IoT_SDK_step_by_step.pdf with Raspberry Pi (Model B, 512MB)‎ Kernel version 3.18 (2015-02-16-raspbian-wheezy.img)

[nullpointer]

Hi, I am following the tutorial using Raspberry Pi Kernel version 3.18, but after the step 7, the raspberry gets frozen with the colorful image in the beginning of the boot process. During the installation there is a strange message: "I can not read it: No such file or directory".. (attached) I've tried twice with the same result... Any idea ? Thanks

Installation:

Before reboot:

[Håkon Alseth]

Hi,

Are you following this guide? devzone.nordicsemi.com/.../

If yes, then you must have a Raspberry Pi 1 in order to use that kernel, if not you'll see rainbows when booting the kernel. If you have a Raspberry Pi 2, you'll need to compile the kernel manually. Here's a guide on how to do that: devzone.nordicsemi.com/.../

Cheers, Håkon

[darkzone]

true I have the RASPBERRY PI MODEL B 512MB. Thakns

[Håkon Alseth]

And the 3.17.4 image from our website does not work? Could you post "ls -la /boot" and "cat /boot/config.txt" ?

Note: you can mount the SD card on another computer (will work on windows as well), remove the "kernel=someimg" from config.txt to revert to the raspbian kernel image.

[nullpointer]

in fact, I use v 3.18, I was not sure how to flash the Raspberry PI with your image, since I need a IMG file to flash it and the zip file was not recognized with the program I am using: ApplePi-Baker