Segger Embedded Debugger version 3 and how I got it to compiling

RE: Segger Embedded Debugger version 3 and how I got it to compiling

noe — Fri, 14 Oct 2016 13:59:58 GMT

Thanks for the post. I got that far alone, though. Now I'm trying to get the ble_uart_app to run. It compiles and loads fine now. Advertising works but when I want to connect, the service discovering doesn't seem to be working. It's a bit strange because interaction with the softdevice seems to be ok since advertising works. Will keep working on it. Using SES v3.10a, s132 3.0.0, sdk 12.0.0, pca10040

RE: Segger Embedded Debugger version 3 and how I got it to compiling

RichieJH — Fri, 30 Sep 2016 10:06:02 GMT

Thanks for taking the time to do this Morten. The biggest issue I have is that the pre-processor definitions and user included directories are not being carried over from SES 2.2 to SES 3.x meaning all of this has to be entered again. This seems to be a major flaw between the two versions and it would be good if SEGGER looked at this. This alone is preventing me upgrading since this is a whole lot of work I'd rather avoid.

RE: Segger Embedded Debugger version 3 and how I got it to compiling

Morten — Mon, 26 Sep 2016 16:51:05 GMT

This is the first version of the SES I have tried, so I do not now if there is major improvements to this version. I have looked for a change log from segger but could not find any by looking at there pages and by use of google.

RE: Segger Embedded Debugger version 3 and how I got it to compiling

Wojtek — Mon, 26 Sep 2016 11:03:58 GMT

Thank You for the guidelines! Does SES 3 have any interesting features that make it worth to migrate from version 2?