flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Mon, 31 Jul 2023 19:26:37 GMT

Hi,

Here is the pull request for disk access support.

Thank you for your patience.

Regards,
Amanda H.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Thu, 15 Jun 2023 14:28:26 GMT

Thanks for the feedback.

The root cause is if the partition manager is used, then there is a chance that the storage_partition gets redirected to some littlefs_storage partition placed on the internal SoC. The team is working on it.

-Amanda H.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Sergnrf — Thu, 15 Jun 2023 11:33:32 GMT

Perhaps it will be easier to solve the problem if partition the external flash drive into sections?

Best regards,
Serhii

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Wed, 14 Jun 2023 16:41:44 GMT

Hi,

The team is looking into the issue, but no promised schedule to fix it. Sorry for the inconvenience.

Regards,
Amanda H.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Sergnrf — Wed, 14 Jun 2023 16:30:35 GMT

Hi Amanda,
yes I checked it works well.

//However, as soon as you reset/power down the device you will lose all mesh configuration.

It doesn't suit us, as I understand it, you found the problem, when will there be a full-fledged fix?

Best regards,
Serhii

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Wed, 14 Jun 2023 14:06:34 GMT

Hi,

Could you test this project devzone.nordicsemi.com/.../chat_5F00_support_5F00_case.zip provided by the team? In this project, the configuration disables the settings feature in Mesh. With that, you will be able to use USB, provision the mesh device, etc. However, as soon as you reset/power down the device you will lose all mesh configuration.

-Amanda H.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Sergnrf — Wed, 24 May 2023 17:21:28 GMT

you set CONFIG_APP_MSC_STORAGE_RAM=y
my project also works with RAM but I need FLASH_FATFS

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Wed, 24 May 2023 15:48:48 GMT

Hi,

Please test this project devzone.nordicsemi.com/.../chatDK_5F00_update_5F00_0524.7z and let me know if it can work for you.

Here is the output:

>>> Bluetooth Mesh Chat sample <<<
Mount /RAM:: 0
/RAM:: bsize = 512 ; frsize = 512 ; blocks = 158 ; bfree = 158
/RAM: opendir: 0
End of files
Initializing...
[00:00:00.062,957] <inf> fs_nvs: nvs_mount: 8 Sectors of 4096 bytes
[00:00:00.062,957] <inf> fs_nvs: nvs_mount: alloc wra: 0, fd0
[00:00:00.062,988] <inf> fs_nvs: nvs_mount: data wra: 0, 1c
[00:00:00.063,659] <inf> bt_sdc_hci_driver: hci_driver_open: SoftDevice Controller build revision: 
                                            d8 0c 2d 2f 36 ae e2 5c  80 26 80 4c 3f 4d 16 53 |..-/6..\ .&.L?M.S
                                            50 96 c7 73                                      |P..s             
[00:00:00.066,711] <inf> bt_hci_core: hci_vs_init: HW Platform: Nordic Semiconductor (0x0002)
[00:00:00.066,741] <inf> bt_hci_core: hci_vs_init: HW Variant: nRF52x (0x0002)
[00:00:00.066,802] <inf> bt_hci_core: hci_vs_init: Firmware: Standard Bluetooth controller (0x00) Version 216.11532 Build 3803067951
[00:00:00.067,199] <inf> bt_hci_core: bt_init: No ID address. App must call settings_load()
Bluetooth initialized
[00:00:00.072,906] <inf> bt_hci_core: bt_dev_show_info: Identity: EA:99:19:7D:AC:FD (random)
[00:00:00.072,937] <inf> bt_hci_core: bt_dev_show_info: HCI: version 5.3 (0x0c) revision 0x124b, manufacturer 0x0059
[00:00:00.072,967] <inf> bt_hci_core: bt_dev_show_info: LMP: version 5.3 (0x0c) subver 0x124b
[00:00:00.073,211] <inf> bt_mesh_prov_device: bt_mesh_prov_enable: Device UUID: f2728b15-7533-78a8-0d4d-74ea8acc8717
Mesh initialized
uart:~$

I will be out of the office until next Tuesday, so you will not get a reply until that. If you are urgent, please create a new support case.

-Amanda H.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Sergnrf — Wed, 24 May 2023 10:57:33 GMT

Hi,

I still hope for your help.
Thanks

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Sergnrf — Fri, 19 May 2023 15:58:10 GMT

all the same errors in RTT, nothing changed

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Fri, 19 May 2023 15:18:22 GMT

Hi,

I see there are two warrings while building your project

../src/main.c: In function 'main':
../src/main.c:60:9: warning: implicit declaration of function 'setup_disk' [-Wimplicit-function-declaration]
   60 |         setup_disk();
      |         ^~~~~~~~~~
../src/main.c:61:15: warning: implicit declaration of function 'usb_enable'; did you mean 'bt_enable'? [-Wimplicit-function-declaration]
   61 |         err = usb_enable(NULL);
      |               ^~~~~~~~~~
      |               bt_enable

To fix them, I create mass.h and include it and zephyr/usb/usb_device.h. Also, update the checklist to include mass.h.

-Amanda H.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Sergnrf — Thu, 18 May 2023 16:11:56 GMT

sure
devzone.nordicsemi.com/.../chatDKmass.zip

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Thu, 18 May 2023 15:25:20 GMT

Hi,

[quote user="Sergnrf"]MASS example works[/quote]

I only see the MASS shown as a portable device and cannot be formatted. Could you provide your worked MASS example for the test?

Is it possible also to provide your CHAT example combined with the MASS example?

-Amanda H.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Sergnrf — Wed, 17 May 2023 19:06:59 GMT

MASS example works, how to combine it with the CHAT example so that it works?
CHAT example this is the development of Nordic.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Wed, 17 May 2023 18:43:58 GMT

Since the mass sample is provided by Zephyr, you can ask Zephyr Discord. Maybe the feature is not supported.

-Amanda H.

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Sergnrf — Tue, 16 May 2023 18:58:12 GMT

/delete-node/ &storage_partition;

&mx25l256 {
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		storage_partition: partition@0 {
			label = "storage";
			reg = <0x00000000 DT_SIZE_K(32000)>;
		};
	};
};

/ {
	msc_disk0 {
		compatible = "zephyr,flash-disk";
		partition = <&storage_partition>;
		disk-name = "NAND";
		cache-size = <4096>;
	};
};

DT_SIZE_K(32000) I change to 0x00020000 and the error goes away but the disk doesn't work at all.

I set CONFIG_APP_MSC_STORAGE_RAM=y the disk appears but windows says disk cannot be formatted.
devzone.nordicsemi.com/.../3857.chat.zip

RE: flashdisk_init_runtime: Error -22 while getting page info, usb_msc: mass_storage_init: Storage init ERROR !!!! - Aborting USB init

Amanda Hsieh — Tue, 16 May 2023 17:34:46 GMT

Hi,

[quote user=""]00> [00:00:00.002,838] <err> flashdisk: flashdisk_init_runtime: Error -22 while getting page info[/quote]

-22 means EINVAL, page at offs or idx doesn't exist. Try to copy mass/board/nrf52840dk_nrf52840.overlay to the target project.

[quote user=""]00> [00:00:00.003,509] <err> fs: fs_mount: fs mount error (-5)[/quote]

Try to add CONFIG_APP_MSC_STORAGE_RAM=y in the prj.conf. If this cannot work, please upload the prj.conf.

Regards,
Amanda H.