nrF5340 SPI pins not working when BT enabled

RE: nrF5340 SPI pins not working when BT enabled

Chris Westerhoff — Mon, 27 Mar 2023 06:35:21 GMT

I realize my mistake when trying to reassign the network core pins. This other forum post helped me alot RE: Use UARTE0 on the nrf5340 network core . I did not put gpio_fwd in my application core overlay.

The spins lines worked as intended once i reassigned uart0 pins on the network core. This post can be closed.

RE: nrF5340 SPI pins not working when BT enabled

Chris Westerhoff — Mon, 27 Mar 2023 06:11:59 GMT

Hi thanks for the quick response, I realize I have made a typo in my previous posts, instead of MOSI the line is MISO on p0.10. I will attach some waveforms showing the logic, the mosi line will be 0x00 and the miso line expecting will be 0xff.
This is one where I have changed the MISO line (p0.10 to p0.5) and kept the cs line on p0.11

This is one where I have changed the cs line (p0.11 to p0.6) and kept the MISO line on p0.10

This is one where both are p0.10 and p0.11

As shown in the waveforms the line moved away from one of those two pins works. I would like it in my design to use p0.10 and 0.11 as my SPI lines. Upon my investigation it seems the uarte0 pins in the network core conflict with my spi setup would this cause an issue or would it be something else if so how would i go about changing those pin configurations.

RE: nrF5340 SPI pins not working when BT enabled

azwin — Mon, 27 Mar 2023 05:48:46 GMT

1) if you are getting results with other pin assignments you ahead with this .2) still you want to retain 0.10 and 0.11 . keep one of the pin of the 0.10 /0.11 and change the other . check if its working .

RE: nrF5340 SPI pins not working when BT enabled

Chris Westerhoff — Mon, 27 Mar 2023 05:41:57 GMT

I have checked if giving other pin assignment for the MOSI and CS lines and that indeed works but I would like to use pins 0.10 and 0.11 for those two SPI lines

RE: nrF5340 SPI pins not working when BT enabled

azwin — Mon, 27 Mar 2023 05:34:12 GMT

give other pin assignement for MOSI and CS pin and check if that works.