 as advised by you, but how can I know if all required files were downloaded and installed successfully on my PC, as a result of my reinstallation of SDK v2.2.0 ?

devzone.nordicsemi.com/.../Error-messages-16_2D00_January_2D00_2023.docx

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Kazi Afroza Sultana — Mon, 16 Jan 2023 13:07:00 GMT

Peripheral_HR is built for nrf5340dk_nrf5340_cpuapp_ns or nrf5340dk_nrf5340_cpuapp.

So, your build target is ok. You also get the same error if you try the nrf5340dk_nrf5340_cpuapp as build target?

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Jacek Majda — Fri, 13 Jan 2023 14:48:50 GMT

Hello,

As advised, I have reinstalled the NCS v2.2.0 and I tried to build an application for the sample: Bluetooth: Peripheral HR , that can be found under: samples/bluetooth/peripheral_HR , in the Zephyr Tree , using the following build target: nrf5340dk_nrf5340_cpuapp_ns , for my board: nrf5340dk_nrf5340.

However, the build process was terminated again with the following error messages:

"Configuring incomplete, errors occurred! FATAL ERROR: command exited with status 1."

I attach a screenshot of the page with all error messages that showed up during the build process.

How can this problem be overcome?

Am I using the correct build target for this sample?

Should I use one of the following build targets for this sample: nrf5340dk_nrf5340_cpuapp or nrf5340dk_nrf5340_cpunet or yet another build target for this sample?

Regards,

devzone.nordicsemi.com/.../Error-Messages-13-January-2023.docx

RE: Failure to build an application for the sample: Bluetooth: Peripheral HR for my board: nRF5340dk_nrf5340

Kazi Afroza Sultana — Wed, 11 Jan 2023 15:36:12 GMT

Hello,

Did you use toolchain manager during installation of NCS v2.2.0? You may try to reinstall this.

Thanks.

Best Regards,

Kazi Afroza Sultana