µVision Build Log
Project:
C:\Users\zhu\Desktop\nrf51822-flash\nrf51822_application\Board\pca10001\s110\experimental\ble_app_uart\arm\ble_app_uart.uvproj
Project File Date:  06/01/2016

Output:
Rebuild target 'nrf51822_xxaa_s110 (256K)'
assembling arm_startup_nrf51.s...
compiling system_nrf51.c...
compiling main.c...
..\main.c(234): warning:  #550-D: variable "sum" was set but never used
    uint8_t val,len,sum;
..\main.c: 1 warning, 0 errors
compiling ble_srv_common.c...
compiling ble_nus.c...
compiling ble_advdata.c...
compiling ble_conn_params.c...
compiling softdevice_handler.c...
compiling simple_uart.c...
compiling app_timer.c...
compiling pstorage.c...
linking...
Program Size: Code=12988 RO-data=244 RW-data=144 ZI-data=3096  
FromELF: creating hex file...
".\_build\application.axf" - 0 Error(s), 1 Warning(s).
Load "C:\\Users\\zhu\\Desktop\\nrf51822-flash\\nrf51822_application\\Board\\pca10001\\s110\\experimental\\ble_app_uart\\arm\\_build\\application.axf" 
Set JLink Project File to "C:\Users\zhu\Desktop\nrf51822-flash\nrf51822_application\Board\pca10001\s110\experimental\ble_app_uart\arm\JLinkSettings.ini"
* JLink Info: Device "NRF51822_XXAA" selected.
 
JLink info:
------------
DLL: V4.98b, compiled Apr 10 2015 20:15:52
Firmware: J-Link OB-SAM3U128 V1 compiled Nov 28 2014 10:24:11
Hardware: V1.00
S/N : 480205921 
 
* JLink Info: Found SWD-DP with ID 0x0BB11477
* JLink Info: Found Cortex-M0 r0p0, Little endian.
* JLink Info: FPUnit: 4 code (BP) slots and 0 literal slots
* JLink Info: CoreSight components:
* JLink Info: ROMTbl 0 @ F0000000
* JLink Info: ROMTbl 0 [0]: F00FF000, CID: B105100D, PID: 000BB471 ROM Table
* JLink Info: ROMTbl 1 @ E00FF000
* JLink Info: ROMTbl 1 [0]: FFF0F000, CID: B105E00D, PID: 000BB008 SCS
* JLink Info: ROMTbl 1 [1]: FFF02000, CID: B105E00D, PID: 000BB00A DWT
* JLink Info: ROMTbl 1 [2]: FFF03000, CID: B105E00D, PID: 000BB00B FPB
* JLink Info: ROMTbl 0 [1]: 00002000, CID: B105900D, PID: 000BB9A3 ???
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: nRF51822_xxAA
VTarget = 3.300V
State of Pins: 
TCK: 0, TDI: 0, TDO: 1, TMS: 1, TRES: 1, TRST: 1
Hardware-Breakpoints: 4
Software-Breakpoints: 8192
Watchpoints:          2
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Application running ...

AG speed: 2000 kHz Erase Done. Programming Done. Verify OK. Application running ... \\arm\\_build\\application.axf" Set JLink Project File to "C:\Users\zhu\Desktop\nrf51822-flash\nrf51822_application\Board\pca10001\s110\experimental\ble_app_uart\arm\JLinkSettings.ini" * JLink Info: Device "NRF51822_XXAA" selected. JLink info: ------------ DLL: V4.98b, compiled Apr 10 2015 20:15:52 Firmware: J-Link OB-SAM3U128 V1 compiled Nov 28 2014 10:24:11 Hardware: V1.00 S/N : 480205921 * JLink Info: Found SWD-DP with ID 0x0BB11477 * JLink Info: Found Cortex-M0 r0p0, Little endian. * JLink Info: FPUnit: 4 code (BP) slots and 0 literal slots * JLink Info: CoreSight components: * JLink Info: ROMTbl 0 @ F0000000 * JLink Info: ROMTbl 0 [0]: F00FF000, CID: B105100D, PID: 000BB471 ROM Table * JLink Info: ROMTbl 1 @ E00FF000 * JLink Info: ROMTbl 1 [0]: FFF0F000, CID: B105E00D, PID: 000BB008 SCS * JLink Info: ROMTbl 1 [1]: FFF02000, CID: B105E00D, PID: 000BB00A DWT * JLink Info: ROMTbl 1 [2]: FFF03000, CID: B105E00D, PID: 000BB00B FPB * JLink Info: ROMTbl 0 [1]: 00002000, CID: B105900D, PID: 000BB9A3 ??? ROMTableAddr = 0xE00FF003 Target info: ------------ Device: nRF51822_xxAA VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 1, TRES: 1, TRST: 1 Hardware-Breakpoints: 4 Software-Breakpoints: 8192 Watchpoints: 2 JTAG speed: 2000 kHz Erase Done. Programming Done. Verify OK. Application running ...