SHT10 temperature and humidity sensor library for nRF52832

[Yaniv Nis]

Hi,

I'm building a project with nRF52832 dev kit and the SHT10 temperature and humidity sensor, I'm searching for a library/example project of this sensor and the nRF52. So far I didn't find one, are you familiar with one?

Thanks!

[John]

Hello Yaniv,

I'm not aware of an nRF52 example project. I did interface a SHT75 to a nRF51 so here are a couple of observations:

1. The SHT10/SHT75 is a 2-wire interface, but it is not compatible with I2C. You have to bit-bang the clock and data lines to send commands. It's not hard, and they do have example code. You just need to set up a couple of GPIO pins and toggle away.

2. If that is a problem. Sensiron has a newer sensor that supports standard I2C.

John

[Yaniv Nis]

Hi John,

Where can I find their example code? I have the SHT10 sensor so I'll try to work with it.

Thanks!!!

[John]

You just have to go to their download center, scroll down to the SHT1x section and one of the available items is a link to example code. You can find the download center here: Sensiron dlc

[sosse]

This is how I used SHT10 sensor with nrf51822. It works fine for me. it is not I2C protocol. So you have to do call each protocol step by step.

https://github.com/kimyd/SHT1X_on_nrf51822