Installing OTBR manually (Raspberry Pi) on Ubuntu fails

RE: Installing OTBR manually (Raspberry Pi) on Ubuntu fails

Alex33 — Mon, 17 Apr 2023 09:57:27 GMT

Hi,

I have ~ 1GB RAM on the raspberry which was not enough for the build.

I added 1GB swap memory and I am now able to finish the build succesfully.

Thank you

RE: Installing OTBR manually (Raspberry Pi) on Ubuntu fails

Marte Myrvold — Thu, 13 Apr 2023 07:59:41 GMT

Hi,

I see no issues from the "ip a" command. You may be running out of RAM. Can you run "htop" in parallel with the "INFRA_IF_NAME=wlan0 ./script/setup" command to observe RAM and CPU usage of running the command?

Best regards,
Marte

RE: Installing OTBR manually (Raspberry Pi) on Ubuntu fails

Alex33 — Tue, 11 Apr 2023 10:12:11 GMT

Hi,

I'm using an 16GB microSD HC A1 class 10.

I ran the cmd "ip a" after the build got stuck at "[403/454] Building CXX object src/dbus/server/CMakeFiles/otbr-dbus-server.dir/dbus_object.cpp.o", here's the result :

rasp@raspberrypi:~/ot-br-posix$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether b8:27:eb:54:55:16 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether b8:27:eb:01:00:43 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.13/24 metric 600 brd 192.168.2.255 scope global dynamic wlan0
       valid_lft 85610sec preferred_lft 85610sec
    inet6 2a01:cb04:b43:a300:ba27:ebff:fe01:43/64 scope global dynamic mngtmpaddr noprefixroute
       valid_lft 86375sec preferred_lft 575sec
    inet6 fe80::ba27:ebff:fe01:43/64 scope link
       valid_lft forever preferred_lft forever

RE: Installing OTBR manually (Raspberry Pi) on Ubuntu fails

Marte Myrvold — Wed, 05 Apr 2023 09:34:08 GMT

Hi,

Which SD card are you using on your Raspberry Pi, and what size is it?

Please run "ip a" on the Pi and share the log here.

Best regards,

Marte