RE: Thread CoAP Client with Joiner Role Active

Jørgen Holmefjord — Tue, 07 Feb 2023 16:11:33 GMT

See Logging in nRF Connect SDK. For the sniffer log, you can use the nRF Sniffer for 802.15.4 to capture this.

RE: Thread CoAP Client with Joiner Role Active

simon8 — Mon, 06 Feb 2023 16:45:23 GMT

Where i could find the logs?

RE: Thread CoAP Client with Joiner Role Active

Jørgen Holmefjord — Mon, 06 Feb 2023 16:12:42 GMT

Hi,

If you have enabled CONFIG_OPENTHREAD_JOINER_AUTOSTART, you should not need to call otJoinerStart manually in the application, this is handled by the library. However, note that this will only be started if no commissioned dataset is present. Have you erased the device before programming your application, to make sure no old dataset is stored in flash?

If the commissioning process succeeds, there is likely some other problem that is preventing the device from attaching to the network.

Can you provide logs from device, sniffer log from the commissioning process, and logs from commissioner on the Raspberry?

Best regards,
Jørgen