• State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 62 subscribers
  • Views 1316 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 104928
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to use PCA10024 as MCP dongle

Chris Roelle

Hello -

I'm not having any success using my PCA10024 as a dongle for MCP. Here is what I'm doing so far....

  1. Remove PCA10024 jumper from P0.30-GND.
  2. Connect PCA10024 to Win7 PC - MBED (G:) enumerates.
  3. Copy MEFW_nRF51822_0.9.0_firmware_115K2.hex to G:\ - PCA10024 seems to program firmware (LED blinks several times).
  4. Disconnect PCA10024 from Win7 PC. - MBED (G:) de-enumerates.
  5. Jumper P0.30-GND.
  6. Connect PCA10024 to Win7 PC - MBED (G:) enumerates again.

I feel like at this point a new COM port should show up in Device Manager, but no new COM port is there.

Seems like I must be missing something - any advice?

Thanks, CR

Related