"OpenWRT Series" #1: setting up TP-Link WDR4300 (or N750) for Bluetooth Low Energy 6LoWPAN

RE: "OpenWRT Series" #1: setting up TP-Link WDR4300 (or N750) for Bluetooth Low Energy 6LoWPAN

Mazedur Rahaman — Sat, 04 Aug 2018 08:20:13 GMT

Great post, PK.. i have follow all of the instructions and able to connect to the nrf chip to my raspberry pi which is running openWRT and the raspberry pi is connected to a router... and my pc also connect to that router...

i can ping the raspberry pi which has a ipv6 address and also ipv4

Ping statistics for fe80::ba27:ebff:fea0:598d:
Packets: Sent = 6, Received = 6, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 3ms, Average = 1ms

But when i try to ping my BLE this message comes out...

Pinging fd60:23a7:e464::1 with 32 bytes of data:

PING: transmit failed. General failure.

PING: transmit failed. General failure.

But i can ping this same address from my RPI3...

RE: "OpenWRT Series" #1: setting up TP-Link WDR4300 (or N750) for Bluetooth Low Energy 6LoWPAN

Xue Liu — Mon, 25 Jan 2016 18:13:01 GMT

Thank you for your post, It is very cool and useful.

I have one question about the firewall configuration. I have Arduino Yun. Now it works as a client of my WiFi router. My pc also connects the router. According to your screenshot the "LAN" is a bridge between ehternet and wireless. But in my case (with client wlan0, eth0 without bridge). How should I config the firewall to enable the package forward between wlan0 and bt0 ?

RE: "OpenWRT Series" #1: setting up TP-Link WDR4300 (or N750) for Bluetooth Low Energy 6LoWPAN

Reidar Martin Svendsen — Wed, 10 Jun 2015 19:29:44 GMT

Great post, PK! Really cool to see that good solutions for OpenWRT are coming!

Cheers!