When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
I am planning to migrate to SD 7.0 and SDK 6.0 in order to use the static pass key capabilities. When using the static pass key how should security params be initialized ...
Hi, I am trying to build ADXL362 with pca10090ns for nrf9160DK (PCA10090) (west build -b nrf9160_pca10090ns). I have added the following configurations in prj.conf. Though...
Hi teams,
During development, I need quite a long period timer for hours.
Searching for the subject, I found application timer can only handle few minutes because of 24bit...
I am evaluating the nRF52840-DK dev kit and want to to make changes to the 'LIGHT_SWITCH' application so I understand better how this is achieved. I have some demo code, but...
Hi
We are developing a custom board with nRF52840 and nRF9160. The 9160 is running a modified version of serial_LTE_modem, whereas the 52840 is running the main application...
On a custom pcb, an I2C sensor is connected on P0_15 and P0_16 ( SDA & SCL ).
When sensor reading is requested, the code is designed to wait till the reading is returned...
I am building an app that includes background DFU in the app. My app is based on the freertos example.
I am having problems during nrf_dfu_settings_write due to the checks...
Hi,
we are developing NB-IOT based GPS tracker based on nRF9160.
we have implemented the A-GPS based on SUPL. After using A-GPS there is a minor improvement in the overall...
Hi,
When I first start the modem and connect to NW. XMONITOR AT command shows data like this:
%XMONITOR: 5,"","","24412","C739",9,20,"0017E878",4,6154,71,40,"","11100000...
Dear
I am developing my BT Mesh project of nrf52 by Segger Embedded Studio.
But I can not add CVS function and can not make the dependencies files display. I ask Segger...
Hello, we have developed an BLE application based on the ble_peripheral/ble_app_uart example on an nRF52-DK dev kit with an nrf52832. It works great.
On our production board...
Hello support, for the intergration of the thingy 52 i need to Register with mac adress.
First you need to have the right application running on your Android device ("Nordic...
I just brute force changed to "AWS_IOT", having the keys , and other config already in place after having tried the cloud sample code successfully against AWS
main.c
line...
During BLE startup call to nrf_sdh_enable_request(), nrf_atfifo_item_alloc fails and returns NULL causing a hard fault.
This sounds like an sdk_config.h problem but I don...
Dear all,
I have 10000 devices and I need to put a different value for every device, but I do not want to create 10000 firmware.
Is possible to do that with a tool? I...
Thanks for the reply. I can program my custom PCB from the nrf52 but I can't program the on-board nrf52832. It is always looking for Jlink to an external board. What tells...
