Hi,
I am using as settings:
timeslot period: 600 us
data rate: 2M
channel table size: 4
timeslots when out of sync: 8
timeslots per channel: 2
sync lifetime: 10
max tx attempts: 2
channel selection policy: use current
I am sending packets every 600 us, so I expect that the smallest time between two sequential received packets is +- 600 us. After measuring for 30 minutes, I have a minimum time of 1.2 ms between two received packets, which is 2 times the timeslot period. The retranmission rate was 0.89 %.
Is it possible to use every timeslot to send a packet? It seems that gazell only sends a new packet every other timeslot period, even if a retransmission is not needed.