/nordic/nordic-blog/b/blog/posts/nrf52-debugging-with-qtcreator-on-windowsHello I succeeded to configure QtCreator toolchain to compile and debug my NRF52 board. So I wanted to share. I use my own Makefile to compile everything so I will focus here on how to run a debug session (with breakpoints and candies !) inside Qten-USTelligent Community 13https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/nrf52-debugging-with-qtcreator-on-windowsFri, 12 Aug 2016 13:26:04 GMT137ad170-7792-4731-bb38-c0d22fbe4515:32f35f08-3b9f-41e7-b645-8a7565443639LovejoySteph0<p>Hello,</p> <p>For some reason, Qt does not allow the creation of a Bare metal OpenOCD (only way to connect to jlink) configuration that as Startup mode = Startup in TCP/Ip mode.</p> <p>So I&#39;m unfortunately still manually launching gdb server.</p> <img src="https://devzone.nordicsemi.com/aggbug?PostID=934&AppID=4&AppType=Weblog&ContentType=0" width="1" height="1">https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/nrf52-debugging-with-qtcreator-on-windowsFri, 12 Aug 2016 09:11:36 GMT137ad170-7792-4731-bb38-c0d22fbe4515:32f35f08-3b9f-41e7-b645-8a7565443639wim0<p>Hi</p> <p>i have been looking for even better integration, by having the debug output also sent to the application output pane, and start the gdb server automatically, but up till now did not succeed. Has anyone been able to do this?</p> <img src="https://devzone.nordicsemi.com/aggbug?PostID=934&AppID=4&AppType=Weblog&ContentType=0" width="1" height="1">https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/nrf52-debugging-with-qtcreator-on-windowsTue, 28 Jun 2016 09:59:53 GMT137ad170-7792-4731-bb38-c0d22fbe4515:32f35f08-3b9f-41e7-b645-8a7565443639LovejoySteph0<p>Thanks, it was helpful. I managed to debug my custom board (based on a nrf52) using a j-link debugger and j-link gdb server</p> <img src="https://devzone.nordicsemi.com/aggbug?PostID=934&AppID=4&AppType=Weblog&ContentType=0" width="1" height="1">