Building openthread
west build --build-dir d:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build d:/joiner_dfu_2_6_1/openthread_reset_fix/openthread --pristine --board nrf5340dk_nrf5340_cpuapp -- -DNCS_TOOLCHAIN_VERSION="NONE" -DCONFIG_SIZE_OPTIMIZATIONS=y -DCONF_FILE="prj.conf" -DEXTRA_CONF_FILE="overlay-bt.conf" -DDTC_OVERLAY_FILE=boards/nrf5340dk_nrf5340_cpuapp.overlay -DEXTRA_DTC_OVERLAY_FILE=boards/nrf5340dk_nrf5340_cpuapp.overlay

-- west build: generating a build system
Loading Zephyr default modules (Zephyr base).
-- Application: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.6.1/zephyr/.cache
-- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf5340dk_nrf5340_cpuapp
-- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/cf2149caf2/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp.dts
-- Found devicetree overlay: boards/nrf5340dk_nrf5340_cpuapp.overlay
-- Found devicetree overlay: boards/nrf5340dk_nrf5340_cpuapp.overlay
-- Generated zephyr.dts: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/zephyr.dts
-- Generated devicetree_generated.h: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/include/generated/devicetree_generated.h
-- Including generated dts.cmake file: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/dts.cmake

warning: NET_CONFIG_NEED_IPV6 (defined at boards/shields\sparkfun_sara_r4\Kconfig.defconfig:35,
boards/shields\wnc_m14a2a\Kconfig.defconfig:28, subsys/net/lib/config/Kconfig:28) was assigned the
value 'y' but got the value 'n'. Check these unsatisfied dependencies: ((NETWORKING &&
SHIELD_SPARKFUN_SARA_R4) || (NETWORKING && SHIELD_WNC_M14A2A) || (NET_CONFIG_AUTO_INIT &&
NETWORKING)) (=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_NET_CONFIG_NEED_IPV6
and/or look up NET_CONFIG_NEED_IPV6 in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.


warning: BT_CTLR_DATA_LENGTH_MAX (defined at
C:/ncs/v2.6.1/nrf\samples\common\mcumgr_bt_ota_dfu/Kconfig:131,
C:/ncs/v2.6.1/nrf\subsys\bluetooth\services\fast_pair/Kconfig.fast_pair:101,
subsys/bluetooth\controller/Kconfig:490) was assigned the value '151' but got the value ''. Check
these unsatisfied dependencies: (NCS_SAMPLE_MCUMGR_BT_OTA_DFU_SPEEDUP || (BT_FAST_PAIR_GATT_SERVICE
&& BT_FAST_PAIR && BT) || (BT_CTLR_DATA_LENGTH && BT_CONN && BT_CTLR && BT_HCI && BT)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_CTLR_DATA_LENGTH_MAX and/or look up
BT_CTLR_DATA_LENGTH_MAX in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.


warning: OPENTHREAD_COAP (defined at C:/ncs/v2.6.1/zephyr/modules/openthread\Kconfig.features:68,
modules\openthread\Kconfig.features:68) was assigned the value 'n' but got the value 'y'. See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_OPENTHREAD_COAP and/or look up
OPENTHREAD_COAP in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.

Parsing D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/Kconfig
Loaded configuration 'C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp_defconfig'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/prj.conf'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/overlay-bt.conf'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/misc/generated/extra_kconfig_options.conf'
Configuration saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/.config'
Kconfig header saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/include/generated/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
CMake Warning at C:/ncs/v2.6.1/zephyr/subsys/mgmt/mcumgr/grp/fs_mgmt/CMakeLists.txt:26 (message):
  Note: MCUmgr file system management is enabled but file access hooks are
  disabled, this is an insecure configuration and not recommended for
  production use, as all files on the filesystem can be manipulated by a
  remote device.  See
  https://docs.zephyrproject.org/latest/services/device_mgmt/mcumgr_callbacks.html
  for details on enabling and using MCUmgr hooks.



=== child image multiprotocol_rpmsg - CPUNET begin ===
loading initial cache file D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/child_image_preload.cmake
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v2.6.1/nrf/samples/nrf5340/multiprotocol_rpmsg
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.6.1/zephyr/.cache
-- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf5340dk_nrf5340_cpunet
-- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/cf2149caf2/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet.dts
-- Found devicetree overlay: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/multiprotocol_rpmsg/boards/nrf5340dk_nrf5340_cpunet.overlay
-- Generated zephyr.dts: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/zephyr.dts
-- Generated devicetree_generated.h: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/include/generated/devicetree_generated.h
-- Including generated dts.cmake file: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/dts.cmake

warning: BT_OBSERVER (defined at C:/ncs/v2.6.1/nrf\subsys\bluetooth\rpc/Kconfig:151,
subsys/bluetooth/Kconfig:101) was assigned the value 'n' but got the value 'y'. See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_OBSERVER and/or look up BT_OBSERVER in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.


warning: BT_BROADCASTER (defined at C:/ncs/v2.6.1/nrf\subsys\bluetooth\rpc/Kconfig:159,
subsys/bluetooth/Kconfig:95) was assigned the value 'n' but got the value 'y'. See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_BROADCASTER and/or look up
BT_BROADCASTER in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: PRINTK (defined at subsys/debug/Kconfig:204) was assigned the value 'n' but got the value
'y'. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_PRINTK and/or look up PRINTK in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.

Parsing C:/ncs/v2.6.1/zephyr/Kconfig
Loaded configuration 'C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet_defconfig'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/multiprotocol_rpmsg/prj.conf'
Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/bootloader/image/secure_boot.conf'
Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/partition_manager/partition_manager_enabled.conf'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/multiprotocol_rpmsg.conf'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/misc/generated/extra_kconfig_options.conf'
Configuration saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/.config'
Kconfig header saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/include/generated/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe

=== child image b0n - CPUNET (inherited) begin ===
loading initial cache file D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/child_image_preload.cmake
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v2.6.1/nrf/samples/nrf5340/netboot
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.6.1/zephyr/.cache
-- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf5340dk_nrf5340_cpunet
-- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/cf2149caf2/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet.dts
-- Generated zephyr.dts: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/zephyr.dts
-- Generated devicetree_generated.h: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/include/generated/devicetree_generated.h
-- Including generated dts.cmake file: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/dts.cmake
Parsing C:/ncs/v2.6.1/nrf/samples/nrf5340/netboot/Kconfig
Loaded configuration 'C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet_defconfig'
Merged configuration 'C:/ncs/v2.6.1/nrf/samples/nrf5340/netboot/prj.conf'
Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/partition_manager/partition_manager_enabled.conf'
Configuration saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/.config'
Kconfig header saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/include/generated/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
CMake Warning at C:/ncs/v2.6.1/zephyr/CMakeLists.txt:1957 (message):
  __ASSERT() statements are globally ENABLED


-- Configuring done
-- Generating done
-- Build files have been written to: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n
=== child image b0n - CPUNET (inherited) end ===

CMake Warning at C:/ncs/v2.6.1/nrf/subsys/bootloader/cmake/debug_keys.cmake:36 (message):


      --------------------------------------------------------------
      --- WARNING: Using generated NSIB public/private key-pair. ---
      --- It should not be used for production.                  ---
      --- See CONFIG_SB_SIGNING_KEY_FILE                         ---
      --------------------------------------------------------------


Call Stack (most recent call first):
  C:/ncs/v2.6.1/nrf/subsys/bootloader/cmake/provision_hex.cmake:47 (include)
  C:/ncs/v2.6.1/nrf/subsys/CMakeLists.txt:20 (include)


-- libmetal version: 1.4.0 (C:/ncs/v2.6.1/nrf/samples/nrf5340/multiprotocol_rpmsg)
-- Build type:
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- Looking for include file stdatomic.h
-- Looking for include file stdatomic.h - found
-- open-amp version: 1.4.0 (C:/ncs/v2.6.1/modules/lib/open-amp/open-amp)
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- C_FLAGS :  -Wall -Wextra
-- Looking for include file fcntl.h
-- Looking for include file fcntl.h - found
CMake Warning at C:/ncs/v2.6.1/zephyr/CMakeLists.txt:1957 (message):
  __ASSERT() statements are globally ENABLED


CMake Warning at C:/ncs/v2.6.1/nrf/cmake/partition_manager.cmake:79 (message):


          ---------------------------------------------------------------------
          --- WARNING: Using a bootloader without pm_static.yml.            ---
          --- There are cases where a deployed product can consist of       ---
          --- multiple images, and only a subset of these images can be     ---
          --- upgraded through a firmware update mechanism. In such cases,  ---
          --- the upgradable images must have partitions that are static    ---
          --- and are matching the partition map used by the bootloader     ---
          --- programmed onto the device.                                   ---
          ---------------------------------------------------------------------


Call Stack (most recent call first):
  C:/ncs/v2.6.1/zephyr/cmake/modules/kernel.cmake:248 (include)
  C:/ncs/v2.6.1/zephyr/cmake/modules/zephyr_default.cmake:138 (include)
  C:/ncs/v2.6.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  C:/ncs/v2.6.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:5 (find_package)


-- Configuring done
-- Generating done
-- Build files have been written to: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg
=== child image multiprotocol_rpmsg - CPUNET end ===

-- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found version "3.9.13") found components: Interpreter

=== child image mcuboot -  begin ===
loading initial cache file D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/child_image_preload.cmake
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v2.6.1/bootloader/mcuboot/boot/zephyr
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.6.1/zephyr/.cache
-- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf5340dk_nrf5340_cpuapp
-- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/cf2149caf2/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6")
-- Found BOARD.dts: C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp.dts
-- Found devicetree overlay: C:/ncs/v2.6.1/nrf/modules/mcuboot/flash_sim.overlay
-- Found devicetree overlay: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/mcuboot/boards/nrf5340dk_nrf5340_cpuapp.overlay
-- Generated zephyr.dts: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/zephyr.dts
-- Generated devicetree_generated.h: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/include/generated/devicetree_generated.h
-- Including generated dts.cmake file: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/dts.cmake

warning: MBEDTLS_ECP_C (defined at C:/ncs/v2.6.1/nrf\modules/trusted-
firmware-m/Kconfig.mbedtls_minimal.defconfig:41,
C:/ncs/v2.6.1/nrf\subsys\nrf_security\Kconfig.legacy:521,
C:/ncs/v2.6.1/zephyr/modules/mbedtls\Kconfig.tls-generic:145, modules\mbedtls\Kconfig.tls-
generic:145) was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies:
(TFM_PROFILE_TYPE_MINIMAL || (MBEDTLS_LEGACY_CRYPTO_C && NRF_SECURITY) || (!(NRF_SECURITY ||
NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS)
|| (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-
generic.h" && MBEDTLS && 0)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MBEDTLS_ECP_C and/or look up MBEDTLS_ECP_C
in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.


warning: MBEDTLS_ECDSA_C (defined at C:/ncs/v2.6.1/nrf\subsys\nrf_security\Kconfig.legacy:542,
C:/ncs/v2.6.1/zephyr/modules/mbedtls\Kconfig.tls-generic:137, modules\mbedtls\Kconfig.tls-
generic:137) was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies:
((MBEDTLS_ECP_C && MBEDTLS_LEGACY_CRYPTO_C && NRF_SECURITY) || (MBEDTLS_ECP_C && !(NRF_SECURITY ||
NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS)
|| (MBEDTLS_ECP_C && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN &&
MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS && 0)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MBEDTLS_ECDSA_C and/or look up
MBEDTLS_ECDSA_C in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: MBEDTLS_SHA256_C (defined at C:/ncs/v2.6.1/nrf\subsys\nrf_security\Kconfig.legacy:718) was
assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies:
MBEDTLS_LEGACY_CRYPTO_C (=n), NRF_SECURITY (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MBEDTLS_SHA256_C and/or look up
MBEDTLS_SHA256_C in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: UART_CONSOLE (defined at drivers/console/Kconfig:43) was assigned the value 'y' but got the
value 'n'. Check these unsatisfied dependencies: CONSOLE (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_CONSOLE and/or look up UART_CONSOLE in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.


warning: PRINTK (defined at subsys/debug/Kconfig:204) was assigned the value 'n' but got the value
'y'. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_PRINTK and/or look up PRINTK in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.

Parsing C:/ncs/v2.6.1/bootloader/mcuboot/boot/zephyr/Kconfig
Loaded configuration 'C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp_defconfig'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/mcuboot/prj.conf'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/mcuboot/boards/nrf5340dk_nrf5340_cpuapp.conf'
Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/pcd/pcd.conf'
Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/partition_manager/ext_flash_mcuboot_secondary.conf'
Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/partition_manager/partition_manager_enabled.conf'
Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/misc/generated/extra_kconfig_options.conf'
Configuration saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/.config'
Kconfig header saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/include/generated/autoconf.h'
-- Found GnuLd: c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38")
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
MCUBoot bootloader key file: C:/ncs/v2.6.1/bootloader/mcuboot/root-ec-p256.pem
-- Configuring done
-- Generating done
-- Build files have been written to: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot
=== child image mcuboot -  end ===

CMake Warning at C:/ncs/v2.6.1/nrf/modules/mcuboot/CMakeLists.txt:382 (message):
  

          ---------------------------------------------------------
          --- WARNING: Using default MCUBoot key, it should not ---
          --- be used for production.                           ---
          ---------------------------------------------------------
          



-- OpenThread Source Directory: C:/ncs/v2.6.1/modules/lib/openthread
-- OT_APP_CLI=ON
-- OT_APP_NCP=ON
-- OT_APP_RCP=ON
-- OT_FTD=OFF
-- OT_MTD=ON
-- OT_RCP=ON
-- - - - - - - - - - - - - - - - -
-- OpenThread ON/OFF/Unspecified Configs
-- OT_15_4=ON --> OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE=1
-- OT_ANDROID_NDK=""
-- OT_ANYCAST_LOCATOR=OFF --> OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE=0
-- OT_ASSERT=OFF --> OPENTHREAD_CONFIG_ASSERT_ENABLE=0
-- OT_BACKBONE_ROUTER=OFF --> OPENTHREAD_CONFIG_BACKBONE_ROUTER_ENABLE=0
-- OT_BACKBONE_ROUTER_DUA_NDPROXYING=OFF --> OPENTHREAD_CONFIG_BACKBONE_ROUTER_DUA_NDPROXYING_ENABLE=0
-- OT_BACKBONE_ROUTER_MULTICAST_ROUTING=OFF --> OPENTHREAD_CONFIG_BACKBONE_ROUTER_MULTICAST_ROUTING_ENABLE=0
-- OT_BLE_TCAT=OFF --> OPENTHREAD_CONFIG_BLE_TCAT_ENABLE=0
-- OT_BORDER_AGENT=OFF --> OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE=0
-- OT_BORDER_AGENT_ID=""
-- OT_BORDER_ROUTER=OFF --> OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE=0
-- OT_BORDER_ROUTING=OFF --> OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE=0
-- OT_BORDER_ROUTING_DHCP6_PD=OFF --> OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_ENABLE=0
-- OT_BORDER_ROUTING_COUNTERS=OFF --> OPENTHREAD_CONFIG_IP6_BR_COUNTERS_ENABLE=0
-- OT_CHANNEL_MANAGER=OFF --> OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE=0
-- OT_CHANNEL_MONITOR=OFF --> OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE=0
-- OT_COAP=ON --> OPENTHREAD_CONFIG_COAP_API_ENABLE=1
-- OT_COAP_BLOCK=OFF --> OPENTHREAD_CONFIG_COAP_BLOCKWISE_TRANSFER_ENABLE=0
-- OT_COAP_OBSERVE=OFF --> OPENTHREAD_CONFIG_COAP_OBSERVE_API_ENABLE=0
-- OT_COAPS=ON --> OPENTHREAD_CONFIG_COAP_SECURE_API_ENABLE=1
-- OT_COMMISSIONER=ON --> OPENTHREAD_CONFIG_COMMISSIONER_ENABLE=1
-- OT_CSL_AUTO_SYNC=ON --> OPENTHREAD_CONFIG_MAC_CSL_AUTO_SYNC_ENABLE=1
-- OT_CSL_DEBUG=OFF --> OPENTHREAD_CONFIG_MAC_CSL_DEBUG_ENABLE=0
-- OT_CSL_RECEIVER=ON --> OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE=1
-- OT_CSL_RECEIVER_LOCAL_TIME_SYNC=OFF --> OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_LOCAL_TIME_SYNC=0
-- OT_DATASET_UPDATER=OFF --> OPENTHREAD_CONFIG_DATASET_UPDATER_ENABLE=0
-- OT_DEVICE_PROP_LEADER_WEIGHT=OFF --> OPENTHREAD_CONFIG_MLE_DEVICE_PROPERTY_LEADER_WEIGHT_ENABLE=0
-- OT_DHCP6_CLIENT=ON --> OPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE=1
-- OT_DHCP6_SERVER=ON --> OPENTHREAD_CONFIG_DHCP6_SERVER_ENABLE=1
-- OT_DIAGNOSTIC=ON --> OPENTHREAD_CONFIG_DIAG_ENABLE=1
-- OT_DNS_CLIENT=ON --> OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE=1
-- OT_DNS_CLIENT_OVER_TCP=OFF --> OPENTHREAD_CONFIG_DNS_CLIENT_OVER_TCP_ENABLE=0
-- OT_DNS_DSO=OFF --> OPENTHREAD_CONFIG_DNS_DSO_ENABLE=0
-- OT_DNS_UPSTREAM_QUERY=OFF --> OPENTHREAD_CONFIG_DNS_UPSTREAM_QUERY_ENABLE=0
-- OT_DNSSD_SERVER=OFF --> OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE=0
-- OT_DUA=ON --> OPENTHREAD_CONFIG_DUA_ENABLE=1
-- OT_ECDSA=ON --> OPENTHREAD_CONFIG_ECDSA_ENABLE=1
-- OT_EXTERNAL_HEAP=ON --> OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE=1
-- OT_FIREWALL=OFF --> OPENTHREAD_POSIX_CONFIG_FIREWALL_ENABLE=0
-- OT_HISTORY_TRACKER=OFF --> OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE=0
-- OT_IP6_FRAGM=ON --> OPENTHREAD_CONFIG_IP6_FRAGMENTATION_ENABLE=1
-- OT_JAM_DETECTION=ON --> OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE=1
-- OT_JOINER=ON --> OPENTHREAD_CONFIG_JOINER_ENABLE=1
-- OT_LINK_METRICS_INITIATOR=ON --> OPENTHREAD_CONFIG_MLE_LINK_METRICS_INITIATOR_ENABLE=1
-- OT_LINK_METRICS_MANAGER=OFF --> OPENTHREAD_CONFIG_LINK_METRICS_MANAGER_ENABLE=0
-- OT_LINK_METRICS_SUBJECT=ON --> OPENTHREAD_CONFIG_MLE_LINK_METRICS_SUBJECT_ENABLE=1
-- OT_LINK_RAW=ON --> OPENTHREAD_CONFIG_LINK_RAW_ENABLE=1
-- OT_LOG_LEVEL_DYNAMIC=OFF --> OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE=0
-- OT_MAC_FILTER=ON --> OPENTHREAD_CONFIG_MAC_FILTER_ENABLE=1
-- OT_MESH_DIAG=OFF --> OPENTHREAD_CONFIG_MESH_DIAG_ENABLE=0
-- OT_MESSAGE_USE_HEAP=OFF --> OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE=0
-- OT_MLE_LONG_ROUTES=OFF --> OPENTHREAD_CONFIG_MLE_LONG_ROUTES_ENABLE=0
-- OT_MLR=ON --> OPENTHREAD_CONFIG_MLR_ENABLE=1
-- OT_MULTIPAN_RCP=OFF --> OPENTHREAD_CONFIG_MULTIPAN_RCP_ENABLE=0
-- OT_MULTIPLE_INSTANCE=OFF --> OPENTHREAD_CONFIG_MULTIPLE_INSTANCE_ENABLE=0
-- OT_NAT64_BORDER_ROUTING=OFF --> OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE=0
-- OT_NAT64_TRANSLATOR=OFF --> OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE=0
-- OT_NEIGHBOR_DISCOVERY_AGENT=OFF --> OPENTHREAD_CONFIG_NEIGHBOR_DISCOVERY_AGENT_ENABLE=0
-- OT_NETDATA_PUBLISHER=OFF --> OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE=0
-- OT_NETDIAG_CLIENT=ON --> OPENTHREAD_CONFIG_TMF_NETDIAG_CLIENT_ENABLE=1
-- OT_OPERATIONAL_DATASET_AUTO_INIT=ON --> OPENTHREAD_CONFIG_OPERATIONAL_DATASET_AUTO_INIT=1
-- OT_OTNS=OFF --> OPENTHREAD_CONFIG_OTNS_ENABLE=0
-- OT_PING_SENDER=ON --> OPENTHREAD_CONFIG_PING_SENDER_ENABLE=1
-- OT_PLATFORM_BOOTLOADER_MODE=OFF --> OPENTHREAD_CONFIG_PLATFORM_BOOTLOADER_MODE_ENABLE=0
-- OT_PLATFORM_KEY_REF=ON --> OPENTHREAD_CONFIG_PLATFORM_KEY_REFERENCES_ENABLE=1
-- OT_PLATFORM_NETIF=OFF --> OPENTHREAD_CONFIG_PLATFORM_NETIF_ENABLE=0
-- OT_PLATFORM_POWER_CALIBRATION=OFF --> OPENTHREAD_CONFIG_PLATFORM_POWER_CALIBRATION_ENABLE=0
-- OT_PLATFORM_UDP=OFF --> OPENTHREAD_CONFIG_PLATFORM_UDP_ENABLE=0
-- OT_REFERENCE_DEVICE=OFF --> OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE=0
-- OT_SERVICE=ON --> OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE=1
-- OT_SETTINGS_RAM=OFF --> OPENTHREAD_SETTINGS_RAM=0
-- OT_SLAAC=ON --> OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE=1
-- OT_SNTP_CLIENT=ON --> OPENTHREAD_CONFIG_SNTP_CLIENT_ENABLE=1
-- OT_SRP_ADV_PROXY=""
-- OT_SRP_CLIENT=ON --> OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE=1
-- OT_SRP_SERVER=OFF --> OPENTHREAD_CONFIG_SRP_SERVER_ENABLE=0
-- OT_TCP=OFF --> OPENTHREAD_CONFIG_TCP_ENABLE=0
-- OT_TIME_SYNC=OFF --> OPENTHREAD_CONFIG_TIME_SYNC_ENABLE=0
-- OT_TREL=OFF --> OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE=0
-- OT_TX_BEACON_PAYLOAD=OFF --> OPENTHREAD_CONFIG_MAC_OUTGOING_BEACON_PAYLOAD_ENABLE=0
-- OT_TX_QUEUE_STATS=OFF --> OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_ENABLE=0
-- OT_UDP_FORWARD=ON --> OPENTHREAD_CONFIG_UDP_FORWARD_ENABLE=1
-- OT_UPTIME=OFF --> OPENTHREAD_CONFIG_UPTIME_ENABLE=0
-- - - - - - - - - - - - - - - - -
-- OT_PLATFORM="zephyr"
-- OT_THREAD_VERSION="1.2" -> OPENTHREAD_CONFIG_THREAD_VERSION=OT_THREAD_VERSION_1_2
-- OT_LOG_LEVEL=""
-- OT_LOG_OUTPUT=""
-- OT_VENDOR_NAME=""
-- OT_VENDOR_MODEL=""
-- OT_VENDOR_SW_VERSION=""
-- OT_POWER_SUPPLY="EXTERNAL" --> OPENTHREAD_CONFIG_DEVICE_POWER_SUPPLY=OT_POWER_SUPPLY_EXTERNAL
-- OT_MLE_MAX_CHILDREN=""
-- OT_RCP_RESTORATION_MAX_COUNT=""
-- OT_RCP_TX_WAIT_TIME_SECS=""
-- Package Name: OPENTHREAD
-- Setting default package version: b9dcdbca4
-- Package Version: b9dcdbca4
-- libmetal version: 1.4.0 (D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread)
-- Build type:
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- Looking for include file stdatomic.h
-- Looking for include file stdatomic.h - found
-- open-amp version: 1.4.0 (C:/ncs/v2.6.1/modules/lib/open-amp/open-amp)
-- Host:    Windows/AMD64
-- Target:  Generic/arm
-- Machine: arm
-- C_FLAGS :  -Wall -Wextra
-- Looking for include file fcntl.h
-- Looking for include file fcntl.h - found
CMake Warning at C:/ncs/v2.6.1/zephyr/CMakeLists.txt:862 (message):
  No SOURCES given to Zephyr library: drivers__rtc

  Excluding target from build.


-- Found partition manager static configuration: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/pm_static.yml
Partition 'mcuboot' is not included in the dynamic resolving since it is statically defined.
Dropping partition 'hw_unique_key_partition' since its size is 0.
CMake Warning at C:/ncs/v2.6.1/nrf/cmake/partition_manager.cmake:601 (message):
  Could not find memory mapped address for XIP.  Generated update hex files
  will not have the correct base address.  Hence they can not be programmed
  directly to the external flash
Call Stack (most recent call first):
  C:/ncs/v2.6.1/zephyr/cmake/modules/kernel.cmake:248 (include)
  C:/ncs/v2.6.1/zephyr/cmake/modules/zephyr_default.cmake:138 (include)
  C:/ncs/v2.6.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  C:/ncs/v2.6.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:17 (find_package)


-- Configuring done
-- Generating done
-- Build files have been written to: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build
←[92m-- west build: building application
[2/809] Generating include/generated/version.h
-- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr), build: v3.5.99-ncs1-1
[11/809] Performing build step for 'multiprotocol_rpmsg_subimage'
[0/287] Generating signing key
[2/287] Creating public key from private key used for signing
[3/287] Generating include/generated/version.h
-- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr), build: v3.5.99-ncs1-1
[6/287] Creating data to be provisioned to the Bootloader, storing to provision.hex
[15/287] Performing build step for 'b0n_subimage'
[2/137] Generating include/generated/version.h
-- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr), build: v3.5.99-ncs1-1
[102/137] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v2.6.1/modules/hal/nordic/nrfx/mdk/system_nrf534[104/137] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v2.6.1/modules/hal/nordic/nrfx/drivers/src/nrfx_[106/137] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v2.6.1/modules/hal/nordic/nrfx/drivers/src/nrfx_[109/137] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v2.6.1/modules/hal/nordic/nrfx/drivers/src/nrfx_[137/137] Linking C executable zephyr\zephyr.elf
Memory region         Used Size  Region Size  %age Used
           FLASH:       23710 B      34176 B     69.38%
             RAM:        3528 B        64 KB      5.38%
           SRAM1:          0 GB        64 KB      0.00%
        IDT_LIST:          0 GB        32 KB      0.00%
[31/287] Building C object zephyr/drivers/ipm/CMakeFiles/drivers__ipm.dir/ipm_nrfx_ipc.c.obj
C:/ncs/v2.6.1/zephyr/drivers/ipm/ipm_nrfx_ipc.c:247:13: warning: 'gipm_send' defined but not used [-Wunused-function]
  247 | static void gipm_send(uint32_t id)
      |             ^~~~~~~~~
C:/ncs/v2.6.1/zephyr/drivers/ipm/ipm_nrfx_ipc.c:147:12: warning: 'vipm_nrf_init' defined but not used [-Wunused-function]
  147 | static int vipm_nrf_init(const struct device *dev)
      |            ^~~~~~~~~~~~~
C:/ncs/v2.6.1/zephyr/drivers/ipm/ipm_nrfx_ipc.c:140:17: warning: 'vipm_nrf_max_id_val_get' defined but not used [-Wunused-function]
  140 | static uint32_t vipm_nrf_max_id_val_get(const struct device *dev)
      |                 ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.6.1/zephyr/drivers/ipm/ipm_nrfx_ipc.c:135:12: warning: 'vipm_nrf_max_data_size_get' defined but not used [-Wunused-function]
  135 | static int vipm_nrf_max_data_size_get(const struct device *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
[57/287] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/ipc/rpmsg_service/rpmsg_backend.c.obj
C:/ncs/v2.6.1/zephyr/subsys/ipc/rpmsg_service/rpmsg_backend.c:158:13: warning: 'ipm_callback' defined but not used [-Wunused-function]
  158 | static void ipm_callback(const struct device *dev,
      |             ^~~~~~~~~~~~
[216/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_frame_parser.c[222/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_security_write[223/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_ie_writer.c.ob[225/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/ack_generator/nrf_802154_[226/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_precise_ack_ti[230/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_ie_writer.c.ob[232/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_precise_ack_ti[233/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/serialization/CMakeFiles/nrf-802154-serialization.dir/src/nrf_802154_buffer_alloca[236/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/serialization/CMakeFiles/nrf-802154-serialization.dir/src/nrf_802154_buffer_mgr_ds[241/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/serialization/CMakeFiles/nrf-802154-serialization.dir/src/nrf_802154_buffer_mgr_ds[278/287] Linking C executable zephyr\zephyr_pre0.elf
FAILED: zephyr/zephyr_pre0.elf zephyr/zephyr_pre0.map D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/zephyr_pre0.map
cmd.exe /C "cd . && C:\ncs\toolchains\cf2149caf2\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe  -gdwarf-4 @CMakeFiles\zephyr_pre0.rsp -o zephyr\zephyr_pre0.elf  && cmd.exe /C "cd /D D:\jo
iner_dfu_2_6_1\openthread_reset_fix\openthread\build\multiprotocol_rpmsg\zephyr && C:\ncs\toolchains\cf2149caf2\opt\bin\cmake.exe -E true""
c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe: zephyr\zephyr_pre0.elf section `rodata' will not fit in re
gion `FLASH'
c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe: region `FLASH' overflowed by 3436 bytes
collect2.exe: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
[133/809] modules\openthread\build\CMakeFiles\print-ot-config-96e6445.bat 32adaf8e65370a5c
OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE=1
OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE=0
OPENTHREAD_CONFIG_ASSERT_ENABLE=0
OPENTHREAD_CONFIG_BACKBONE_ROUTER_ENABLE=0
OPENTHREAD_CONFIG_BACKBONE_ROUTER_DUA_NDPROXYING_ENABLE=0
OPENTHREAD_CONFIG_BACKBONE_ROUTER_MULTICAST_ROUTING_ENABLE=0
OPENTHREAD_CONFIG_BLE_TCAT_ENABLE=0
OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE=0
OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE=0
OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE=0
OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_ENABLE=0
OPENTHREAD_CONFIG_IP6_BR_COUNTERS_ENABLE=0
OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE=0
OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE=0
OPENTHREAD_CONFIG_COAP_API_ENABLE=1
OPENTHREAD_CONFIG_COAP_BLOCKWISE_TRANSFER_ENABLE=0
OPENTHREAD_CONFIG_COAP_OBSERVE_API_ENABLE=0
OPENTHREAD_CONFIG_COAP_SECURE_API_ENABLE=1
OPENTHREAD_CONFIG_COMMISSIONER_ENABLE=1
OPENTHREAD_CONFIG_MAC_CSL_AUTO_SYNC_ENABLE=1
OPENTHREAD_CONFIG_MAC_CSL_DEBUG_ENABLE=0
OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE=1
OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_LOCAL_TIME_SYNC=0
OPENTHREAD_CONFIG_DATASET_UPDATER_ENABLE=0
OPENTHREAD_CONFIG_MLE_DEVICE_PROPERTY_LEADER_WEIGHT_ENABLE=0
OPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE=1
OPENTHREAD_CONFIG_DHCP6_SERVER_ENABLE=1
OPENTHREAD_CONFIG_DIAG_ENABLE=1
OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE=1
OPENTHREAD_CONFIG_DNS_CLIENT_OVER_TCP_ENABLE=0
OPENTHREAD_CONFIG_DNS_DSO_ENABLE=0
OPENTHREAD_CONFIG_DNS_UPSTREAM_QUERY_ENABLE=0
OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE=0
OPENTHREAD_CONFIG_DUA_ENABLE=1
OPENTHREAD_CONFIG_ECDSA_ENABLE=1
OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE=1
OPENTHREAD_POSIX_CONFIG_FIREWALL_ENABLE=0
OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE=0
OPENTHREAD_CONFIG_IP6_FRAGMENTATION_ENABLE=1
OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE=1
OPENTHREAD_CONFIG_JOINER_ENABLE=1
OPENTHREAD_CONFIG_MLE_LINK_METRICS_INITIATOR_ENABLE=1
OPENTHREAD_CONFIG_LINK_METRICS_MANAGER_ENABLE=0
OPENTHREAD_CONFIG_MLE_LINK_METRICS_SUBJECT_ENABLE=1
OPENTHREAD_CONFIG_LINK_RAW_ENABLE=1
OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE=0
OPENTHREAD_CONFIG_MAC_FILTER_ENABLE=1
OPENTHREAD_CONFIG_MESH_DIAG_ENABLE=0
OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE=0
OPENTHREAD_CONFIG_MLE_LONG_ROUTES_ENABLE=0
OPENTHREAD_CONFIG_MLR_ENABLE=1
OPENTHREAD_CONFIG_MULTIPAN_RCP_ENABLE=0
OPENTHREAD_CONFIG_MULTIPLE_INSTANCE_ENABLE=0
OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE=0
OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE=0
OPENTHREAD_CONFIG_NEIGHBOR_DISCOVERY_AGENT_ENABLE=0
OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE=0
OPENTHREAD_CONFIG_TMF_NETDIAG_CLIENT_ENABLE=1
OPENTHREAD_CONFIG_OPERATIONAL_DATASET_AUTO_INIT=1
OPENTHREAD_CONFIG_OTNS_ENABLE=0
OPENTHREAD_CONFIG_PING_SENDER_ENABLE=1
OPENTHREAD_CONFIG_PLATFORM_BOOTLOADER_MODE_ENABLE=0
OPENTHREAD_CONFIG_PLATFORM_KEY_REFERENCES_ENABLE=1
OPENTHREAD_CONFIG_PLATFORM_NETIF_ENABLE=0
OPENTHREAD_CONFIG_PLATFORM_POWER_CALIBRATION_ENABLE=0
OPENTHREAD_CONFIG_PLATFORM_UDP_ENABLE=0
OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE=0
OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE=1
OPENTHREAD_SETTINGS_RAM=0
OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE=1
OPENTHREAD_CONFIG_SNTP_CLIENT_ENABLE=1
OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE=1
OPENTHREAD_CONFIG_SRP_SERVER_ENABLE=0
OPENTHREAD_CONFIG_TCP_ENABLE=0
OPENTHREAD_CONFIG_TIME_SYNC_ENABLE=0
OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE=0
OPENTHREAD_CONFIG_MAC_OUTGOING_BEACON_PAYLOAD_ENABLE=0
OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_ENABLE=0
OPENTHREAD_CONFIG_UDP_FORWARD_ENABLE=1
OPENTHREAD_CONFIG_UPTIME_ENABLE=0
OPENTHREAD_CONFIG_THREAD_VERSION=OT_THREAD_VERSION_1_2
OPENTHREAD_CONFIG_DEVICE_POWER_SUPPLY=OT_POWER_SUPPLY_EXTERNAL
OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS=0
OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS_MANAGEMENT=0
PACKAGE_NAME=OPENTHREAD
OPENTHREAD_CONFIG_NCP_HDLC_ENABLE=1
KERNEL
__ZEPHYR__=1
_FORTIFY_SOURCE=1
_ANSI_SOURCE
__LINUX_ERRNO_EXTENSIONS__
USE_PARTITION_MANAGER=1
__PROGRAM_START
NRF5340_XXAA_APPLICATION
NRF5340_XXAA_APPLICATION
NRF_SKIP_FICR_NS_COPY_TO_RAM
MBEDTLS_CONFIG_FILE=nrf-config.h
MBEDTLS_PSA_CRYPTO_CONFIG_FILE=nrf-psa-crypto-want-config.h
MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE=nrf-psa-crypto-config.h
NRF_802154_SERIALIZATION_HOST=1
NRF_802154_USE_RAW_API=1
NRF_802154_PENDING_SHORT_ADDRESSES=16
NRF_802154_PENDING_EXTENDED_ADDRESSES=16
NRF_802154_RX_BUFFERS=16
NRF_802154_TX_STARTED_NOTIFY_ENABLED=1
NRF_802154_ACK_TIMEOUT_ENABLED=1
NRF_802154_CCA_CORR_LIMIT_DEFAULT=2
NRF_802154_CCA_CORR_THRESHOLD_DEFAULT=45
NRF_802154_CCA_ED_THRESHOLD_DEFAULT=45
NRF_802154_SECURITY_KEY_STORAGE_SIZE=3
NRF_802154_CCA_MODE_DEFAULT=NRF_RADIO_CCA_MODE_ED
NRF_802154_ENCRYPTION_ENABLED=1
NRF_802154_SECURITY_WRITER_ENABLED=1
NRF_802154_IE_WRITER_ENABLED=1
NRF_802154_INTERNAL_RADIO_IRQ_HANDLING=0
NRF_802154_CARRIER_FUNCTIONS_ENABLED=0
NRF_802154_ENERGY_DETECTED_VERSION=1
NRF_802154_PLATFORM_ASSERT_INCLUDE=nrf_802154_assert_zephyr.h
NRF_802154_ECB_PRIORITY=-1
NRF_802154_SWI_PRIORITY=1
[235/809] Building CXX object modules/openthread/build/src/core/CMakeFiles/openthread-mtd.dir/meshcop/dataset.cpp.obj
FAILED: modules/nrf/samples/multiprotocol_rpmsg_subimage-prefix/src/multiprotocol_rpmsg_subimage-stamp/multiprotocol_rpmsg_subimage-build multiprotocol_rpmsg/zephyr/zephyr.hex multiprotocol_rpmsg/zeph
yr/zephyr.elf multiprotocol_rpmsg/zephyr/merged_CPUNET.hex D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/modules/nrf/samples/multiprotocol_rpmsg_subimage-prefix/src/mul
tiprotocol_rpmsg_subimage-stamp/multiprotocol_rpmsg_subimage-build D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/zephyr.hex D:/joiner_dfu_2_6
_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/zephyr.elf D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zep
hyr/merged_CPUNET.hex
cmd.exe /C "cd /D D:\joiner_dfu_2_6_1\openthread_reset_fix\openthread\build\multiprotocol_rpmsg && C:\ncs\toolchains\cf2149caf2\opt\bin\cmake.exe --build . --"
[241/809] Building CXX object modules/openthread/build/src/core/CMakeFiles/openthread-mtd.dir/meshcop/dataset.cpp.obj
ninja: build stopped: subcommand failed.
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\cf2149caf2\opt\bin\cmake.EXE' --build 'd:\joiner_dfu_2_6_1\openthread_reset_fix\openthread\build'

 *  The terminal process terminated with exit code: 1. 
 *  Terminal will be reused by tasks, press any key to close it. 