We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hi all!
I have the NRF54H20 D and somehow the RTT viewer doesn’t work, the board doesn’t work. I am using the most simple zephyr hello world project. It says it is compatible...
Hi there,
We are using for BLE communication a nRF52832 chip with random static address configuration (shown in the UART). Can we be sure that the address of a chip will...
I am building an application for the nRF52840 on Linux just using west . I have been struggling with this issue for some time now. The linker can't find any mbedtls_ccm functions...
Hello, I am experiencing issues with the current measurements taken by the PPK2 when using the nPM2100-EK to power a device. The current drawn from the 2.7V power source ...
I have been trying to get MQTT+TLS to work on the nRF7002 DK and haven't been able to get the samples to connect to the MQTT Broker.
Is there a working MQTT TLS example...
Seeing the failure below and wondering a couple things:
How did the device get into this state?
How do I disable AP protection? The Kconfig GUI seems to indicate that...
Hi,
First, I understand this are Android questions, but I want to appeal to this very knowledgeable community ;)
I have a BLE application using nrf51822 with SD 110...
int lbs
Hi,everyone,we change the uuid to
#define LBS_UUID_SERVICE 0x2101
#define LBS_UUID_LED_CHAR 0x3A01
#define LBS_UUID_BUTTON_CHAR 0x3A02
in nrf51-ble-app-lbs...
I am writing a custom Service. I need to catch when a Client tries to Read certain characteristics or Write to other characteristics. What is the best practice for Authorizing...
Hello support team,
If a message is received while the timer0 is running and the radio interrupt is enabled, the Radio interrupt hits and disables the timer interrupt....
Hi,
I have a simple application that requires command-response, and notifications interaction between an Android App and an embedded device.
The communication is bidirectional...
Hello,
I wonder how an ANT client should / would / could receive burst data. From what I'm read from the documentation, I guess that the received data will be passed to the...
Hi (I'm new at this, sorry for my question)
About Gazell & Pipe (nRF24LE1)
What is the utility of 6 or 8 pipe, whether only has 3 RX_FIFO for working simultaneous?
Can...
Hi All
I am trying to verify UART on one of our custom boards having nrf51822.
We have only one uart which we are using to forward the data received over BLE.
I am...
I use the demo : ble_app_proximity
to connect with android app
In android use this :
mBluetoothGatt = device.connectGatt(mContext, true, mGattCallback);
to set the reconnect...
Hi,
I'm checking out the new nrf51_sdk_v6_0_0_43681 for S110-SD-v7
Is there a revision-history available for the src files within the new SDK package?
For example...
I am trying to make a product with NRF8002B. I finally have the product prototyped. The user will connect to the device, beep, light up, and track. It will always stay on...
Hi all,
I have been stuck trying to debug the example project for a couple of days now and could not find the answer through searching. Here are my problems.
Background...