RTT log output issue
Hello, I am using SDK v3.0.2 and toolchain v3.0.2. After building and flashing my firmware, no logs are being output to RTT Viewer. What should I do...
We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hi all!
I have the NRF54H20 D and somehow the RTT viewer doesn’t work, the board doesn’t work. I am using the most simple zephyr hello world project. It says it is compatible...
Hi there,
We are using for BLE communication a nRF52832 chip with random static address configuration (shown in the UART). Can we be sure that the address of a chip will...
I am building an application for the nRF52840 on Linux just using west . I have been struggling with this issue for some time now. The linker can't find any mbedtls_ccm functions...
Hello, I am experiencing issues with the current measurements taken by the PPK2 when using the nPM2100-EK to power a device. The current drawn from the 2.7V power source ...
I have been trying to get MQTT+TLS to work on the nRF7002 DK and haven't been able to get the samples to connect to the MQTT Broker.
Is there a working MQTT TLS example...
I flashed two nrf52832 with a black magic probe. Unfortunately after reconnecting the USB, I wasn't able to flash them anymore. So, I tried the nrfjprog command line program...
Hello,
Our application is currently based on the Nordic SDK services such as app_scheduler and app_timer. It is not possible to change this to use an RTOS do to regulatory...
Hi Devzone:
I am trying to gauge the power consumption after nrf_power_system_off() is called.
So is there a list of the hardwares that "nrf_power_system_off()" shuts...
I am using nrf52832 radios to communicate using ESB without DPL. I have selective_auto_ack=true and I set the payload.noack=true. But each time I transmit and there is not...
I am trying to create a description of my peripherals in the device tree. For example, I want to describe the pins that will control the input type for the ADC. Current input...
Open LTE Link Monitor OK, but point connections appear with the following blank interface
Here's the LTE Link Monitor that shows the blank
LTE Link Monitor is...
Hello,
I am using NRF52840 with SDK 16.0.0 and Mesh SDK 4.1.0
.I am trying to use SAADC with BLE Mesh(SDK 4.1.0). I used default example of SAADC with multiple channel...
I am new to nRF9160 development board. I have just opened the board and tried to connect following the startup instructions. I was able to see LED 3 and LED 4 blink the first...
Hi all,
I am trying to get a hang of SES platform(Using the nRF52840 Preview DK, SDK 15.3) and it's my first few trails with it. I am trying something very basic now to...
I want to read characteristics (central needs read data from peripheral whenever he want ) but don’t want to use notification.
I am trying this with authorization but it...
I have already set up a successful sender and receiver. The receiver was using an arduino board and the sender a avr at90usb162. I have now removed the arduino and moving...
Hello,
My project is using Lora + radar + ble so I am trying to let 1 radio tx at a time for FCC and power.
For this, I found time slot API and extension at the links...
Dear Nordic Team,
I am working on a product which implements OTA DFU(buttonless DFU inside). So far everything works fine and the updates are working.
The question is...
Hello,
I am using nRF52840 S140 V7.0.1. I am using ble_app_multirole_lesc example. I changed roles from “Central and Peripheral” to “Observer and Broadcater”.
My understanding...
