Beacon RGB led definition

[nejcokle]

Hello,

I'm having problems with defining RGB led on my beacon (pca20006). When i define for example RED led (on pin 12) with code nrf_gpio_cfg_output(12); i should be able to manipulate it with commands nrf_gpio_pin_toggle, nrf_gpio_pin_clear and nrf_gpio_pin_set right?

But my problem is when i define it as output with comand above, led starts shining bright RED and i can't turn it off any other way than resetting the chip. I need to be able to turn it off since i want to singal the path of data for my project with leds on beacons.

I'm using pca20006.h as my pin setup.

Thanks for help in advance.

[Susheel Nuguru]

i recommend to try blinky example SDK\examples\peripheral\pwm\pca10028\arm5_no_packs and change the define in target_options C/C++ to BOARD_PCA20006 add this line in the main.c

#define LEDS_LIST { LED_RGB_RED, LED_RGB_GREEN, LED_RGB_BLUE }

I just tested it as i mentioned in another thread and it works just fine with all the commands.