I'm looking for guidance on enabling all four PWM channels on the nrf5340-DK MCU development kit using SDKv2.3, which includes Zephyr and other complex software abstractions. Can you help me with this?

RE: I'm looking for guidance on enabling all four PWM channels on the nrf5340-DK MCU development kit using SDKv2.3, which includes Zephyr and other complex software abstractions. Can you help me with this?

Hieu — Tue, 09 May 2023 06:45:59 GMT

No problem. Feel free to close this ticket by verifying any answer(s) you deem worked, or I can also close it sometime later.

RE: I'm looking for guidance on enabling all four PWM channels on the nrf5340-DK MCU development kit using SDKv2.3, which includes Zephyr and other complex software abstractions. Can you help me with this?

Anthony Shivakumar — Mon, 08 May 2023 23:49:37 GMT

Will open another ticket regarding overlays if I run into issues. Thank you!

RE: I'm looking for guidance on enabling all four PWM channels on the nrf5340-DK MCU development kit using SDKv2.3, which includes Zephyr and other complex software abstractions. Can you help me with this?

Hieu — Mon, 08 May 2023 20:02:33 GMT

Hi Anthony,

I appreciate the additional hint for future readers.

While directly modifying the board definition like you are doing is a working approach, I also recommend using overlay files. You can read more about DTS and overlay files here:

https://developer.nordicsemi.com/nRF_Connect_SDK/doc/2.3.0/zephyr/build/dts/index.html

Eventually, you will want to use a custom board definition tailored for your product.

Thanks again 😃

RE: I'm looking for guidance on enabling all four PWM channels on the nrf5340-DK MCU development kit using SDKv2.3, which includes Zephyr and other complex software abstractions. Can you help me with this?

Anthony Shivakumar — Mon, 08 May 2023 18:58:01 GMT

For others who might find it helpful.
Open the file where your nrf sdk is installed:
<path_to_nrf_sdk>\v2.3.0\zephyr\boards\arm\nrf5340dk_nrf5340\nrf5340_cpuapp_common.dts

Make changes to add the 4 channels:

    pwmleds {
        compatible = "pwm-leds";
        pwm_led0: pwm_led_0 {
            pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
        };
        pwm_led1: pwm_led_1 {
            pwms = <&pwm0 1 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
        };
        pwm_led2: pwm_led_2 {
            pwms = <&pwm0 2 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
        };
        pwm_led3: pwm_led_3 {
            pwms = <&pwm0 3 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
        };
    };

open the pinctrl file

<path_to_nrf_sdk>\v2.3.0\zephyr\boards\arm\nrf5340dk_nrf5340\nrf5340_cpuapp_common-pinctrl.dtsi

and add:

assign the pins where you want PWM to be configured to. I believe any GPIO pin can be configured as a PWM. I have assigned to pin 23,24,29. Pin 28 is default.

    pwm0_default: pwm0_default {
        group1 {
            psels = <NRF_PSEL(PWM_OUT0, 0, 28)>,
                    <NRF_PSEL(PWM_OUT1, 0, 23)>,
                    <NRF_PSEL(PWM_OUT2, 0, 24)>,
                    <NRF_PSEL(PWM_OUT3, 0, 29)>;
        };
    };

    pwm0_sleep: pwm0_sleep {
        group1 {
            psels = <NRF_PSEL(PWM_OUT0, 0, 23)>,
                    <NRF_PSEL(PWM_OUT1, 0, 23)>,
                    <NRF_PSEL(PWM_OUT2, 0, 24)>,
                    <NRF_PSEL(PWM_OUT3, 0, 29)>;
            low-power-enable;
        };
    };

If you are using the blinky_pwm examples you can extend it to include all 4 channels by adding:

static const struct pwm_dt_spec pwm_led0 = PWM_DT_SPEC_GET(DT_ALIAS(pwm_led0));
static const struct pwm_dt_spec pwm_led1 = PWM_DT_SPEC_GET(DT_ALIAS(pwm_led1));
static const struct pwm_dt_spec pwm_led2 = PWM_DT_SPEC_GET(DT_ALIAS(pwm_led2));
static const struct pwm_dt_spec pwm_led3 = PWM_DT_SPEC_GET(DT_ALIAS(pwm_led3));

Thank you!

RE: I'm looking for guidance on enabling all four PWM channels on the nrf5340-DK MCU development kit using SDKv2.3, which includes Zephyr and other complex software abstractions. Can you help me with this?

Hieu — Mon, 08 May 2023 08:57:21 GMT

Hi Anthony,

I discussed that exact topic in this DevZone question. Could you please refer to it:

Zephyr PWM: pwm_nrfx err -> Invalid channel

Hieu