Connecting J-Link using USB
Connecting to target using SWD
Loaded C:/Users/kover/ncs/v1.5.0/toolchain/segger_embedded_studio/bin/JLink_x64.dll
Firmware Version: J-Link OB-K22-NordicSemi compiled Jan 21 2020 17:33:01
DLL Version: 6.94a
Hardware Version: V1.00
Target Voltage: 3.300
Device "NRF5340_XXAA_NET" selected.
ConfigTargetSettings() start
ConfigTargetSettings() end
InitTarget() start
InitTarget() end
Found SW-DP with ID 0x6BA02477
DPIDR: 0x6BA02477
AP map detection skipped. Manually configured AP map found.
AP[0]: AHB-AP (IDR: Not set)
AP[1]: AHB-AP (IDR: Not set)
AP[2]: MEM-AP (IDR: Not set)
AP[3]: MEM-AP (IDR: Not set)
AP[1]: Core found
AP[1]: AHB-AP ROM base: 0xE00FF000
CPUID register: 0x410FD214. Implementer code: 0x41 (ARM)
Found Cortex-M33 r0p4, Little endian.
FPUnit: 8 code (BP) slots and 0 literal slots
Security extension: not implemented
CoreSight components:
ROMTbl[0] @ E00FF000
ROMTbl[0][0]: E000E000, CID: B105900D, PID: 000BBD21 Cortex-M33
ROMTbl[0][1]: E0001000, CID: B105900D, PID: 000BBD21 DWT
ROMTbl[0][2]: E0002000, CID: B105900D, PID: 000BBD21 FPB
ROMTbl[0][6]: E0042000, CID: B105900D, PID: 000BBD21 CSS600-CTI
Preparing target for download
Executing Reset script TargetInterface.resetAndStop()
ResetTarget() start
ResetTarget() end
Downloading zephyr.elf to J-Link
Programming 174.5 KB of addresses 01000000  0102ba23
Programming 1.3 KB of addresses 0102ba24  0102bfbb
T-bit of XPSR is 0 but should be 1. Changed to 1.
Timeout while preparing target, RAMCode did not respond in time. (PC = 0x00000000, CPSR = 0x00000000, LR = 0x61000003)!
Failed to prepare RAMCode using RAM
Failed to download application.
Generic error.
Please check J-Link and target connection.
Illegal value 0x21009F90 written to register 67 (PSP_NS) ignored
