Coded PHY distance testing

RE: Coded PHY distance testing

sunmnengnan — Fri, 03 Feb 2023 10:30:43 GMT

Thank you. This is helpful.

I will change the test environment and test again

RE: Coded PHY distance testing

hmolesworth — Thu, 02 Feb 2023 01:59:31 GMT

Height above ground (GND plane) and side interference are relevant to range; open-air and direct-line-of-sight are meaningless without knowing the constraints (ground, walls, trees). Direct line-of-sight usually means open field (countryside, no sheep no trees). You might find these links useful:

www.fanstel.com/testreport

https://devzone.nordicsemi.com/f/nordic-q-a/66439/nrf52832-1-mbit-s-vs-nrf52811-coded-phy-range-improvement-10---expected-100/271865

RE: Coded PHY distance testing

sunmnengnan — Thu, 02 Feb 2023 01:41:17 GMT

What's the device's transmitter power level? 0dBm?
------All are 8dBm
How do you measure range? f.ex Maximum distance between transmitter and receiver in an open-air an direct-line-of-sight enviroment.

------I use my mobile phone（Samsung Galaxy S22 5G） and BLE gateway to measure distance，and the test results are similar.
Has the transmitter and receivers had their antennas tuned?
-----Yes，they had their antennas tuned

RE: Coded PHY distance testing

haakonsh — Mon, 30 Jan 2023 11:56:22 GMT

Hey mengnan sun,

[quote user=""]1. What is the reason why there is no difference in the broadcasting distance between the two encoding methods of these two beacons?[/quote]

I do not know, there are many variables affecting radio performance. We need to know more information about your devices and range measurement methodology:

What's the device's transmitter power level? 0dBm?
How do you measure range? f.ex Maximum distance between transmitter and receiver in an open-air an direct-line-of-sight enviroment.
Has the transmitter and receivers had their antennas tuned?

[quote user=""]2. In order to improve the broadcast distance of coded mode, how should we improve？[/quote]

Depending on your answer above I might recommend that we do a formal schematics and layout review of your design. Small errors in the design can have major impacts on the RF performance.

As for why Coded PHY does not give you better range, I'm afraid I can't answer that without ruling out issues in design or test methodology.

In general, Coded PHY will improve the receiver sensitivity, but any Coded PHY packet is more susceptable to intermittent RF noise due to its longer on-air time compared to standard 1mbps PHY.
The same is true for 1mbps PHY compared to 2mbps PHY.

BR,