Power management modes.

RE: Power management modes.

Einarh — Wed, 08 Feb 2023 10:55:32 GMT

Please read your data sheet thoroughly.

Standby doze is implemented in smartBASIC, which is developed by Laird, and is not part of the nRF Connect SDK.

In NCS this would translate to System ON mode with the additional active modules specified in my previous reply.

RE: Power management modes.

jyoti yadav — Wed, 08 Feb 2023 10:46:01 GMT

Any example is present for this mode? How to enter in this mode and exit from this mode?

RE: Power management modes.

Einarh — Wed, 08 Feb 2023 10:42:53 GMT

From Power Consumption Note 2 in 4.1 Power Consumption:

BL653µ modules Standby Doze is 2.6 uA typical. When using smartBASIC firmware, Standby Doze is entered automatically (when a waitevent statement is encountered within a smartBASIC application script). In Standby Doze, all peripherals that are enabled stay on and may re-awaken the chip. Depending on active peripherals, current consumption ranges from 2.6 μA to 370 uA (when UART is ON). See individual peripherals current consumption data in the Peripheral Block Current Consumption section. smartBASIC firmware has functionality to detect GPIO change with no current consumption cost, it is possible to close the UART and get to the 2.6 uA current consumption regime and still be able to detect for incoming data and be woken up so that the UART can be re-opened at expense of losing that first character. The BL653µ Standby Doze current (at 25°C) consists of the below nRF52833 blocks:

nRF52 System ON IDLE current (no RAM retention) (1.1 uA) – This is the base current of the CPU
LFRC (0.7 uA) and RTC (0.1uA or near 0uA) running as well as 128k RAM retention (0.8 uA) – This adds to the total of 2.7 uA typical. The RAM retention is 20nA per 4k block, but this can vary to 30nA per 4k block which would make the total 2.55uA to 2.86uA.

RE: Power management modes.

jyoti yadav — Wed, 08 Feb 2023 10:02:50 GMT

devzone.nordicsemi.com/.../CS_2D00_DS_2D00_BL653u-v1_5F00_5.pdf

RE: Power management modes.

jyoti yadav — Wed, 08 Feb 2023 09:58:33 GMT

RE: Power management modes.

Einarh — Wed, 08 Feb 2023 09:53:51 GMT

So you're using the nRF52833:

https://infocenter.nordicsemi.com/index.jsp?topic=%2Fps_nrf52833%2Fkeyfeatures_html5.html&cp=5_1_0

Flexible power management
- 1.7 V to 5.5 V supply voltage range
- On-chip DC/DC and LDO regulators with automated low current modes
- Automated peripheral power management
- Fast wake-up using 64 MHz internal oscillator
- 0.6 µA at 3 V in System OFF mode, no RAM retention
- 1.5 µA at 3 V in System ON mode, no RAM retention, wake on RTC

All this should be demonstrated in the System Off demo.

[quote user="jyoti yadav"]the standby Doze mode which given in data sheet[/quote]

What do you mean by doze mode?

What data sheet are you referring to?

-Einar

RE: Power management modes.

jyoti yadav — Wed, 08 Feb 2023 05:59:51 GMT

I am using BL653 Liard.

RE: Power management modes.

Einarh — Tue, 07 Feb 2023 14:54:21 GMT

Please specify what chip you are using, otherwise I don't know what datasheet you're referring too.

RE: Power management modes.

jyoti yadav — Tue, 07 Feb 2023 14:25:35 GMT

could you please suggest example code for the standby Doze mode which given in data sheet, i can see there are different name in the example they are using could you clarify which mode is what as per data sheet?

RE: Power management modes.

Einarh — Tue, 07 Feb 2023 12:50:39 GMT

Hello

You'll probably want to have a look at this sample:

https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/samples/boards/nrf/system_off/README.html

[quote user=""]Which are the peripherals we can enable and disable in deep sleep mode[/quote]

That depends on what board you are using, but either way you'll find that kind of information here: https://infocenter.nordicsemi.com/index.jsp

Best regards,

Einar